Click thumbnail image for details
|
|
|
|
|
|
|
Argintar Bicep Tenodesis Sleeve
|
Argintar Claw Drill Guide Wire/Suture Passer
|
Arthroscopic Shoulder Rasp
|
Axillary Nerve Protector
|
|
|
|
 |
|
|
|
Bacastow Axillary Nerve Retractor with Suction
|
NEW! Beicker Hammerhead Rongeur
|
Bone Clamp with Speed Lock
|
Burkhead Glenoid Inserter
|
Calvo Olecronon Reducing Forceps
|
|
|
 |
|
|
|
Coated Inserter for Reverse Shoulder Glenosphere Components |
Charnley Type Tissue Needle Forceps
|
Chen Diaphyseal Fracture Reduction Clamp
|
Cobb Elevators
|
Delrin Insert Pliers |
|
|
|
|
|
|
Durham Bone Reduction Clamps |
Freeman Forceps
|
Glenoid Inserter
|
Hooked Bone Awl
|
Humeral Protection Plates
|
|
|
|
|
|
|
Large Bone Clamp with Plate Protection
|
Levy Humeral Stem Extraction Punch
|
Long Bonney Tissue Forceps
|
Mazzara Rongeur for Small Bones
|
Meyer Latarjet Drill Guide & Forceps Assembly
|
|
|
|
|
|
|
Mueller-Type Cement
Removal Instruments
|
Nicholson Small Bone and Shoulder Cement Removal Instruments
|
Nicholson Universal Humeral Prosthesis Extractor
|
Ortho Suction Tube
|
Powers Modified Kocher Clamp
|
|
|
|
|
|
|
Pointed Fracture Reduction Clamps
|
Ring Curettes
|
Sarraf Toothed Curettes
|
Shark Tooth Graspers
|
|
|
|
|
|
|
|
Suprascapular Ligament Cutter
|
NEW! Wiater Shoulder Drape Crossbar
|
NEW! Wiater Shoulder Slide
|
|
|
|
|
Argintar Bicep Tenodesis Sleeve
Designed to help facilitate mini-open sub-pectoral bicep tenodesis—by maintaining the trajectory of the drill with the cerrated end of the sleeve, the drilled humeral holes are easily found with standard percutaneous placement of the bicortical button |
|
|
|
Designed by Evan Argintar, MD |
|
|
|
Once flipped, the slotted cut out in the sleeves makes detachment of the button applicator possible, helping with efficient and reproducible mini-open bicep tenodesis using button technique.
Product No: 5835
Overall Length: 4" (10,2 cm)
External Diameter: 6,35 mm
Internal Diameter: 5 mm
Slot: 2,75 mm
|
|
|
Argintar Claw Drill Guide Wire/Suture Passer
Expandable claw design allows for minimally invasive, reproducible one-step wire/suture passage |
|
|
|
Designed by Evan Argintar MD |
|
|
|
Especially helpful during quad/patella tendon repair surgery and other applications where a suture will be passed—particularly when soft tissue dissection is to be minimized, such as multi-ligament knee reconstruction (MCL/LCL), elbow reconstruction (ULCL/MCL), foot-ankle reconstruction (ATFL), and wrist reconstruction (DRUJ).
Product No: 8315-00 [Set]
Set Includes: (1) Claw & (1) Wire/Suture Pin
Individual Parts:
8315-01 [Claw Unit]
Maximum Internal Opening: 2.5" (6,4 cm)
Product Dimensions: 2.5" x 4" (6,4 cm x 10,2 cm)
1227 [3/32" (2 mm) Pin with Wire/Suture Hole]
Overall Length: 6" (15,2 cm)
|
|
|
Arthroscopic Shoulder Rasp
Used to abrade the anterior scapular neck to stimulate a vascular healing response |
|
|
|
|
|
|
|
Terminal bend matches the angle of the scapular from a standard anterior portal.
Product No: 2310
Overall Length: 9.675" (24,5 cm)
Handle Length: 3.5" (8,9 cm)
|
|
|
Axillary Nerve Protector
Designed for inferior capsular release during shoulder arthroplasty and glenoid exposure |
|
|
|
Designed by Brett Sanders, MD |
|
|
|
The tapered freer end helps separate the axillary nerve and inferior capsule, even in difficult exposures. Non-conductive material allows the use of a bovie knife directly in the small channel cutting guide (on both sides). Reversible for right and left use.
