Click thumbnail image for details
|
|
|
|
|
|
| |
Auerbach Hand Positioner Set
|
Beard Distal Bicep Retractor
|
Beard Distal Radius Wide Hohmann Retractor
|
Burgess Carpal Tunnel Retractor
|
|
|
|
|
|
|
Calibrated Ortho Spreader with Slotted Tips |
NEW! Chandran Distal Biceps Tissue Protector
|
Chung T-Handle Retractors
|
Chung Weitlaner Retractor
|
Desai Clearview Open Blade Self-Retaining Retractor
|
|
|
|
|
|
|
Ditmars Carpal Tunnel Release Set |
Dodson Modular Retractor
|
Faillace Ambidextrous Self-Retaining Retractors
|
Gurbani Joint Distractor/Compressor
|
Hendren Neuroma Retractor
|
|
|
|
|
|
|
|
HFD Compressor/Distractors
|
HFD Self-Retaining Small Bone Spreader
|
Holiday Self-Retaining Carpal Tunnel Retractor
|
J.B. Redler Retractor
|
Joint, Calcaneal, Small Bone Compressors
|
|
|
|
|
|
|
|
|
Joint, Calcaneal, Small Bone Compressor/Distractor
|
Joint, Calcaneal and Small Bone Compressor/Distractors with Speed Lock
|
Joint, Calcaneal and Small Bone Distractors
|
Kakar Carpal Tunnel Retractors
|
Kawell Short Army Navy Retractor
|
|
|
|
|
|
|
Large Pin Distractor and Compressor
|
Lawton Distal Radius Mini Frame & Blade Set
|
NEW! Mantis Screwdriver Distractor
|
NEW! Modified Mini Hohmann Retractors
|
Monaco Small Space Retractor
|
|
|
|
|
|
|
OrthoLucent™ Mini Hohmann Retractors
|
Ortho Self-Retaining Retractor with Pin Guides
|
Slavitt Phalangeal Forceps
|
Stanton Forward Ragnell Retractors
|
Stanton Forward Rake Retractors
|
|
|
|
|
|
|
Stanton Forward Senn Retractors
|
Swanson Elevator
|
Vaughan Distal Bicep Tendon Repair Retractor
|
Weinraub Joint and Calcaneal Spreader
|
Williams Distal Radius Fracture Retractor
|
|
|
|
|
|
|
Wilson Trigger Finger Retractor
|
NEW! Woods Retractor
|
Wurapa Small Joint Compressor and Pin Distractor
|
Wurapa Swivel Blade Forearm Retractor
|
|
|
|
Auerbach Hand Positioner Set
Designed to position and retract the skin for surgical exposures of the hand, wrist and forearm |
|
|
|
Designed by David Auerbach MD |
|
|
 |
Product No’s:
1747-00 [Set]
Also Available Individually:
1747-01 [Hand Plate]
Dimensions: 15" x 7" (38,1 x 17,8 cm)
1747-01 [Hand Tray]
Dimensions: 13.75" x 9.75" (34,9 x 24,8 cm)
1747-03 [Thumb Post]
1747-03-C [Thumb Post Clip]
1747-04 [Cord Clip]
Seven (7) included in Set,
One (1) with this product number.
1747-05 [Retractor]
Four (4) included in Set,
One (1) with this product number.
1747-06 [Wrist Strap Buckle]
Two (2) included in Set,
One (1) with this product number.
1747-07 [Wrist Strap]
Two (2) included in Set,
One (1) with this product number.
1747-08-6 [Set of 6 Cords]
1747-09 [Suction Holder]
|
|
|
Beard Distal Bicep Retractor
Designed to help optimize surgical exposure during anterior single incision distal biceps tendon reinsertion |
|
|
|
Designed by David Beard, MD |
|
|
|
The blade design features an anatomically contoured distal end to hug the radius cortex. The smooth distal end helps to avoid deep penetration, and the width matches the width of the distal biceps tendon insertion site. The narrow curved handle design helps to optimize workspace and visualization. Sold as a set, or available individually for replacement.
