Click thumbnail image for details
|
|
|
|
|
|
Adson Forcep with Cobb Elevator End
|
Aluminum Tapered Maul/Mallet |
Articulated Caliper with Ruler
|
Bates Needle Holder with Suture Cutter
|
Beicker Curette Suction Device
|
|
|
|
|
|
|
|
|
NEW! Bechtold Ergonomic Orthopedic Mallet
|
Bradley Periosteal Elevators
|
Cartilage Grasper
|
Cement Packer & Trimmer
|
Charnley Type Tissue Needle Forceps
|
|
|
|
|
|
|
|
|
Cheng Biopsy Trephine System
|
Cheng Screw Removal and Bone Trephine Set
|
Cobb Elevators
|
Delrin Insert Pliers
|
Depth Gauge
|
|
|
|
|
|
|
Desai Curette Osteotomes
|
Desai Surgical Funnel
|
Dodson Extremity Skin Saver
|
Extended Scalpel Handle
|
Flexible Osteotome System
|
|
|
|
|
|
|
Freeman Forceps
|
Gelpi Retractors
|
Gray Syringe Assist with Ergonomic Handle
|
Hannum Graspers
|
Hendren Self-Retaining Retractor
|
|
|
|
|
|
|
|
|
Incision Aligner
|
Jones Mallet
|
K-Wire Bender/Cutter
|
Kopplin Pain Catheter Insertion Grasper
|
Large T-Handle Fixed Drivers
|
|
|
|
|
|
|
|
|
Light Wands – Short and Small Diameter
|
Lighted Yankaur Suction Device
|
Long Bonney Tissue Forceps
|
Long Jaw Needle Nose Pliers
|
Mazzara Rongeur with Pistol Grip Handle
|
|
|
|
|
|
|
Mengato Depth Gauge
|
NEW! Mini Lexer Gouges
|
Mini-lexer Osteotomes
|
Modified Rongeur with Pistol Grip Handle
|
Modular Weights
|
|
|
|
|
|
|
Modular Impactor Set
|
Ortho Impactors
|
NEW! Ortho Mallets
|
Ortho Mallets with Easy Grip Handles
|
Ortho Mini Chisels
|
|
|
|
|
|
|
|
|
Ortho Mini Gouges
|
Orthopedic Needle Holder/Scissors
|
Ortho Rongeur with Easy Grip Handle
|
Ortho Suction Tube
|
OrthoVise – Large
|
|
 |
|
|
|
|
|
OrthoVise –Small
|
Periosteal Elevator
|
Pin Puller – Small
|
Rake Retractors with Ergonomic Handle
|
Replacement Modular Handle for Dscontinued Infero-Posterior Acetabular Retractors
|
|
|
|
|
|
|
|
|
Retractor Clip for Smoke Evacuation Tube
|
Reusable Light Wand
|
Ring Curettes
|
Roberts Pin Bending Cannula Set
|
NEW! Rose Hamstring Tendon Harvester
|
|
|
|
|
 |
|
Sarraf TiN Coated Cement Removal Forceps
|
Screw Removal Pliers
|
NEW! Screw Removal Pliers
|
Screw/Pin Removal Locking Pliers
|
Seachris Delrin Cement Scraper
|
|
|
|
|
 |
|
Shark Tooth Graspers
|
Soft Impact Mallets
|
Soudry Loose Body Grasper
|
Stanton Needle Driver
|
Star Bit Driver Set
|
|
|
|
|
 |
|
Straight Suture Passer
|
Surgical Spoon
|
Sweed Dissecting Scissors
|
Table Clamps
|
NEW! T-Handle with A0-End
|
|
|
|
|
 |
|
Tissue Graspers with Shark Teeth
|
Torx/Hex Adapter Set
|
Universal Bone Grafting/Impacting Forceps
|
Universal Screwdriver Set
|
Universal Screw Removal Instrument System
|
|
|
|
|
 |
|
Vaughan Endzone Retractor
|
Wagner Osteotome Handle
|
White Aspiration Handle
|
Wide Rake Retractors with Ergonomic Handle
|
Whelan Flexible Chisel Guide
|
|
|
|
|
|
|
Whelan Curved Chisel Guide
|
Wilke Angled Blunt Nose Scissors
|
|
|
|
|
|
Adson Forcep with Cobb Elevator End
Has the advantages of a Cobb tip at the end of an Adson forcep |
|
|
|
Designed by Oscar Castro-Aragon, MD |
|
|
|
Allows the opportunity to do soft tissue dissection, cleaning of the bone or bone fragments in a fracture , push bone fragments to hold a reduction in a fracture , separate soft tissue, and turn it around to pick up tissue without having to switch instruments back and forth.
Product No: 1166
Overall Length: 4.75" (12,1 cm)
Width at Tip" .1" (2,4 mm)
|
|
|
Aluminum Tapered Maul/Mallet
The large surface area allows the surgeon to focus on the action area of the instrument being struck, instead of making sure the mallet will strike the end of the instrument, much like a sculptors mallet |
|
|
|
|
|
|
|
Product No: 7828 [2.5 lbs]
Overall Length: 9.15" (23,2 cm)
Handle Length: 6" (15,2 cm)
End Diameter: 3" (7,6 mm)
|
|
|
Articulated Caliper with Ruler
A highly precise (within 1 mm) device designed for measuring distances between two points — can be used even if there are intervening structures like soft tissue or bone, and in situations where a straight ruler will not work |
|
|
|
Designed by Vincent Y. Ng, MD |
|
|
|
Examples of use include measuring limb length in total hip arthroplasty, confirming length in megaprosthetic knee replacements, and assessing dimensions of allografts.
|
|
|
Bates Needle Holder with Suture Cutter
By trapping the suture and cutting when the forcep is opened, helps to reduce stress on the surgeon’s hand |
|
|
|
Designed by James E. Bates, MD |
|
|
|
-
No switching between needle driver and scissors, or need for assistant to cut sutures for you
-
Cutting with opening of forceps reduces possibility of damage to surrounding tissues
-
Sliding the instrument down to the suture knot allows quick and consistent 2 mm suture tails
-
Slip the suture strands into the suture cutting slot and slide the closed instrument along until desired length of tail is achieved, then open the instrument to cut the sutures
Product No: 3071
Overall Length: 8.125" (20,6 cm)
Jaw Width: .25" (6,4 mm)
Open Jaw Length: .5" (12,8 mm)
|
|
|
Bechtold Ergonomic Orthopedic Mallet
Ergonomically designed for forward and backward strikes, featuring an ergonomic handle with a tamp |
|
|
|
Designed by Dustin Bechtold, MD |
|
|
|
Stainless steel head and shaft with an aluminum handle with a right-handed grip.
Large and small striking heads with smooth surface.
Palmar side of the mallet features a flat surface to slide along a broach or impacting type instrument for back slapping and serves well as an additional striking surface.
Product No: 7822 [2.7 lbs (1,22 kg)]
Weight: 2.7 lbs (1.22 kg)
Overall Length: 10.75" (27,3 cm)
Head Width: 4" (10,2 cm)
Large Head Diameter: 2" (5,1 cm)
Small Head Diameter: 1.5" (3,8 cm)
|
|
|
Beicker Curette Suction Device
Designed to help visualization of a fracture site within a fracture hematoma |
|
|
|
Designed by Clint Beicker, MD |
|
|
|
Also useful for arthroscopic curettage of osteochondral lesions.