Product No: 8029
Overall Length: 7.125" (18,1 cm)
Width: 12 mm
Thickness: 4 mm
|
|
|
Bacastow Axillary Nerve Retractor with Suction
Designed with a curved tip to slip all the way under the capsule during shoulder surgery, helping to protect the axillary nerve, while also providing suction of smoke away from the surgical site |
|
|
|
Designed by David Bacastow, MD |
|
|
|
Made of autoclavable Radel material, the unit is non-conductive of current and resists the high temperatures associated with the use of electrocautery.
Product No: 8739
Overall Length: 11" (27,9 cm)
Width: .5" (12,7 mm)
Tongue Length: 1.2" (30 mm)
|
|
|
Beicker Hammerhead Rongeur
Designed to help remove osteophytes from around the acetabulum, tibia, and glenoid |
|
|
|
Designed by Clint Beicker, MD |
|
|
|
Product No: 1775-05
Overall Length: 8" (20,3 cm)
Jaw Bite: 15 mm x 7 mm
|
|
|
Bone Clamp with Speed Lock
Designed to help hold a bone in position for reduction |
|
|
|
|
|
|
|
Product No: 3659
Overall Length: 9.125 (23,2 cm)
|
|
|
Burkhead Glenoid Inserter
Designed to help insert a glenoid component |
|
|
|
Designed by Wayne Burkhead, Jr, MD, Michael Radon, and Aaron Merges |
|
|
|
Product No: 4689
Overall Length: 9.875" (25,1 cm)
|
|
|
Calvo Olecronon Reducing Forceps
Designed to reduce and hold in place transverse fractures of the olecranon to facilitate the insertion of k-wires and tension bands |
|
|
|
Designed by Ignacio J.Calvo, MD |
|
|
|
Also very useful in malleolus fractures.
Product No’s:
1801-L [Left]
1801-R [Right]
|
|
|
Coated Inserter for Reverse Shoulder Glenosphere Components
Designed to aid in the insertion of glenospheres in limited exposure patients, allowing for insertion from the side, and coated to help protect marring component surfaces |
|
|
|
Designed by Michael Radon, Ilya Voloshin, MD,
and Nathan Mineo |
|
|
|
Product No: 5071
Overall Length: 9.5" (24,1 cm)
Inserter Arm Angle: 30°
|
|
|
Charnley Type Tissue Needle Forceps
Helpful for wound closure in deep areas with fascia under tension, the forceps can help retrieve a needle in a tight spot
|
|
|
|
Designed by Amal Das Jr., MD
|
|
|
|
Product No: 1165
Overall Length: 6.875" (17,5 cm)
|
|
|
Chen Diaphyseal Fracture Reduction Clamp
Designed to facilitate and maintain reduction of the internal fixation of diaphyseal and meta-diaphyseal fractures of long bones
|
|
|
|
Designed by Franklin Chen, MD |
|
|
|
Works especially well with short oblique ones while providing room to implement the plate with this bone clamp still in place.
• Pivoting pads accommodate metaphyseal fractures
• The quick release enables adjustment without losing reduction
• Helps provide provisional reduction of diaphyseal fractures – humeral shaft fractures, tibial fractures
Product No: 1808
Overall Length: 9.25" (23,5 cm)
Arm Downward Offset: 15 mm
Pad Dimensions: 1" x .375" (25,4 cm x 1 cm)
|
|
|
Cobb Elevators
|
|
|
|
|
|
|
|
Ultra hard titanium nitride coating helps to extend blade life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
With Teeth:
3432 [1/2" with Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1/2" (13 mm)
3434 [1" with Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1" (25,4 mm)
Without Teeth:
3436 [1/2" without Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1/2" (13 mm)
3438 [1" without Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1" (25,4 mm)
|
|
|
Delrin Insert Pliers
Designed to grasp an implant for adjustment without marring the implant surface |
|
|
|
|
|
|
|
Product No: 2025
Overall Length: 8" (20,3 cm)
Replacement Part:
2025-03 [Replacement Insert]
Includes top and bottom delrin jaws,
two screws and a hex wrench
|
|
|
Durham Bone Reduction Clamps
Allows application of a bone plate without removing the reduction clamp |
|
|
|
Designed by Alfred A. Durham, MD |
|
|
|
The standard clamp is designed for medium size bones such as the fibula, ulna, and radius.
The large clamp with speedlock is designed for large bones such as the femur and tibia.