Product No's:
5834-00 [Set – Retractor & Two Blades]
Individual/Replacement Parts:
5834-01 [Blade] 1 blade with this product number
Overall Length: 6.375" (16,2 cm)
Width: .625" (16 mm)
5834-02 [Self-retaining Retractor]
Overall Length: 7.5" (19,1 cm)
|
|
|
Beard Distal Radius Wide Hohmann Retractor
Designed for distal radius and diaphyseal fracture exposure, the wide blade design helps to protect soft tissues, and the curved handle helps provide improved access and visualization |
|
|
|
Designed by David Beard, MD |
|
|
|
Product No: 5837-01
Overall Length: 5.375 (13,7 cm)
Blade Width: 1" (25 mm)
|
|
|
Burgess Carpal Tunnel Retractor
Designed for exposure during carpal tunnel surgery
|
|
|
|
Designed by Kraig Burgess, DO |
|
|
|
Product No: 1887
Overall Length: 4.25" (10,8 cm)
Blade Length: 12 mm
Blade Depth: 8 mm
|
|
|
Calibrated Ortho Spreader with Slotted Tips
A lamina spreader with a very thin closed profile, designed to enable distraction in tight joint spaces like the subtalar and talonavicular joints |
|
|
|
Designed by Jason Bariteau, MD |
|
|
|
Product No: 1841
Overall Length: 6.75" (17,1 cm)
Prong Length: .5" (12,7 mm)
Calibrations: 10 mm to 35 mm
|
|
|
Chandran Distal Biceps Tissue Protector
Designed to help protect tissue and expose the radial tuberosity during distal biceps tendon repair |
|
|
|
Designed by Rama E. Chandran, MD |
|
|
|
Using downward pressure, the teeth help to engage bone to keep the protector in place.
Product No: 3224
Overall Length: 8" (20,3 cm)
Handle Length: 5.5" (14 cm)
Blade Depth: 1.7" (4,3 cm)
Blade Width: .65" (1,7 cm)
|
|
|
Chung T-Handle Retractors
Designed with a T-handle for easier holding and to help reduce finger and thumb fatigue |
|
|
|
Designed by Raymond Chung, MD |
|
|
|
Product No's:
1159 [Sharp Rake]
Overall Length: 4.5" (11,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1161 [Blunt Rake]
Overall Length: 4.5" (11,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1162 [Senn]
Overall Length: 4.5" (11,4 cm)
Blade Width: 6 mm
Blade Depth: 16 mm
1159-01 [Extended Sharp Rake]
Overall Length: 5.625" (14,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1161-01 [Extended Blunt Rake]
Overall Length:5.625" (14,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1162-01 [Extended Senn]
Overall Length: 5.625" (14,4 cm)
Blade Width: 6 mm
Blade Depth: 16 mm
|
|
|
Chung Weitlaner Retractor
Features long prongs allowing use of a small retractor in a small, but deep wound |
|
|
|
Designed by Raymond Chung, MD |
|
|
Prong lengths of 25mm and 30mm now available
with either sharp or blunt tips, in both 3x2 or 3x4 prong versions.
|
Particularly useful for volar approach to the distal radius in large patients and for mini-open rotator cuff surgery.
Product No’s:
BLUNT TIPS
5065 [2x3 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5065-01 [3x4 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5067 [2x3 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
5067-01 [3x4 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
SHARPS TIPS
5066 [2x3 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5066-01 [3x4 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5068 [2x3 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
5068-01 [3x4 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
|
|
|
Desai Clearview Open Blade Self-Retaining Retractor
Open blade design allows clear visualization of soft tissue and neurovascular structures being retracted |
|
|
|
Designed by Sarang Desai, DO |
|
|
|
Tapered blades allows 90° deep soft tissue retraction and easy insertion into the wound.
Open blades also allow surgeon to work in open blade area, such as for gastroc recession surgery.