Product No: 4231
Overall Length: 10.5" (26,7 cm)
Curette Cup: 7,5 mm x 5,5 mm
|
|
|
Bradley Periosteal Elevator
|
|
|
|
Designed by Gary W. Bradley, MD |
|
|
|
Product No's:
4719 [1/2"]
Overall Length: 11" (27,9 cm)
Blade Width: .5" (13 mm)
4720 [3/4"]
Overall Length: 11" (27,9 cm)
Blade Width: .75" (19 mm)
|
|
|
Cartilage Grasper
Helps to grasp and hold cartilage, tendons, soft tissues and loose bodies |
|
|
|
Shark tooth designed by Luis Ulloa,
design modification by Michael Soudry, MD |
|
|
 |
Product No's:
1785 [Saw Teeth]
Shaft Length: 6" (15,2 cm)
Overall Length: 9.25" (23,5 cm)
1777 [5" with Shark Teeth]
Shaft Length: 5" (12,7 cm)
Overall Length: 8.25" (21 cm)
Jaw Bite: 2 mm x 6.5 mm
1779 [8" with Shark Teeth]
Shaft Length: 8" (20,3 cm)
Overall Length: 11.25" (28,6 cm)
|
|
|
Cement Packer & Trimmer
|
|
|
|
|
|
|
|
|
Product No: 4995
Overall Length: 9.75" (24,8 cm)
|
|
|
Charnley Type Tissue Needle Forceps
Helpful for wound closure in deep areas with fascia under tension, the forceps can help retrieve a needle in a tight spot
|
|
|
|
Designed by Amal Das Jr., MD
|
|
|
|
Product No: 1165
Overall Length: 6.875" (17,5 cm)
|
|
|
Cheng Biopsy Trephine System
Using a threaded K-wire facilitates grasping and removal of a core bone sample for biopsy or core decompression
|
|
|
|
Designed by Edward Cheng, MD
|
|
|
|
|
Designed for use with a standard 1.6mm (.062") threaded K-wire (not included).
-
Allows use of trephine at oblique angles to bone surface by using an anchoring K-wire and cannulated trephine
-
Avoids “skipping” of trephine teeth on bone surface
-
Facilitates optimal approach angle and direction of trephine
-
Variety of core diameters yields bone samples of sufficient size for pathology
-
Adapters allow for use of a power drill
-
Minimally invasive — soft tissue sleeve protects surrounding structures and tissue
-
Can also be used for bone graft harvesting
-
Repositioning guide allows easy adjustment of targeting K-wire
Product No: 1425-00 [Complete Set with Case]
Trephine Internal Diameters: 5mm, 6.5mm, 8mm
Set Includes/Available Separately:
1425-01 [Soft Tissue Protector – Small]
1425-02 [Soft Tissue Protector – Medium]
1425-03 [Soft Tissue Protector – Large]
1425-04 [Dilator – 4.75 mm]
1425-05 [Dilator – 6.25 mm]
1425-06 [Dilator – 7.75 mm]
1425-07 [Dilator – 9.25 mm]
1425-08 [Trephine – Small]
Internal Diameter: 5 mm
Overall Length: 7.125" (18,1 cm)
1425-09 [Trephine – Medium]
Internal Diameter: 6.5 mm
Overall Length: 7.125" (18,1 cm)
1425-10 [Trephine – Lage]
Internal Diameter: 8 mm
Overall Length: 7.125" (18,1 cm)
1425-11 [Drive End – Small]
1425-12 [Drive End – Medium]
1425-13 [Drive End – Large]
1425-14 [Driver Retraction Handle]
Includes (2) Handle Retaining Screws (#1425-14-B-COMP)
1425-15 [3-Hole Wire Repositioning Guide]
1425-Case [Case]
Replacement Part:
1425-14-B-COMP [Handle Retaining Screw]
|
|
|
Cheng Screw Removal and Bone Trephine Set
Six trephine sizes with reverse thread teeth designed to help with removal of screws with minimal bone loss, as well as gathering of core bone samples for biopsy or core decompression |
|
|
|
Designed by Edward Cheng, MD |
|
|
Can be used with the T-handle or with power.
K-wire not included.
For Screw Removal
The trephine ends are designed to fit over embedded screws for extraction with minimal bone loss. Six sizes available — internal diameters of 5 mm, 6.5 mm, 8 mm, 9 mm, 10 mm, and 11 mm. The T-handle allows for precise, controlled use. |
For Core Bone Sampling
Cannulated T-handle and trephines allow use of a standard 1.6 mm (.062") threaded K-wire to help facilitate grasping and removal of a core bone sample for biopsy or core decompression. Variety of core diameters yields bone samples of sufficient size for pathology. K-wire not included. |
|
Product No’s:
1426-00 [Complete Set with Case]
Individual Product Numbers:
1426-01 [5 mm Internal Diameter]
Internal Diameter: 5 mm
Overall Length: 7.125" (18,1 cm)
1426-02 [6.5 mm Internal Diameter]
Internal Diameter: 6.5 mm
Overall Length: 7.125" (18,1 cm)
1426-03 [8 mm Internal Diameter]
Internal Diameter: 8 mm
Overall Length: 7.125" (18,1 cm)
1426-05 [9 mm Internal Diameter]
Internal Diameter: 9 mm
Overall Length: 7.125" (18,1 cm)
1426-06 [10 mm Internal Diameter]
Internal Diameter: 10 mm
Overall Length: 7.125" (18,1 cm)
1426-07 [11 mm Internal Diameter]
Internal Diameter: 11 mm
Overall Length: 7.125" (18,1 cm)
1425-14 [Handle Assembly]
Dimensions: 4" x 2" (10,2 cm x 5,1 cm)
1025 [Sterilization Case]
Replacement Part:
1425-14-B-COMP [Handle Retaining Screw]
|
|
|
Cobb Elevators
|
|
|
|
|
|
|
|
Ultra hard titanium nitride coating helps to extend blade life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
With Teeth:
3432 [1/2" with Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1/2" (13 mm)
3434 [1" with Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1" (25,4 mm)
Without Teeth:
3436 [1/2" without Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1/2" (13 mm)
3438 [1" without Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1" (25,4 mm)
|
|
|
Delrin Insert Pliers
Designed to grasp an implant for adjustment without marring the implant surface |
|
|
|
|
|
|
|
Product No: 2025
Overall Length: 8" (20,3 cm)
Replacement Part:
2025-03 [Replacement Insert]
Includes top and bottom delrin jaws,
two screws and a hex wrench
|
|
|
Depth Gauge
Designed to help provide measurement of the depth/length of any bone hole for proper screw length determination
|
|
|
|
|
|
|
|
Product No: 8015
Overall Length: 7.625" (19,4 cm)
Scale: From 0 to 48 mm
|
|
|
Desai Curette Osteotome
Designed to remove bone and cartilage, helpful for preparing joint surfaces for fusion, allowing easy removal of osteophytes and cartilage without having to switch instruments |
|
|
|
Designed by Sarang Desai, DO |
|
|
|
The osteotome portion also can be used to "feather" the subchondral surface to expose bleeding bone. It is also useful in instances of obtaining autograft, as it can be used to create a bone window and then remove cancellous bone.
Product No’s:
5241 [5 mm]
Overall Length: 8.25" (21 cm)
Handle Length: 4.25" (10,8 mm)
Cup: 5 x 6 mm
Osteotome Width: 3.5 mm
Osteotome Length: 3.5 mm from edge of cup
5242 [8 mm]
Overall Length: 8.25" (21 cm)
Handle Length: 4.25" (10,8 mm)
Cup: 8 x 10 mm
Osteotome Width: 6.5 mm
Osteotome Length: 3 mm from edge of cup
|
|
|
Desai Surgical Funnel
Helps with control and placement of bone graft |
|
|
|
Designed by Sarang Desai, DO |
|
|
|
Made from surgical grade stainless steel (for sterilization purposes).
Product No: 8989
Overall Length: 6.25" (15,9 cm)
Handle Length: 3.25" (8,3 cm)
Funnel Diameter at Top: 3" (7,6 cm)
Funnel Flow-thru Diameter: 11 mm
|
|
|
Dodson Extremity Skin Saver
Designed to help protect the patient's skin when removing a disposable tourniquet |
|
|
|
Designed by Mark A. Dodson, MD |
|
|
|
After the device is laid on the skin, the disposable tourniquet is then rolled over it, and stays in position until removed at the end of the case.
Product No: 8628
Overall Length: 4.75" (12,1 cm)
Width: 1.5" (3,8 cm)
Lip: .5" (1,3 cm)
|
|
|
Extended Scalpel Handle
Long thin scalpel handle used with knife blade to make a skin incision and cut through fascia to help seat trocars to bone |
|
|
|
Designed by Richard Pelliccio, MD |
|
|
|
#10 blade normally used but choice of blade is at surgeons’ discretion. Blade not included.
Product No: 3022
Overall Length: 18.9" (48 cm)
Handle Length: 5.5" (14 cm)
Shaft Diameter: .25" (6,35 cm)
|
|
|
Flexible Osteotome System
Provides various osteotome blades for both hip and knee surgery |
|
|
|
|
|
|
|
Sharp, flexible blades are well suited for loosening implants from cement or bony ingrowth fixation.