Product No's:
3652 [Standard]
Overall Length: 7" (17,8 cm)
3652-01 [Large with Speedlock]
Overall Length: 9.25" (32,5 cm)
|
|
|
Freeman Forceps
Designed to help with hand pain, fatigue, and hand arthritis
|
|
|
|
Designed by Carl R. Freeman, MD
|
|
|
|
|
Allows surgeons to utilize a forceps or pickup type instrument using a more mechanically and ergonomically favorable grip. Forceps can be used with a full-hand grip or “palmed.”
Product No: 1174
Overall Length: 6.875" (17,5 cm)
|
|
|
Glenoid Inserter
Designed for final implantation of the gleniod prosthesis
|
|
|
|
Designed by Chase Kuhn & J. Kevin Rudder, MD
|
|
|
 |
Grasping ends are coated to help protect from scratching the component surfaces.
Product No: 5076
Overall Length: 8.5" (21,6 cm)
|
|
|
Hooked Bone Awl
"Shoulder hook" awls designed to help with manipulation of bone fragments for fixation |
|
|
|
Designed by Reza Firoozabadi, MD |
|
|
|
Above: long hooked bone awl being used to assist with reduction of the pubic symphysis in the setting of a t-type acetabular fracture.
|
Product No's
5078 [Standard]
Overall Length: 10.5" (26,7 cm)
Handle Length: 5" (12,7 cm)
5078-01 [Long]
Overall Length: 13.375" (34 cm)
Handle Length: 6" (15,2 cm)
Above: standard hooked bone awl being used to gain length to assist with reduction of a fibula fracture. A 2mm pilot hole is made to seat the tip of the bone awl.
Above: long hooked bone awl being used to lateralize proximal fragment, while spike pusher being used distally to medialize distal fragment. Of note the long hooked bone awl is used to minimize radiation to the surgeons hands.
|
|
|
Humeral Protection Plates
Helps protect the proximal humerus from fracture after humeral head osteotomy
|
|
|
|
Designed by Ronald E. Delanois, MD |
|
|
|
Plate is placed on the proximal humerus after the initial osteotomy of the humeral head for total shoulder replacement. Helps protect the proximal humerus from fracture as the humerus is retracted to gain visualization of the glenoid to prepare it for a glenoid implant.
Product No's:
5259-01 [46 mm]
5259-02 [50 mm]
|
|
|
Large Bone Clamp with Plate Protection
Designed to help hold a bone/bone plate in position for reduction—the one-side coated jaw helps to protect from marring the bone plate |
|
|
|
|
|
|
 |
Left Coated and Right Coated Available
Product No's:
3659-L [Left]
Overall Length: 9.125 (23,2 cm0
3659-R [Right]
Overall Length: 9.125 (23,2 cm)
|
|
|
Levy Humeral Stem Extraction Punch
Ultra hard cobalt chrome shaft and impactor tip designed to help remove a humeral stem during revision total shoulder arthroplasty |
|
|
|
Designed by Jonathan Levy, MD |
|
|
|
Can be used to open up distal cement mantle or pedestal during revisions.
Product No: 8627
Overall Length: 12" (30,5 cm)
Handle/Platform Length: 4.75" (12,1 cm)
Punch Rod Length: 7.25" (18,4 cm)
Platform: 3" x .75" (7,6 cm x 1,9 cm)
Shaft Diameter: 8 mm, tapers to 4 mm at tip
|
|
|
Long Bonney Tissue Forceps
Extra length—3" (7,6 cm) more than standard—allows for use in deep wound areas |
|
|
|
|
|
|
 |
Product No: 5040
Overall Length: 10" (25,4 cm)
|
|
|
Mazzara Rongeur for Small Bones
Designed for bone and soft tissue removal in small joint surgery, the small pistol grip handle lessens hand fatigue and slippage, and allows for better visualization |
|
|
|
Designed by James T. Mazzara, MD |
|
|
|
Product No's:
1765-04 [2 x 10 mm Jaw]
Jaw Bite: 2 x 10 mm
Overall Length: 7.25" (18,4 cm)
1765-05 [4 x 10 mm Jaw]