Product No: 1858
Overall Length: 7.25" (18,4 cm)
Blade Depth: 3" (7,6 cm)
Blade Width: 1.25" (3,2 cm)
|
|
|
Ditmars Carpal Tunnel Release Set
Designed to help retract and provide access for carpal tunnel release operations |
|
|
|
Designed by Donald M. Ditmars Jr., MD |
|
|
|
Product No's:
1132-00 [Carpal Tunnel Release Set with Case]
Individual/Replacement Parts:
1132-01 [Large Curved Release Retractor]
Overall Length: 5" (12,8 cm)
Handle Length: 3" (7,6 cm)
Inside Tube Diameter: 7,5 mm
1132-02 [Small Curved Release Retractor]
Overall Length: 4.75" (12 cm)
Handle Length: 3" (7,6 cm)
Inside Tube Diameter: 4 mm
1132-03 [Straight Carpal Tunnel Probe]
Overall Length: 7.5" (19,1 cm)
Handle Diameter: .25" (6,25 mm)
1025 [Sterilization Case]
|
|
|
Dodson Modular Retractor
Designed to expose the volar aspect of the distal radius for internal fixation, and can also be used for ulna, humerus, and fibula fractures |
|
|
|
Designed by Mark A. Dodson, MD
U.S. Patent #9,161,745 B2 |
|
|
 
|
Allows the limb to be rotated (pronated or supinated) without loss of exposure. The hohmann retractors have three hole sizes which allow for a variety of positioning angle options using the teeth of the self-retaining retractor, or can also be positioned in-between the teeth. The hohmann is placed around the bone, and thus reduces the force on the soft tissues while increasing exposure. Can be used in the forearm to treat radius and ulna shaft fractures, humerus fractures, as well as in the leg for fibula fractures.
The Optional OrthoLucent™ blade is made of a strong, lightweight carbon fiber PEEK composite material, which is completely radiolucent, helps to prevent from marring component surfaces, and can be steam sterilized.
U.S. Patent # 9,161,745 B2
Product No: 1838-00 [Set]
Set consists of one self-retaining retractor, two stainless steel mini-hohmann retractor blades, and a sterilization case.
Replacement Parts:
1838-01 [Retractor Only]
Overall Length: 5.5" (14 cm)
1838-02 [Stainless Steel Blade Only – One]
(Two included in set – one with this product number)
Overall Length: 5.25" (13,3 cm)
Blade Width: 3/8" (9 mm)
1025 [Sterilization Case Only]
Optional Parts:
1838-02R [OrthoLucent™ Blade Only – One]
Overall Length: 5.25" (13,3 cm)
Blade Width: 3/8" (9 mm)
|
|
|
Extra Small Joint, Calcaneal and Small Bone Distractor
Two hole sizes allow for easier pin size selection and helps with distraction in fracture and osteotomy procedures
|
|
|
|
|
|
|
|
1/16" (1.6 mm) & 3/32" (2.4 mm)
Pin Hole Diameters
Product No: 4210-XSD [Extra Small Distractor]
Overall Length: 4.25" (10,8 cm)
|
|
|
Faillace Ambidextrous Self-Retaining Retractors
Handle is designed to be rotated away from the surgeon after placement if desired |
|
|
|
Designed by John J. Faillace, MD |
|
|
|
Product No's:
1579 [4 Teeth]
Overall Length: 6" (15,2 cm)
Prong Depth: 38 mm
Prong Width: 18 mm
1580 [7 Teeth]
Overall Length: 7.5" (19,1 cm)
Prong Depth: 38 mm
Prong Width: 34 mm
1579-01 [Small – 4 x3 Teeth]
Overall Length: 5.25" (13,3 cm)
Prong Depth: 20 mm
Prong Width: 18 mm / 13 mm
|
|
|
Gurbani Joint Distractor/Compressor
Versatile joint distractor/compressor provides 360° freedom for arthroscopic or open procedures of foot, ankle, hand, and wrist joints
|
|
|
|
Designed by Naren G. Gurbani, MD |
|
|
|
The surgeon puts the pins in the bone, then slides the holes of the device over the pins and distracts or compresses—the device can be locked in either direction. Especially useful for arthroscopy of subtalar, talo-navicular, calcaneo-cuboid, and wrist joints. The T-wrench helps provide precise, controlled manipulation.