Various blade widths and profiles allow great flexibility to follow the implant contours.
Modular handle is made of high impact surgical stainless steel and has a quick-coupling positive locking mechanism for ease of use and quick blade changes.
Slap hammer threads into the handle and is designed to facilitate blade removal.
System includes choice of handle style.
Product No’s:
S0011-00 [Set with Quick-Coupling Handle and Case]
S0012-00 [Set with Locking Nut Handle and Case]
Individual Instruments Included in Sets:
S1002 Thin Osteotome Blade
2.5" (6,3 cm) x 8 mm
S1003 Thin Osteotome Blade
2.5" (6,3 cm) x 10 mm
S1004 Thin Osteotome Blade
2.5" (6,3 cm) x 12 mm
S1005 Thin Osteotome Blade
2.5" (6,3 cm) x 20 mm
S1006 Curved Thin Osteotome Blade
2.5" (6,3 cm) x 12 mm
S1007 Curved Thin Osteotome Blade
5" (12,7 cm) x 20 mm
S1008 Thin Osteotome Blade
5" (12,7 cm) x 10 mm
S1009 Thin Osteotome Blade
5" (12,7 cm) x 8 mm
S1020 Handle with Quick-Coupling End
5" (12,7 cm)
– OR –
S1021 Handle with Locking Nut
6" (15,2 cm)
S1133 Radial Osteotome
5" (12,7 cm) x 10 mm
S1120 Radial Osteotome
5" (12,7 cm) x 12 mm
S1134 Radial Osteotome
5" (12,7 cm) x 14 mm
S1121 Radial Osteotome
5" (12,7 cm) x 16 mm
S1122 Radial Osteotome
5" (12,7 cm) x 20 mm
S2007 Small Slap Hammer
12" (30,5 cm)
9018 Case
|
|
|
Optional Blades for Flexible Osteotome System
|
|
|
|
Optional Strike Plate can be attached to the Handle for direct striking with a mallet.
Optional Curved Chisel Blades are designed to help loosen the cement/prosthesis interval in TKA tibial tray and femoral component revisions. The curved design is useful in working around pegs & fins to get posterior cement access. Also helpful with removal of other implants, i.e shoulder, ankle, etc.
OPTIONAL BLADES:
NOT INCLUDED IN SET
S1020-SP Strike Plate for Handle
Diameter 1.625" (4,1 cm)
S1123 7.5" Extra Long Osteotome Blade
7.5" (19,1 cm) x 8 mm
S1135 Radial Osteotome Medial Curve
6.75" (17,1 cm) x 11 mm
S1136 Radial Osteotome Lateral Curve
6.75" (17,1 cm) x 11 mm
S1137 Radial Osteotome Medial Curve
5" (12,7 cm) x 11 mm
S1138 Radial Osteotome Lateral Curve
5" (12,7 cm) x 11 mm
S1233-L 2" Flexible Left Curved Chisel
2" (5,1 cm) x 8 mm
S1233-R 2" Flexible Right Curved Chisel
2" (5,1 cm) x 8 mm
S1222 2.5" Chisel Blade
2.5" (6,4 cm) x 8 mm
S1223 2.5" Chisel Blade
2.5" (6,4 cm) x 10 mm
S1224 2.5" Chisel Blade
2.5" (6,4 cm) x 12 mm
S1225 2.5" Chisel Blade
2.5" (6,4 cm) x 20 mm
S1229 5" Chisel Blade
5" (12,7 cm) x 8 mm
S1228 5" Chisel Blade
5" (12,7 cm) x 10 mm
S1231 5" Chisel Blade
5" (12,7 cm) x 12 mm
S1230 5" Chisel Blade
5" (12,7 cm) x 20 mm
S1227 5.5" Long Chisel Blade
5.5" (12,7 cm) x 8 mm
S1232 7.5" Extra Long Chisel Blade
7.5" (19,1 cm) x 8 mm
S1234 8.5" Extra Long Chisel Blade
8.5" (21,6 cm) x 8 mm
S1235 9.5" Extra Long Chisel Blade
9.5" (24,1 cm) x 8 mm
S1236 10.5" Extra Long Chisel Blade
10.5" (26,7 cm) x 8 mm
S1237 11.5" Extra Long Chisel Blade
11.5" (29,2 cm) x 8 mm
S1238 12.5" Extra Long Chisel Blade
12.5" (31,8 cm) x 8 mm
|
|
|
Freeman Forceps
Designed to help with hand pain, fatigue, and hand arthritis
|
|
|
|
Designed by Carl R. Freeman, MD
|
|
|
|
|
Allows surgeons to utilize a forceps or pickup type instrument using a more mechanically and ergonomically favorable grip. Forceps can be used with a full-hand grip or “palmed.”
Product No: 1174
Overall Length: 6.875" (17,5 cm)
|
|
|
Gelpi Retractors |
|
|
|
|
|
|
|
Product No’s:
4180 [Standard]
Overall Length: 7.75" (19,7 cm)
4181 [With Ergonomic Handle]
Overall Length: 8.75" (22,2 cm)
|
|
|
Gray Syringe Assist with Ergonomic Handle
For use in the O.R or the office, the design helps to prevent hand fatigue and pain when injecting with a 20mL syringe over multiple cases |
|
|
|
Designed by Robert Gray, MD |
|
|
|
Sterilizable for O.R use, such as injecting the posterior capsule during TKA.
Especially useful for injecting preoperative local anesthesia for WALANT surgery.
Uses finger flexors to generate more force over more surface area than only the thumb flexor.
Ratchet mechanism ensures maximal grip force generation throughout entire injection.
Syringe not included.
Product No: 8988
Overall Length – Closed: 5.25" (13,3 cm)
Overall Length – Open: 7.5" (19,1 cm)
Height: 5" (12,7 cm)
Syring Diameter: 21 mm
Patent Pending
|
|
|
Hannum Graspers
Teeth in jaw firmly holds bone and tissue |
|
|
|
Designed by Scott Hannum, MD |
|
|
 |
Non-locking design can be easily gripped while allowing greater pressure to be applied.
Used for dissection(to preserve)/or removal of the anterior capsule, removal of the labrum, or other soft tissue around the acetabulum prior to cup implantation. Also used to release the capsule to expose the femur for placement of the femoral stem. Long, low profile helps facilitate working through a small incision without disrupting vision.
Available in three jaw sizes: short jaw for holding bone, medium jaw for smaller bones, and long jaw for tissue.
Product No's:
1775-01 [Short Jaw]
Overall Length: 9.25" (23,5 cm)
Jaw Width:
8 mm
1775-02 [Medium Jaw]
Overall Length: 9.25" (23,5 cm)
Jaw Width:
5 mm
1775-03 [Long Jaw]
Overall Length: 9.25" (23,5 cm)
Jaw Width:
3 mm
|
|
|
Hendren Self-Retaining Retractor
Gentle on tissue, effectively holds back subcutaneous fat, and can be useful for retracting the deltoid muscle firmly |
|
|
|
Designed by D.H. Hendren, MD |
|
|
 |
Product No: 1750
Overall Length:
6.5" (16,5 cm)
Blade Size: 22 x 14 mm
|
|
|
Incision Aligner
Designed to align an incision during closing |
|
|
|
Designed by DMP |
|
|
 |
The bent ends of the aligner are placed at each end of an incision, which is aligned by pulling outward on each end. The sliding end will lock in place when it is tensioned. Pressing inward slightly on the sliding end will allow the aligner to be collapsed and removed.
Product No: 1330
Overall Length: 14" (35,6 cm)
Blade Offset: 45 mm
|
|
|
Jones Mallet
Unique hand fitting shape provides superior gripping strength
|
|
|
|
Designed by Dickie Jones, MD
|
|
|
|
|
This striking instrument has a unique hand fitting shape that provides superior gripping strength for accurate light to heavy impaction.
Product No: 7825 [2.4 lbs (1,09 kg)]
Overall Length: 8.25" (21 cm)
Head Width: 3" (7,6 cm)
Head Diameter: 1.5" (3,8 cm
|
|
|
K-Wire Bender/Cutter
Designed to bend a K-wire while extending from bone without applying mechanical strain
|
|
|
|
|
|
|
|
Can bend and cut K-wires measuring
1 to 1.6mm (.039" to .062") in diameter.