Jaw Bite: 4 x 10 mm
Overall Length: 7.25" (18,4 cm)
|
|
|
Meyer Latarjet Drill Guide & Forceps Assembly
Aiming device for flush positioning of a bone block with a joint surface |
|
|
|
Designed by Professor Dominik Meyer |
|
|
|
Product No's:
5257-00 [Small Set]
Small Set Includes:
5257-01 [Latarjet Forceps – Small]
Overall Length: 5.875" (14,9 cm)
Tongue and Clamp Arm Width: .22" (5.6 mm)
5257-02 [Latarjet Drill Guide – Small]
Overall Length: 8.5" (21,6 cm)
Drill Hole Diameter: 3.5 mm
Distance between Drill Holes: .390" (9,9 mm)
1025 [Case]
5258-00 [Large Set]
Large Set Includes:
5258-01 [Latarjet Forceps – Large]
Overall Length: 5.875" (14,9 cm)
Tongue and Clamp Arm Width: .32" (8.15 mm)
5258-02 [Latarjet Drill Guide – Large]
Overall Length: 8.5" (21,6 cm)
Drill Hole Diameter: 3.5 mm
Distance between Drill Holes: .492" (12,5 mm)
1025 [Case]
|
|
|
Mueller-Type Cement Removal Instruments
Used for cement removal in the knee, hip, and shoulder
|
|
|
|
|
|
|
|
Product No's
S7500-00 [Complete Set with Case] Non-CE Countries
S7500-01 [Complete Set with Case] CE Countries
(Top to Bottom):
1) Narrow Cement Removal Gouge, Short
Product No: S7505
Shaft Length: 15 cm
Gouge: 9 mm, negative
2) Narrow Cement Removal Gouge, Long
Product No: S7507
Shaft Length: 24 cm
Gouge: 9 mm, negative
3) Narrow Offset Cement Removal Gouge
Product No: S7510
Shaft Length: 24 cm
Gouge: 9 mm, negative
4) Acetabular Chisel
Product No: S7515
Shaft Length: 24 cm
Chisel: 7.5 mm
5) Offset Chisel
Product No: S7520
Shaft Length: 15 cm
Chisel: 9 mm
6) Flared Angle Gouge
Product No: S7525
Shaft Length: 24 cm
Gouge: 9 mm, positive, angle 15° downward
7) Wide Gouge
Product No: S7530
Shaft Length: 24 cm
Gouge: 11.5 mm, negative
8) “V” Splitter
Product No: S7535
V-Shaped Chisel: 7 mm
9) Saddle Punch
Product No: S7587
Shaft Length: 24 cm
Punch: 16.5 mm x 6.5 mm
10) Cement Splitting Osteotome
Product No: S7590
Shaft Length: 24 cm
11) Cement Removal Osteotome, Short
Product No: S7595
Shaft Length: 15 mm
Osteotome: 8 mm
12) Cement Removal Osteotome, Long
Product No: S7597
Shaft Length: 24 cm
Osteotome: 8 mm
13) 4.4mm Drill
Product No: S7540
14) 4.4mm Drill Guide
Product No: S7545
15) 6.4mm Drill
Product No: S7550
16) 6.4mm Drill Guide
Product No: S7555
17) Straight Cement Removal Hook
Product No: S7560
Hook Curette: 10 mm
18) Curved Cement Removal Hook
Product No: S7565
Hook Curette: 10 mm
19) Cross Bar
Product No: S7570
20) 7mm T-Handle Conical Tap
Product No: S7575
21) 9mm T-Handle Conical Tap
Product No: S7580
22) Slotted Mallet
Product No: S7585
9075 [Case]
Optional Instruments:
8247-00 [T-Handle Chuck & Key]
8247-01 [T-Handle Chuck Only]
8247-02 [Chuck Key Only]
|
|
|
Nicholson Small Bone and Shoulder Cement Removal Instruments
Designed to facilitate cement removal in smaller diameter bone of the humerus, ulna, and smaller implant geometries
|
|
|
|
Designed by Gregory Nicholson, MD |
|
|
|
-
Reverse bevel tip helps the gouge to slide between the bone and cement.
-
T-shaped Gouge-Splitter allows the gouge to slide between the cement and bone and vertically split the cement mantle to facilitate removal.
-
Small diameter widths and curvatures more closely match shoulder and elbow implants and smaller bone diameters.
-
Shorter length allows for better control and access.
-
The Footed Imapctor is used to help remove a humeral implant by impacting the medial collar of the prosthesis. Helps provide a very direct parallel force to the implant for removal.