Pin Hole Sizes:
.15" (3,5 mm) and .182" (4,5 mm)
Product No’s:
4208-00 [Set with Case]
Includes: Distractor/Compressor, T-Wrench, and Case
4208-01 [Distractor/Compressor Only]
Dimensions: 6" w x 5" h (15,2 cm x 12,7 cm)
Distracts up to: 3" (7,6 cm)
Compresses down to: .5" (1,3 cm)
4208-TW [T-Wrench]
Dimensions: 3" w x 3" h (7,6 cm x 7,6 cm)
1025 [Sterilization Case]
|
|
|
Hendren Neuroma Retractor
Narrow tines are delicate on tissue, but sturdy enough to retract bone |
|
|
|
Designed by Douglas H. Hendren, MD |
|
|
 |
Useful during neuroma and other surgeries,the retractor helps free assisting personnel and helps provide excellent exposure.
Product No’s:
1680-01 [Small]
Overall Length: 4.25" (10,8 cm)
1680-02 [Large]
Overall Length: 5.5" (14 cm)
|
|
|
HFD Compressor/Distractors
Dial mechanism helps allow precise control of inserted wires in small bone surgery, for maintaining a position, compressing or distracting
|
|
|
|
|
|
|
|
On the small units, a .125" (3,2 mm) pin can be used in the holes of the thumbwheel for leverage.
There are two versions of the small and large size: one all stainless steel, one with radiolucent arms.
Radiolucent arms are a PEEK/Carbon Fiber composite.
All models are steam sterilizable.
Product No's:
1834 [Small — All Stainless Steel]
Dimensions: 51 mm x 57 mm
Maximum Arm Opening: 1.35" (3,4 cm)
Holes: For pins up to .045" (1,1 mm) & .062" (1,6 mm)
1834-R [Small with Radiolucent Arms]
Dimensions: 51 mm x 57 mm
Maximum Arm Opening: 1.35" (3,4 cm)
Holes: For pins up to .045" (1,1 mm) & .062" (1,6 mm)
1836 [Large]
Overall Length: 4" (10,2 cm)
Maximum Arm Opening: 2.25" (5,7 cm)
Holes: For pins up to .082" (2,0 mm) &.125" (3,2 mm)
1836-R [Large with Radiolucent Arms]
Overall Length: 4" (10,2 cm)
Maximum Arm Opening: 2.25" (5,7 cm)
Holes: For pins up to .082" (2,0 mm) & .125" (3,2 mm)
|
|
|
HFD Self-Retaining Small Bone Spreader
Versatile spreader featuring narrow tapered blades which, when together, make a small wedge to enter a tight bone interface or osteotomy
|
|
|
|
|
|
|
|
Blades feature a non-aggressive grip pattern that can be used when spreading apart bone as well as providing retraction of soft tissue in a smaller wound.
Product No: 1829
Overall Length: 4.5" (11,4 cm)
Blade Depth: 28 mm
Blade Width Tapers from: 8 mm to 5 mm
|
|
|
Holiday Self-Retaining Carpal Tunnel Retractor
Designed for exposure during carpal tunnel surgery
|
|
|
|
Designed by Allan Holiday, MD |
|
|
|
Product No: 1113
Overall Length: 6" (15,2 cm)
|
|
|
J.B. Redler Retractor
|
|
|
|
Designed by M.R. Redler, MD
|
|
|
|
|
Product No: 1645
Overall Length: 5" (12,7 cm)
|
|
|
Joint, Calcaneal and Small Bone Compressors
Designed for compression in fracture and osteotomy procedures
|
|
|
|
|
|
|
|
Two hole sizes allow for
ease of pin size selection:
1/16" (.062") (1.6 mm) &
3/32" (.094") (2.4 mm)
Product No’s:
4210-SC [Small Compressor]
Overall Length: 6" (15,2 cm)
4210-XSC [Extra Small Compressor]
Overall Length: 4.25" (10,8 cm)
|
|
|
Joint, Calcaneal, Small Bone Compressor/Distractor
Selection lever switches the mechanism from compression to distraction |
|
|
|
|
|
|
|
Simply squeeze the handle one time after direction selection to engage the mechanism. Two hole sizes for pin size selection. Calibrated ratchet handle.