The K-wire only needs to extend 20mm from the skin surface to be bent.
Product No: 2111
Overall Length: 6.625" (16,5 cm)
|
| |
|
Kopplin Pain Catheter Insertion Grasper
Designed to help speed workflow with surgeon placement of an adductor pain catheter, the spaced, parallel, flat jaws help allow for secure, atraumatic grasping of the fine catheter tip |
|
|
|
Designed by Matthew Kopplin, MD |
|
|
|
Markings every 3 cm on shaft with a bold line at 12 cm for depth determination.
Product No: 1783
Overall Length: 11.2" (28,5 cm)
Shaft Length: 8.25" (21 cm)
|
|
|
Large T-Handle Fixed Drivers
Large easy grip soft silicone handled drivers help provide a sturdy non-slip grip
|
|
|
|
|
|
|
|
The two standard Quick-connect models release by pulling the collar backward, while the Reverse Quick-connect model is designed to have the collar be pushed forward for release.
Product No's:
8248 [Zimmer Hall Quick-connect]
Overall Length: 5.75" (15,6 cm)
Handle Width: 4.625" (11,6 cm)
8248-01 [Reverse Quick-connect Zimmer Hall]
Overall Length: 5.75" (15,6 cm)
Handle Width: 4.625" (11,6 cm)
8249 [Hudson Quick-connect]
Overall Length: 5.75" (15,6 cm)
Handle Width: 4.625" (11,6 cm)
|
|
|
Light Wands – Short and Small Diameter
Short wand useful for proximal illumination, while thin diameter wands help illuminate deep cavities such as the femoral shaft |
|
|
|
Designed by Anthony Unger, MD |
|
|
|
Light wands can be attached to a fiber optic light cable with ACMI (female) connector.
Product No's:
8011-01 [Short Light Wand]
Wand Length: 3" (7,6 cm)
Wand Shaft Diameter: 4.6 mm
8011-02 [Short Thin Light Wand]
Wand Length: 5.5" (14 cm)
Wand Shaft Diameter: 3.2 mm
8011-03 [Long Thin Light Wand]
Wand Length: 11" (28 cm)
Wand Shaft Diameter: 3.2 mm
Light Source Cable Adapters
Product No's:
8009-S ACMI to Storz Adapter
8009-W ACMI to Wolf Adapter |
|
|
Lighted Yankaur Suction Device
Designed to help provide effective suction with the addition of a light source for enhanced visualization |
|
|
|
Designed by Adolph V. Lombardi Jr., MD |
|
|
|
Can be attached to a fiber optic light cable with ACMI (female) connector.
The handle is made of Delrin.
Entire device is steam sterilizable.
Product No's:
8016-L [Yankaur Suction Device]
Overall Length: 11.75" (29,8 cm)
Handle Length: 3.93" (10 cm)
Handle Width: .86" (2,2 cm)
Suction Tube Diameter: .25" (6,35 mm)
Light Source Cable Adapters
Product No's:
8009-S ACMI to Storz Adapter
8009-W ACMI to Wolf Adapter
|
|
|
Long Bonney Tissue Forceps
Extra length—3" (7,6 cm) more than standard—allows for use in deep wound areas |
|
|
|
|
|
|
 |
Product No: 5040
Overall Length: 10" (25,4 cm)
|
|
|
Long Jaw Needle Nose Pliers
|
|
|
|
|
|
|
|
Product No: 1833
Overall Length: 7" (17,8 cm)
Jaw Length: 2.25" (5,7 cm)
Jaw Width Tapered from: 8 mm to 1.5 mm
Jaw Height Tapered from: 12 mm to 2.5 mm
|
|
|
Mazzara Rongeur with Pistol Grip Handle
Pistol Grip handle lessens hand fatigue and slippage, and allows for better visualization |
|
|
|
Designed by James T. Mazzara, MD |
|
|
 |
Available in three jaw bite sizes.
Product No’s:
1765-01
Jaw Bite: 5 x 14 mm
Overall Length: 10" (25,4 cm)
1765-02
Jaw Bite: 7 x 16mm
Overall Length: 10" (25,4 cm)
1765-03
Jaw Bite: 10 x 16mm
Overall Length: 10" (25,4 cm)
|
|
|
Mengato Depth Gauge
Ring-handled design with 3 rings gives 3-point grip for ease of holding and manipulation |
|
|
|
Designed by Richard Mengato, MD |
|
|
|
Allows for superior gauge control and manipulation, to advance, engage and maintain the hook on the distal cortex by levering the probe against the bone hole and keeping gentle tension on the hook.
Product No: 1139
Overall Length – Contracted: 7.125" (18,1 cm)
Overall Length – Extended: 9.125" (23,2 cm)
Gauge: 0 to 50 mm
US Patent # 8,512,349
|
|
|
Meyerding Type Retractors with Ergonomic Handle
Designed for general use soft tissue retraction, the ergonomic handle allows for a better grip and less fatigue |
|
|
|
|
|
|
|
Non-glare finish featured on the metal retractor parts.
Product No’s:
6241 [50 x 16 mm]
Overall Length: 8.875" (22,5 cm)
Blade Width: 16 mm
Blade Depth: 50 mm
6242 [75 x 15 mm]
Overall Length: 9" (22,9 cm)
Blade Width: 15 mm
Blade Depth: 75 mm
6243 [75 x 25 mm]
Overall Length: 9" (22,9 cm)
Blade Width: 25 mm
Blade Depth: 75 mm
|
|
|
Mini Lexer Gouges
Can be used to help remove bone from around screw heads or broken screws |
|
|
|
|
|
|
|
Product No’s:
2022-02 [Mini Lexer Gouge – 4 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 4 mm
2022-03 [Mini Lexer Gouge – 6 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 6 mm
2022-04 [Mini Lexer Gouge – 10 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 10 mm
|
|
|
Mini-lexer Osteotomes
Helpful in osteophyte and cement removal |
|
|
|
|
|
|
|
Small, thin osteotomes helpful in osteophyte and cement removal in total joint surgery. Larger handle helps with better control.
Product No’s:
5270-01 [4mm Wide]
Blade Width: 4 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
5270-02 [6mm Wide]
Blade Width: 6 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
5270-03 [10mm Wide]
Blade Width: 10 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
5270-04 [12mm Wide]
Blade Width: 12 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
|
|
|
Modified Rongeur with Pistol Grip Handle
Tapered, narrow jaw and a pistol grip that lessens hand fatigue and slippage, and allows for better visualization |
|
|
|
Design modification by Morteza Meftah, MD and Ira Kirschenbaum, MD, of an original design by James T. Mazzara, MD. |
|
|
|
Product No: 1765
Jaw Bite Length: 18 mm
Jaw Bite Width: Tapered from 7 to 4.5 mm
Overall Length: 10" (25,4 cm)
|
|
|
Modular Impactor Set
Makes multiple impactor heads easily visible and available |
|
|
|
|
|
|
 |
Designed to have available to the operating surgeon multiple types of impactors utilizing one handle. The rack uses less space and allows the surgeon to quickly see the designs available. The impactors are supplied with stainless steel tips for bone and delrin tips which can be used against an implant for slight placement adjustments.
Product No's:
5370 [Complete Set]
Included In Set / Also Available Individually:
5370-01 [Rectangular Impactor Steel Tip 11 mm x 4 mm]
5370-02 [Oval Impactor Steel Tip 13 mm x 8 mm]
5370-03 [Crescent Impactor Steel Tip 12 mm x 5 mm]
5370-04 [Square Impactor Steel Tip 9 mm x 9 mm]
5370-05 [Round Impactor Steel Tip 15 mm]
5370-06 [Round Impactor Steel Tip 12 mm]
5370-07 [Round Impactor Steel Tip 9 mm]
5370-19 [Impactor Set Base]
Base Diameter: 3.5" (8,9 cm)
5370-D1 [Rectangular Impactor Delrin Tip 11 mm 4 mm]
5370-D2 [Oval Impactor Delrin Tip 13 mm x 8 mm]
5370-D3 [Crescent Impactor Delrin Tip 12 mm x 5 mm]
5370-H [Modular Impactor Handle]
Overall Handle Length: 8" (20,3 cm)
Grip Length: 4.5" (11,4 cm)
|
|
|
Modular Weights
Help to free assisting personnel by helping to hold retractors in place
|
|
|
|
|
|
|
|
|
Designed to hook onto a retractor handle, which helps the retractor stay in place by the weights attached rather than being held. The desired weight can be adjusted by attaching additional weights to the primary weight which has the attaching hook.