Product No's:
5251-00 [Complete Set with Case]
Set Includes / Available Individually:
5251-05 [Extra Small Gouge]
Chisel Width: 5 mm
Chisel Depth: .675" (1,6 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5251-07 [Small Gouge]
Chisel Width: 7 mm
Chisel Depth: 1" (2,5 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5251-09 [Medium Gouge]
Chisel Width: 9 mm
Chisel Depth: 1" (2,5 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5251-11 [Large Gouge]
Chisel Width: 11 mm
Chisel Depth: 1" (2,5 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5252-07 [Small Gouge w/Splitter]
Chisel Width: 7 mm
Splitter Height: 4 mm
Chisel Depth: 1" (2,5 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5252-09 [Medium Gouge w/Splitter]
Chisel Width: 9 mm
Splitter Height: 5 mm
Chisel Depth: 1" (2,5 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5252-11 [Large Gouge w/Splitter]
Chisel Width: 11 mm
Splitter Height: 6 mm
Chisel Depth: 1" (2,5 cm)
Overall Length: 9.25" (22,9 cm)
Handle Length: 4" (10,2 cm)
5254 [Backhook]
Overall Length: 12.5" (31,8 cm)
Handle Length: 4.5" (11,4 cm)
Shaft Diameter: 4 mm
5255 [Footed Impactor]
Foot Pad Size: 8.5 mm x 11.5 mm
Shaft Diameter: 8.5 mm
Overall Length: 12.75" (32,4 cm)
Handle Length: 4.5" (11,4 cm) |
|
5253 [Case Only for Complete Set]
Download Product Brochure (PDF)
|
| |
|
|
|
|
Nicholson Universal Humeral Prosthesis Extractor
Designed to fit most humeral prostheses |
|
|
|
Designed by Gregory Nicholson, MD |
|
|
|
|
|
|
Ortho Suction Tube
Very effective for suction and minor retracting
|
|
|
|
Designed by T. Eickmann, MD
|
|
|
|
|
Helps eliminate plugging due to bone, cement fragments, blood clots, etc.
Product No: 5465
Overall Length: 9.25" (23,5 cm)
End Hole Diameter: 1 mm
Side Hole Diameter: 1.5 mm
|
|
|
Pointed Fracture Reduction Clamps
Versatile set of fracture reduction clamps, each with a specific tine design that allows for appropriate vector placement so that anatomic reduction can be obtained in a number of different types of fractures |
|
|
|
Designed by Reza Firoozabadi, MD, MA |
|
|
1.9 mm tines allow for a snug fit in 2 mm drill holes.
Tines angled to prevent clamp “slippage” with compression.
Straight tines can be placed deep within bone which allows for far cortex compression.
Example applications: any transverse fracture (straight-straight clamp), both bone forearm fractures, olecranon fractures, medial malleolus fractures, and many more.
Speed Lock Style: Extra-long spin down allows for increased range of clamp use, and open-topped joint rotates to allow for increased range of opening, and also allows for quick release |
|
Two styles — Speed Lock and Ratchet — each available in four tine configurations.
Product No’s:
SMALL WITH SPEED LOCK MECHANISM:
3666 [Straight Left & Right]
Overall Length: 5.5" (14 cm)
3667 [Curved Left & Right]
Overall Length: 5.5" (14 cm)
3666-L [Curved Left, Straight Right]
Overall Length: 5.5" (14 cm)
3666-R [Straight Left, Curved Right]
Overall Length: 5.5" (14 cm)
SMALL WITH RATCHET MECHANISM:
3668 [Straight Left & Right]
Overall Length: 5.5" (14 cm)
3669 [Curved Left & Right]
Overall Length: 5.5" (14 cm)
3668-L [Curved Left, Straight Right]
Overall Length: 5.5" (14 cm)
3668-R [Straight Left, Curved Right]
Overall Length: 5.5" (14 cm)
MEDIUM WITH SPEED LOCK MECHANISM:
3666-01 [Straight Left & Right]
Overall Length: 7" (17,8 cm)
3667-01 [Curved Left & Right]
Overall Length: 7" (17,8 cm)
3666-L-01 [Curved Left, Straight Right]
Overall Length: 7" (17,8 cm)
3666-R-01 [Straight Left, Curved Right]
Overall Length: 7" (17,8 cm)
|
|
|
Powers Modified Kocher Clamp
Heavier design allows for a firmer grasping of bone and soft tissues |
|
|
|
Designed by Mark Powers, MD |
|
|
|
Product No's:
1813 [Tapered Jaw]
Overall Length: 8.25" (21 cm)
Jaw Length: 2.5" (6,4 cm)
Jaw at End: 5.2 mm x 4.1 mm
1813-01 [Tapered Narrow Jaw]
Overall Length: 8.25" (21 cm)
Jaw Length: 2.5" (6,4 cm)
Jaw at End: 5.2 mm x 3 mm
1814 [Square Jaw]
Overall Length: 8.25" (21 cm)
Jaw Length: 2.5" (6,4 cm)
Jaw at End: 6.5 mm x 5 mm
|
|
|
Ring Curettes
|
|
|
|
|
|
|
|
Product No's:
5150 [Straight, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.75" (22,2 cm)
5152 [Straight, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.75" (22,2 cm)
5154 [Straight, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.75" (22,2 cm)
5156 [Bent, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.5" (21,9 cm)
5157 [Bent, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.5" (21,9 cm)
5158 [Bent, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.5" (21,9 cm)
|
|
|
Sarraf Toothed Curettes
Forward, straight, and reverse bent toothed curettes designed to aid in aid in all types of joint arthroplasty surgery, especially in scraping any articular chondral islands within the acetabulum during THA preparation |
|
|
|
Designed by Khaled Sarraf, MD |
|
|
|
Can also be used for the femoral canal in cemented and uncemented THA.