Product No’s:
3430-01
Weight: 1.5 lbs. (.68 kg)
3430-02
Weight: 2.0 lbs. (.91 kg)
3430-03
Weight:
2.5 lbs. (1.13 kg) with attaching hook
|
|
|
Ortho Impactors
|
|
|
|
|
|
|
|
Product No's:
5331 [11 x 4 mm Rectangle]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
5332 [12 x 7 mm Rectangle]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
5333 [12 mm Tapered]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
5334 [9 mm Square]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
5335 [15 mm Round]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
5336 [12 mm Round]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
5337 [9 mm Round]
Overall Length: 9" (22,9 cm)
Shaft Diameter: 9 mm
|
|
|
Ortho Mallets
Larger diameter handle for better grip, and longer |
|
|
|
|
|
|
|
Product No's:
7811 [Standard with Flat Sides]
Overall Length: 7.75" (19,7 cm)
Handle Length: 4.812 (12,2 cm)
Head Diameter: 1.5" (3,8 cm)
Head Weight: 2.25 lb. (1.02 kg)
7812 [Standard]
Overall Length: 7.75" (19,7 cm)
Handle Length: 4.812 (12,2 cm)
Head Diameter: 1.5" (3,8 cm)
Head Weight: 2.5 lb. (1.13 kg)
|
|
|
Ortho Mallets with Easy Grip Handles
Designed to exert force on osteotomes, chisels, gouges and other instruments
|
|
|
|
Cloward-style designed by J. Stiehl, MD
|
|
|
|
|
These solid stainless steel mallets
each have a comfortable 4-1/2" grip
made of a textured silicone that helps
prevent the surgeon’s gloved hand from
slipping and helps maintain a solid grip.
Product No's:
7810 [Small]
Overall Length: 8" (20,3 cm)
Handle Length: 4.5" (11,4 cm)
Head Weight: 1 lb. (.45 kg)
Head Diameter: 1.3125" (3,3 cm)
7815 [Large]
Overall Length: 8" (20,3 cm)
Handle Length: 4.5" (11,4 cm)
Head Weight: 1.75 lb. (.8 kg)
Head Diameter: 1.5" (3,8 cm)
|
|
|
Ortho Mini Chisels
Mini orthopedic chisels, straight and offset, with straight and ergonomic handles |
|
|
|
|
|
|
|
Product No’s:
Offset Chisels
1169-1 [1 mm Offset Chisel]
Overall Length: 6.25" (15,9 cm)
Chisel Width: 1 mm
1169-2 [2 mm Offset Chisel]
Overall Length: 6.25" (15,9 cm)
Chisel Width: 2 mm
1169-3 [3 mm Offset Chisel]
Overall Length: 6.25" (15,9 cm)
Chisel Width: 3 mm
1169-4 [4 mm Offset Chisel]
Overall Length: 6.25" (15,9 cm)
Chisel Width: 4 mm
1169-5 [5 mm Offset Chisel]
Overall Length: 6.25" (15,9 cm)
Chisel Width: 5 mm
Straight Chisels
1170-3 [3 mm Straight Chisel]
Overall Length: 6.4" (16,3 cm)
Chisel Width: 3 mm
1170-4 [4 mm Straight Chisel]
Overall Length: 6.4" (16,3 cm)
Gouge Width: 4 mm
1170-5 [5 mm Straight Chisel]
Overall Length: 6.4" (16,3 cm)
Gouge Width: 5 mm
|
|
|
Ortho Mini Gouges
Mini orthopedic gouges with ergonomic handles, designed for bone resection in small areas and resection of periosteum |
|
|
|
|
|
|
 5 mm Gouge Shown
|
Product No’s:
1168-2 [2 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width: 2 mm
1168-3 [3 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width: 3 mm
1168-4 [4 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width:4 mm
1168-5 [5 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width: 5 mm
1168-6 [6 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width: 6 mm
1168-7 [7 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width: 7 mm
1168-8 [8 mm Gouge]
Overall Length: 5.75" (14,6 cm)
Gouge Width: 8 mm
|
|
|
Ortho Suction Tube
Very effective for suction and minor retracting
|
|
|
|
Designed by T. Eickmann, MD
|
|
|
|
|
Helps eliminate plugging due to bone, cement fragments, blood clots, etc.
Product No: 5465
Overall Length: 9.25" (23,5 cm)
End Hole Diameter: 1 mm
Side Hole Diameter: 1.5 mm
|
|
|
OrthoVise – Large |
|
|
|
U.S. Patent #D398,208 |
|
|
 |
Side Attachment Bolts
Allow a Large OrthoVise™ Slap Hammer (#3950) to be attached to the side of the device.
Available on Standard Large and Long Nose Large OrthoVise™ with Attachment Bolts only.
(Cannot be added on later.) |
|
Made of stainless steel
Models equipped with attachment bolts allow a slap hammer to be attached to the end, as well as to either side of the large OrthoVise™ (except Bent Jaw models), for greater adaptability
Bent Jaw models are not available with side attachment bolts, but have an end attachment nut to accept a Standard Slap Hammer (#3925)
Slap Hammers are designed with a hammer plate for the additional use of a mallet if desired
Product No’s:
STANDARD LARGE
3980 [Large]
Overall Length: 10" (25,4 cm)
with Attachment Bolts (two sides and end)
with Large OrthoVise™ Slap Hammer (#3950)
3980-01 [Large]
Overall Length: 10" (25,4 cm)
with Attachment Bolts (wtwo sides and end)
without Slap Hammer
3981 [Large]
Overall Length: 10" (25,4 cm)
without Attachment Bolts
without Slap Hammer
with End Attachment Nut that accepts a
Standard Slap Hammer (#3925)
LONG NOSE LARGE
3965 [Large]
OrthoVise™ Length: 12" (30,5 cm)
with Attachment Bolts
with Large OrthoVise™ Slap Hammer (#3950)
3965-01 [Large]
OrthoVise™ Length: 12" (30,5 cm)
with Attachment Bolts
without Slap Hammer
LONG NOSE LARGE BENT JAW
3966 [Large Bent Jaw]
OrthoVise™ Length: 11.5" (29,2 cm)
with Attachment Nut {end)
with Standard Slap Hammer (#3925)
3966-01 [Large Bent Jaw]
OrthoVise™ Length: 11.5" (29,2 cm)
without Slap Hammer
with Attachment Nut (end) that accepts a
Standard Slap Hammer (#3925)
SLAP HAMMERS FOR LARGE ORTHOVISE
3950 [Slap Hammer for Large OrthoVise]
For use with 3965's, 3980's, 3981
Overall Length: 16.5" (41,9 cm)
3925 [Standard Slap Hammer with 16" Rod]
For use with: 3966's
Overall Length: 16" (40,7 cm)
THREADED ADAPTERS FOR LARGE ORTHOVISE
3980-02 [Small Adapter]
Changes Male End of a Slap Hammer to Female.
Allows a Standard Slap Hammer (#3925) to be used with any Large OrthoVise™ with Attachment Bolts.
3980-03 [Threaded Adapting Screw – Large]
For use with 3965's, 3966's, 3980's, 3981.
Can be used to append the Large OrthoVise™ with an Attachment Bolt for use with a Large OrthoVise™ Slap Hammer (#3950)
|
|
|
OrthoVise – Small |
|
|
|
U.S. Patent #D398,208 |
|
|
|
Made of stainless steel
Models equipped with attachment bolts allow a slap hammer to be attached to the end of the OrthoVise™ for greater adaptability
Slap Hammer is designed with a hammer plate for the additional use of a mallet if desired
Product No’s:
STANDARD SMALL
3985 [Small]
OrthoVise™ Length: 8" (20,3 cm)
without Attachment Bolt
without Slap Hammer
3985-01 [Small]
OrthoVise™ Length: 8" (20,3 cm)
with Attachment Bolt (end)
with Small OrthoVise™ Slap Hammer (#3955)
3985-T [Small]
OrthoVise™ Length: 8" (20,3 cm)
with Attachment Bolt (endf)
without Slap Hammer
LONG NOSE SMALL
3975 [Small]
OrthoVise™ Length: 9.5" (24,1 cm)
without Attachment Bolt
without Slap Hammer
3975-01 [Small]
OrthoVise™ Length: 9.5" (24,1 cm)
with Attachment Bolt (end)
with Small OrthoVise™ Slap Hammer (#3955)
3975-T [Small]
Overall Length: 9.5" (24,1 cm)
with Attachment Bolt (end)
without Slap Hammer
SLAP HAMMER FOR SMALL ORTHOVISE
3955 [Slap Hammer for Small OrthoVise]
For use with: 3975's, 3985's
THREADED ADAPTER FOR SMALL ORTHOVISE
3985-03 [Threaded Adapting Screw – Small]
For use with: 3975's, 3985's
Can be used to append a Small OrthoVise™ with an Attachment Bolt for use with a Small OrthoVise™ Slap Hammer (#3955)
|
|
|
Periosteal Elevator
Designed for better control
|
|
|
|
|
|
|
|
|
Designed with sharper sides for ease of elevating and stripping. The handle is designed for better control.
Product No’s:
3450 [Angled Shaft with Straight Blade End]
Overall Length: 7.75" (19,7 cm)
Handle Length: 4.5" (11,4 cm)
Blade Size: 19 x 14 mm
3455 [Straight Shaft with Rounded Blade End]
Overall Length: 7.5" (19,1 cm)
Handle Length: 4.5" (11,4 cm)
Blade Size: 16 x 13 mm
|
|
|
Pin Puller – Small
Small size allows for use in a small incision to help with removal of a 2 mm or smaller k-wire pin |
|
|
|
|
|
|
|
Product No: 3033
Overall Length: 6.5" (16,5 cm)
Jaw Width: 6,2 mm tapering to 3 mm at end
Jaw Height: 11,7 mm
|
|
|
Rake Retractors with Ergonomic Handle
Designed for general use soft tissue retraction, the ergonomic handle allows for a better grip and less fatigue |
|
|
|
|
|
|
 |
Non-glare finish featured on the metal retractor parts.
Product No's:
4839 [3-Prong]
Overall Length: 9.5" (24,1 cm)
Rake Width: 13 mm
Rake Depth: 14 mm
4840 [4-Prong]
Overall Length: 9.5" (24,1 cm)
Rake Width: 19 mm
Rake Depth: 14 mm
|
|
|
Replacement Modular Handle for Dscontinued
Infero-Posterior Acetabular Retractors |
|
|
|
|
|
|
|
Product No: C1006 [Modular Handle]
Overall Length: 4.875" (12,4 cm)
Handle Length: 4.5" (11,4 cm)
|
| |
|
Retractor Clip for Smoke Evacuation Tube
Repositionable stainless steel fastener designed to clip onto a retractor to help control the location of a smoke evacuation tube |
|
|
|
Designed by James Saucedo, MD |
|
|
|
Allows for use on a 1/8" thick material with allowance for a “spring” fit.
Product No: 5466
Dimensions: 27 mm Long x 18 mm Wide x 16 mm Deep
|
|
|
Reusable Light Wand
Light wand designed for illumination of deep incisions |
|
|
|
|
|
|
|
Can be attached to a fiber optic light cable with ACMI (female) connector.
Product No: 8010-02
Overall Length: 13.5" (34,3 cm)
Handle Length: 5.55" (13,3 cm)
Bend Angle: 45°
|
|
|
Ring Curettes
|
|
|
|
|
|
|
|
Product No's:
5150 [Straight, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.75" (22,2 cm)
5152 [Straight, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.75" (22,2 cm)
5154 [Straight, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.75" (22,2 cm)
5156 [Bent, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.5" (21,9 cm)
5157 [Bent, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.5" (21,9 cm)
5158 [Bent, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.5" (21,9 cm)
|
|
|
Roberts Pin Bending Cannula Set
Designed to help bend the end of a flexible intramedullary pin, which has been cut flush to the bone, for better grasping during pin removal |
|
|
|
Designed by David Roberts, MD |
|
|
|
Helpful when removing a pin which has been cut flush to the bone which can be hard to grasp with standard tools.
After exposing the pin end, the cannula helps bend the pin for better access for the removal instrument while maintaining a small incision.
Features
-
Beveled edge that allows easy capture of end of pin
-
Cannula can be used as a trephine for pins with bony overgrowth
-
Reusable - thick walls withstand repeated uses
Benefits
-
Makes removal of intramedullary pins simple, quick and easy
-
Allows pins to be left flush to bone at insertion and avoid pain from prominent pins
-
Shortens surgical time for pin removal using existing small incisions
Advantages
-
No need to pre-bend or leave pins overly prominent
-
No need to make incision larger during removal
-
No need for chisels or osteotomes to remove bone overgrowth
Product No’s:
2113-00 [Set of 3 Sizes]
Set Includes / Available Individually:
2113-01 [2 mm]
For 1.5 - 2.0 mm flexible nails
Overall Length: 5.5" (14 cm)
2113-02 [3 mm]
For 2.5 - 3.0 mm flexible nails
Overall Length: 5.5" (14 cm)
2113-03 [4 mm]
For 3.5 - 4.0 mm flexible nails
Overall Length: 5.5" (14 cm)
|
|
|
Rose Hamstring Tendon Harvester
Designed to easily convert from an open to a closed device without sharp edges to facilitate safe harvesting of hamstring tendon autografts
|
|
|
|
Designed by Donald J. Rose, M.D., FACS, FAAOS |
|
|
|
Product No: 4692
Overall Length: 15" (38,1 cm)
Shaft Length: 9.5" (24,1 cm)
Internal Diameter 5.5 mm
External Diameter: 8 mm
|
|
|
Sarraf TiN Coated Cement Removal Forceps
TiN coating helps reduce metal transfer and protects the prosthetic implant surface when in contact |
|
|
|
Designed by Khaled M. Sarraf, MD |
|
|
|
Aids with the removal of excess extruded cement during joint arthroplasty, and can be used in conjunction with any Innomed TiN coated instrument.
Ultra hard titanium nitride coating helps to extend forceps life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion, while helping to eliminate metal transfer and protect the implant surface.
Product No's:
5039 [Straight]
Overall Length: 6" (15,2 cm)
5041 [Angled]
Overall Length: 6.125" (15,6 cm)
|
|
|
Screw Removal Pliers
Jaw designed to grasp onto a screw or screw head to help in removal |
|
|
|
|
|
|
|
Product No: 2020
Overall Length: 8" (20,3 cm)
|
|
|
Screw Removal Pliers
Designed to solidly grip and clamp onto a screw head, broken screw, or pin for removal |
|
|
|
|
|
|
|
Product No: 2022-01
Overall Length: 8" (20,3 cm)
|
|
|
Seachris Delrin Cement Scraper
Reusable delrin scraper is designed to help remove cement around a knee or hip prosthesis |
|
|
|
Designed by Timothy Seachris |
|
|
|
Product No: 5218
Overall Length: 5" (12,7 cm)
Thickness: 1/8" (3.1 mm)
|
|
|
Shark Tooth Graspers
Graspers sharp teeth help grasp onto tissue and bone |
|
|
|
Designed by Luis Ulloa |
|
|
|
Helpful in removing the labrum, and osteophytes around the acetabulum and around the glenoid. Also helps to remove meniscus, osteophytes and loose bodies. Helps facilitate working through a small incision without disrupting vision.
Product No’s:
STANDARD HANDLE
1797 [5" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 8" (20,3 cm)
Shaft Length: 5" (12,7 cm)
1798 [7" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
1799 [9" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
1796 [12" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 15" (38,1 cm)
Shaft Length: 12" (30,5 cm)
SMALL GRIP HANDLE
Small Grip Handle designed with the grip closer together for easier gripping and to help reduce hand fatigue.
1798-SG [7" Shaft with Small Grip Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
1799-SG [9" Shaft with Small Grip Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
|
|
|
Soft Impact Mallets with Easy Grip Handles
Provides shock absorbing force
|
|
|
|
|
|
|
|
Designed to have a shock-absorbing force, providing less bounce or wasted force. The mallet is filled with a shock-absorbing media and has a flat striking surface to keep the mallet centered on an instrument.
The comfortable Easy Grip handle is made of a textured silicone that helps prevent the surgeon’s gloved hand from slipping and helps maintain a solid grip. The bottom can also be used to tap an implant in place.