Valuable aid in revision arthroplasty (hip, knee, shoulder and ankle) for cement curettage.
Useful tool in hip and knee primary arthroplasty as well as shoulder, elbow and ankle arthroplasty procedures.
Ultra hard titanium nitride coating helps to extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
5174-00 [Set]
Also available individually:
5174-F [Forward Toothed Curette]
Overall Length: 11.5" (29,2 cm)
Handle Length: 5.5" (14 cm)
Curette Cup : 8 mm X 12 mm
Angled Down: 30°
5174-R [Reverse Toothed Curette]
Overall Length: 11.5" (29,2 cm)
Handle Length: 5.5" (14 cm)
Curette Cup : 8 mm X 12 mm
Angled Up: 30°
5174-S [Straight Toothed Curette]
Overall Length: 11.5" (29,2 cm)
Handle Length: 5.5" (14 cm)
Curette Cup : 8 mm X 12 mm
|
|
|
Shark Tooth Graspers
Graspers sharp teeth help grasp onto tissue and bone |
|
|
|
Designed by Luis Ulloa |
|
|
|
Helpful in removing the labrum, and osteophytes around the acetabulum and around the glenoid. Also helps to remove meniscus, osteophytes and loose bodies. Helps facilitate working through a small incision without disrupting vision.
Product No’s:
STANDARD HANDLE
1797 [5" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 8" (20,3 cm)
Shaft Length: 5" (12,7 cm)
1798 [7" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
1799 [9" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
1796 [12" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 15" (38,1 cm)
Shaft Length: 12" (30,5 cm)
SMALL GRIP HANDLE
Small Grip Handle designed with the grip closer together for easier gripping and to help reduce hand fatigue.
1798-SG [7" Shaft with Small Grip Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
1799-SG [9" Shaft with Small Grip Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
|
|
|
Stoll Bone Plate Clamp
Designed to help hold a bone or bone plate in position for reduction and fixation—helpful with clavicle and fibula fractures |
|
|
|
Designed by Jordan Stoll, MD |
|
|
|
Product No: 1774
Overall Length: 10" (25,4 cm)
|
|
|
Suprascapular Ligament Cutter
Designed to cut the transverse ligament while helping to protect the suprascapular nerve |
|
|
|
Designed by Michael Craig, OPA-C |
|
|
|
Product No: 1794
Overall Length: 11.25" (28,6 cm)
|
|
|
Wiater Shoulder Drape Crossbar
Designed for use during shoulder surgery in the beach chair position or during other surgical procedures to support and keep the surgical drapes away from the surgical site, maintain a sterile field, and help to allow the anesthesia provider good access to the airway |
|
|
|
Designed by J. Michael Wiater, MD, FAAOS, FAOA |
|
|
|
Product No: 2417
Overall Length: 60" (152,4 cm)
|
|
|
Wiater Shoulder Slide
Designed to help avoid damage to the prosthetic bearing surfaces during dislocation and reduction of a shoulder arthroplasty |
|
|
|
Designed by J. Michael Wiater, MD, FAAOS, FAOA |
|
|
|
Lightweight stainless steel bar with end clamps for attaching to two IV poles.
Product No: 6879
Overall Length: 11" (27,9 cm)
Width: 1.375" (3,5 cm)
|
|
|
© 2023 Innomed, Inc. All rights reserved.
|