The mallet with delrin head features a replaceable delrin head.
Product No’s.:
7820 [2 lbs. / .907 kg]
Overall Length: 10.5" (26,7 cm)
Handle Length: 5" (12,7 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.375" (3,5 cm)
7832 [2 lbs. / .907 kg with Replaceable Delrin Head]
Overall Length: 10.5" (26,7 cm)
Handle Length: 5" (12,7 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.375" (3,5 cm)
7837 [3 lbs. / 1,36 kg]
Overall Length: 11" (27,9 cm)
Handle Length: 5" (12,7 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.875" (4,8 cm)
Delrin Head Replacements for 7832:
7832-HEAD01 [.5" Stud] Single
7832-HEAD02 [.5" Stud] 3-Pack
7832-HEAD03 [.875" Stud] Single
7832-HEAD04 [.875" Stud] 3-Pack
 |
|
|
Soft Impact Mallet with Weidman Silicone Handle |
|
|
|
Handle designed by Kevin Weidman, MD |
|
|
|
Product No: 7821 [2 lbs. (.907 kg)]
Overall Length: 10.625" (27cm)
Grip Length: 5.5" (14cm)
Head Width: 3.5" (8,9cm)
Head Diameter: 1.375" (3,5cm)
|
|
|
Soudry Loose Body Grasper
Designed to help with the removal of soft tissue loose bodies in arthroscopy and open procedures |
|
|
|
Designed by Michael Soudry, MD |
|
|
|
Product No: 1769
Overall Length: 9" (22,9 cm)
Shaft Length: 6" (15,2 cm)
|
|
|
Stanton Needle Driver
Allows a heavy cutting needle such as an OS-6 to be pushed through cancellous bone when re-attaching muscle or tendon |
|
|
|
Designed by John L. Stanton, MD, FACS |
|
|
|
The groove captures the outer (convex) side of the needle and prevents the needle from spinning even when applying significant pressure. Useful for reattaching the rotator cuff in rotator cuff repairs, as well as in attaching suture anchors.
Product No: 3042
Overall Length: 6.75 (17,1 cm)
Jaw Width: .25" (6,3 mm)
|
|
|
Star Bit Driver Set |
|
|
|
|
|
|
|
Set consists of four star bits — T10, T15, T20, & T25, a handle which accommodates any of the above bits, and a sterilization case. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
The ergonomic, modular handle has two connection points, allowing for both straight and T-handle orientations.
Product No's:
5194-00 [4 Star Bits w/Handle & Case]
5194-01 [4 Star Bits w/Case only]
Also Available individually:
S0113 [Universal 4" (10,1 cm) Handle]
5194-10 [T10 with A/O End]
5194-15 [T15 with A/O End]
5194-20 [T20 with A/O End]
5194-25 [T25 with A/O End]
9003 [Case]
|
|
|
Straight Suture Passer
Designed to help pass suture through bone |
|
|
|
Designed by Brian T. Maurer, MD |
|
|
|
Product No: 1111
Overall Length: 8.125" (20,6 cm)
Handle Length: 4.25" (10,8 cm)
Shaft Diameter: 2,5 mm
|
|
|
Surgical Spoon
Very useful for the application of methylmethacrylate bone graft |
|
|
|
Designed by David Scott, MD |
|
|
|
Made from surgical grade stainless steel (for sterilization purposes).
Product No: 8209
Overall Length: 5.875" (14,9 cm)
|
|
|
Sweed Dissecting Scissors
Designed with a blunt, flat bar fixed to the lower limb, the scissors also act as a dissector to protect underlying vital structures |
|
|
|
Designed by Tamer Sweed, FRCS (Orth) |
|
|
|
Product No: 3081
Overall Length: 6.625" (16,8 cm)
Bottom Pad: 16 mm x 6 mm
Pad Extension Beyond Scissor: 6 mm
|
|
|
Table Clamps
Designed to help clamp and hold a device to the table |
|
|
|
|
|
|
 |
For Use with these
Innomed Positioning Devices:
-
Auerbach Arm Holder Rake Retractor Set
-
Freeman Arm Holder
-
Kirschenbaum Foot Positioners
-
Robb Leg Positioner
-
Thornberry Large Patient Hip Positioner
Product No: 2595 [Table Clamp]
|
| |
|
|
|
|
|
|
|
For Use with these
Innomed Positioning Devices:
Capello Patient Positioner-
Direct Anterior Total Hip
Arthroplasty Leg Positioner
Durham Leg Positioner-
Leg Stabilizer
-
Modified 90° Leg Stabilizer
Product No: 9120 [Table Clamp]
|
|
|
|
|
|
|
|
|
For Use with these
Innomed Positioning Devices:
-
Wixson Anterior Suspension Hook System
Chandran Thigh Lift Positioner
Product No: 9125 [Rotating Table Clamp]
|
|
|
|
|
|
|
|
|
|
|
For Use with these
Innomed Positioning Devices:
-
Wixson Anterior Suspension Hook System
Chandran Thigh Lift Positioner
Product No: 9121 [Clark Sytle Table Clamp]
|
|
|
T-Handle with A0-End |
|
|
|
|
|
|
|
Product No: 2022-T
Overall Length: 5.9" (15 cm)
Handle Width: 3.15" (8 cm)
|
|
|
Tissue Graspers with Shark Teeth
Shark teeth help to grasp on to tissue and bone |
|
|
|
Designed by Luis Ulloa |
|
|
|
Shaft allows for use in narrow spaces.
Ideal for removing herniated disc material.
Product No's:
1784-01 [Up Angled Jaw]
Shaft Length: 7" (17,8 cm)
Overall Length: 10" (25,4 cm)
Jaw: 9 mm Long x 5 mm High x 1.8 mm Wide
1784-02 [Straight Jaw]
Shaft Length: 7" (17,8 cm)
Overall Length: 10" (25,4 cm)
Jaw: 9 mm Long x 5 mm High x 1.8 mm Wide
1784-03 [Down Angled Jaw]
Shaft Length: 7" (17,8 cm)
Overall Length: 10" (25,4 cm)
Jaw: 9 mm Long x 5 mm High x 1.8 mm Wide
|
|
|
Torx/Hex Adapter Set
Designed for conversion of a 3.5 mm screwdriver |
|
|
|
Designed by Stephen M. Walsh, MD |
|
|
|
Especially helpful when an articulated, universal joint driver is needed (i.e. acetabular screws)
Product No's
8003-00 [Set – One Each]
Set Includes/Available Separately:
8003-01 [Torx Bit to Hex Driver Adapter]
Overall Length: .6" (1,54 cm)
8003-02 [Hex Bit to Torx Driver Adapter]
Overall Length: .6" (1,54 cm)
|
|
|
Universal Bone Grafting/Impacting Forceps
Bone graft can be grasped, placed and impacted without changing hands or instruments |
|
|
|
Designed by J.A. Amis, MD |
|
|
The forceps are designed with grasping ends for delivery of bone graft. When the graft is in place, the forceps are closed, which forms the ends into an impacting punch. A striking platform is attached to the end of the forceps for tapping and tamping the graft. Four end diameters are available in two lengths.
|
 Product No’s:
6" (15,2 cm) Length
5010-01 [1/8" (3,2 mm) Diameter End]
5010-02 [3/16" (4,8 mm Diameter End]
5010-03 [1/4" (6,3 mm) Diameter End]
5010-04 [5/16" (8 mm) Diameter End]
10" (25,4 cm) Length
5050-01 [1/8" (3,2 mm) Diameter End]
5050-02 [3/16" (4,8 mm Diameter End]
5050-03 [1/4" (6,3 mm) Diameter End]
5050-04 [5/16" (8 mm) Diameter End]
|
|
|
Universal Screwdriver Set
Helps eliminate the opening of multiple sterile packs when a specific size or style of screwdriver is needed
|
|
|
|
|
|
|
|
Helpful during revision total joint surgery where screws have been used, removal of bone plates, fracture fixation screws or bone graft screws. Set consists of: 7 (seven) double ended screwdriver bits — small & large single slot, cross & cruciate, 3.5 mm & 4.5 mm hex, small & large phillips, small, medium, & large star — a handle which accommodates any of the above bits, and a sterilization case.
Product No's: 5195 [Complete Set with Case]
Also available individually:
5195-01 [Handle]
5195-02 [Straight (single slot) – Lg & Sm]
Large: 7 x 1.5 mm, Small: 5 x 1 mm
5195-03 [Cross/Cruciate]
Large: 7 mm, Small: 6 mm
5195-04 [Hex]
Large: 4.5 mm, Small: 3.5 mm
5195-05 [Phillips]
Large: 4 mm, Small: 3.5 mm
5195-08 [Small Star: #6 & #8]
5195-06 [Medium Star: #10 & #15]
5195-07 [Large Star: #20 & #25]
|
|
|
Universal Screw Removal Instrument System
Designed to remove solid and cannulated screws, including partial, broken, stripped, and submerged screws |
|
|
|
|
|
|
 |
Product No’s:
S0010-00 [Complete System with Case]
S0113 [Universal Instrument Handle]
S0128 [1.5 mm Screw Extractor]
S0116 [2.5 mm Screw Extractor]
S0130 [3.5 mm Screw Extractor]
S0117 [1.5 mm Hex Driver]
S0114 [2.5 mm Hex Driver]
S0115 [3.5 mm Hex Driver]
S0132 [4.0 mm Hex Driver]
S0133 [5.0 mm Hex Driver]
S0136 [2.5 mm Cannulated Hex Driver]
S0137 [3.5 mm Cannulated Hex Driver]
S0138 [4.0 mm Cannulated Hex Driver]
S0139 [5.0 mm Cannulated Hex Driver]
S0118 [Large Cruciform Screwdriver]
S0119 [Small Cruciform Screwdriver]
S0141 [Mini Cruciform Screwdriver]
S0120 [Single Slot Screwdriver]
S0121 [2.2 mm Trephine]
S0122 [3.2 mm Trephine]
S0123 [4.2 mm Trephine]
S0124 [4.7 mm Trephine]
S0125 [7.2 mm Trephine]
S0127 [Universal Extractor - Shaft Only]
S0127-01 [Large Extraction Bolt Body]
S0127-03 [Small Extraction Bolt Body]
S0127-04 [Extractor Wrench]
S0129 [Pick]
S0140 [Cannulated Drive Extension]
9017 [Screw Removal Case Only]
Case Dimensions:
21" x 9.5" x 2.25 (53,4 x 24,1 x 5,7 cm) |
|
Used for removal of stripped hex screws, buried screws, and partial screws with broken screw heads. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
Screw Extractors
Unique thread design accommodates removal of stripped screws. The instrument “locks” into the screw head and allows removal once engaged. Designed to be used in a counter-clockwise direction.
Trephines
Designed to fit over submerged screws for extraction with minimal bone loss. Extraction is enhanced by the unique tooth design. Designed to be used in a counter-clockwise direction.
Universal Extractor
Designed to remove screws with heads partially or completely missing. The cone shaped head fully engages the remaining screw and optimizes the force needed for removal. The bolt is disposable and locks into place using a unique thread design. Designed to be used in a counter-clockwise direction.
Hex Drivers
Available in all standard hex sizes. Also offered in a cannulated shaft version for easier removal of buried screws.
Screwdrivers
Standard cruciform screwdrivers in large, small, and mini, and single slot.
Cannulated Drive Extension
Used when a longer instrument shaft is desired.
Pick
Used to remove fragments and bone or tissue from screw head.
Universal Instrument Handle
The single handle allows the surgeon to decide which direction is most efficient and comfortable. The quick-connect release mechanism allows for quick interoperative exchange.
|
|
|
Vaughan Endzone Retractor
Designed for use when placing the end screws while plating a fracture using a minimally invasive technique |
|
|
|
Designed by Roderick Vaughan, MD |
|
|
|
 The “U”-shaped wall design helps allow the maximal exposure along the length, or "endzone", of an incision while maintaining adequate width and retraction along the sides of the exposure.
Product No: 1766
Overall Length: 8.75" (22,2 cm)
Deep Depth: 45 mm
Deep Internal Width: 14 mm
Shallow Depth: 25 mm
Shallow Internal Width: 12 mm
|
|
|
Wagner Osteotome Handle
Handle is designed for easier gripping, rotational control, and use with a mallet with a standard 1/4” Lambotte osteotome |
|
|
|
Designed by Russell Wagner, MD |
|
|
|
Product No's
5348 [Handle Only]
Overall Length: 5.5" (14 cm)
5348-01 [1/4" Osteotome Only]
Overall Length: 8.875" (22,5 cm)
|
|
|
Whelan Flexible Chisel Guide
Designed to help stabilize a thin chisel blade until it's within the bone prosthesis interface |
|
|
|
Designed by Edward J. Whelan, III, MD |
|
|
|
Guide with sliding handle helps to stabilize a curved, thin flexible chisel blade until it's within the bone prosthesis interface. Chisel tip lets it hug prosthesis to help prevent perforation. Slap hammer threads into the handle and is designed to facilitate blade removal. Easily changeable disposable blades help assure sharpness.
Chisel blade features an ultra hard titanium nitride coating to help extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
5302-00 [Complete Set[
Included In Set / Replacement Parts:
5302-01 [Guide Only]
Overall Length: 5" to 8.75" (12,7 to 22,2 cm)
5302-02 [10mm Chisel Blade Only]
Overall Length: 4.625" (11,7 cm)
Blade Thickness: .020" (.51 mm)
3040 [Slap Hammer]
1015 [Sterilization Case]
|
|
|
Whelan Curved Chisel Guide
Designed to help stabilize a thin curved chisel blade
until it's within the bone prosthesis interface |
|
|
|
Designed by Edward J. Whelan, III, MD |
|
|
|
Guide with sliding handle helps to stabilize a curved, thin flexible chisel blade until it's within the bone prosthesis interface. Chisel tip lets it hug prosthesis to help prevent perforation. Slap hammer threads into the handle and is designed to facilitate blade removal. Easily changeable disposable blades help assure sharpness.
Chisel blade features an ultra hard titanium nitride coating to help extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
5302-00 [Complete Set[
Included In Set / Replacement Parts:
5302-01 [Guide Only]
Overall Length: 5" to 8.75" (12,7 cm to 22,2 cm)
5302-02 [10mm Chisel Blade Only]
Overall Length: 4.625" (11,7cm)
Blade Thickness: .020" (.51mm)
3040 [Slap Hammer]
1015 [Sterilization Case]
|
|
|
White Aspiration Handle
Designed for aspiration of cavities or spaces such as joints, bone marrow, and the illiac crest, using a 60 ml syringe |
|
|
|
Designed by Edward White, MD |
|
|
|
Works with a 60 ml syringe only.
Syringe not included.
Product No: 1131
Height: 5" (12,7 cm)
Length: 6.5" (16,5 cm) / Extends to 11" (27,9 cm)
Width at Syring Holder: 1.5" (3,8 cm)
Body Width: .9" (2,3 cm)
|
|
|
Wide Rake Retractors with Ergonomic Handle
Designed for general use soft tissue retraction, the ergonomic handle allows for a better grip and less fatigue |
|
|
|
|
|
|
 |
Sharp and dull teeth available in two depths.
Non-glare finish featured on the metal retractor parts.
Product No's:
6051 [Deep, Sharp]
Overall Length: 11.175 (28,3 cm)
Blade Width: 2.375" (6 cm)
Blade Depth: 2.75" (7 cm)
6052 [Deep, Blunt]
Overall Length: 11.175 (28,3 cm)
Blade Width: 2.375" (6 cm)
Blade Depth: 2.75" (7 cm)
6053 [Shallow, Sharp]
Overall Length: 11.175 (28,3 cm)
Blade Width: 2.375" (6 cm)
Blade Depth: 1.875" (4,8 cm)
6054 [Shallow, Blunt]
Overall Length: 11.175 (28,3 cm)
Blade Width: 2.375" (6 cm)
Blade Depth: 1.875" (4,8 cm)
|
|
|
Wilke Angled Blunt Nose Scissors
Allows blunt dissecting around critical structures (nerves, vessels, etc.) while maintaining a cutting surface for fascia. The tool's blunt ends can also be used for cauterizing and grabbing small vessels. |
|
|
|
Designed by Benjamin K. Wilke, MD |
|
|
|
Product No: 3078
Overall Length: 6" (15,2 cm)
|
|
|
© 2023 Innomed, Inc. All rights reserved.
|