Product No: 4865-LS
Overall Length: 8.5" (21,6 cm)
Holes For: .062" & .094" (1.6 & 2.5 mm) K-wire Pins
|
|
|
Joint, Calcaneal and Small Bone Compressor/Distractors with Speed Lock
Speed lock helps allow precise control and prevents unintended release |
|
|
|
|
|
|
|
Helpful in a variety of indications.
Thumbscrews help prevent the unit from sliding on the pins.
Product No's:
Closed Arms with Speed Lock
4216-LS [Large]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 8" (20,3 cm)
4216-SS [Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 6" (15,2 cm)
4216-XS [Extra Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 4.5" (11,4 cm)
Outspread Arms with Speed Lock & Thumbscrews
4217-LB [Large]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 8" (20,3 cm)
Closed Arms with Speed Lock & Thumbscrews
4217-SS [Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 6" (15,2 cm)
|
|
|
Joint, Calcaneal and Small Bone Distractors
Two hole sizes and two arm designs allow for easier pin size selection and helps with distraction in a variety of indications
|
|
|
|
|
|
|
 
|
Product No’s:
SMALL
Overall Length: 6" (15,2 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4210-SS [Closed Arms]
4210-SB [Outspread Arms
LARGE
Overall Length: 8" (20,3 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4210-LS [Closed Arms]
4210-LB [Outspread Arms]
Thumbscrews help prevent the unit from sliding on the pins
SMALL WITH THUMBSCREWS
Overall Length: 6" (15,2 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4215-SS [Closed Arms]
4215-SB [Outspread Arms]
LARGE WITH THUMBSCREWS
Overall Length: 8" (20,3 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4215-LS [Closed Arms]
4215-LB [Outspread Arms]
|
|
|
Kakar Carpal Tunnel Retractors
Designed for maximum ergonomic positioning and soft tissue retraction to permit release of the transverse carpal ligament through a mini open technique |
|
|
|
Designed by Sanj Kakar, MD |
|
|
|
Product No's:
1126 [Small]
Overall Length: 6" (15,2 cm)
Blade: 8 mm Wide x 11 mm Tall
1127 [Large]
Overall Length: 6" (15,2 cm)
Blade: 15 mm Wide x 20 mm Tall
|
|
|
Kawell Short Army Navy Retractor
A short (4.75") handled Army Navy retractor, especially useful with a gastrocnemius recession |
|
|
|
Designed by Ron Kane, DPM |
|
|
|
Product No: 1148
Overall Length: 4.75" (12,1 cm)
Large End Blade Length: 1.75" (4,4 cm)
Large End Blade Width: .625" (1,6 cm)
Small End Blade Length: 1" (2.5 cm)
Small End Blade Width: .3125" (0,8 cm)
|
|
|
Large Pin Distractor and Compressor
Larger 1/8" (3,2 mm) pin hole size for extra sturdy distraction or compression |
|
|
|
|
|
|
|
Product No's:
4233 [Large Pin Distractor]
Hole Diameters: For .125" (3,2 mm) K-wire Pins
Overall Length: 8" (20,3 cm)
4234 [Large Pin Compressor]
Hole Diameters: For .125" (3,2 mm) K-wire Pins
Overall Length: 8" (20,3 cm)
|
|
|
Lawton Distal Radius Mini Frame & Blade Set
Designed for self-retaining exposure for distal radius and other small bone fractures |
|
|
|
Designed by Jeffrey Lawton, MD |
|
|
|
Set includes: (1) Frame, (2) Short Blades, (2) Small Blades. Optional Large Blade available separately.
Product No: 1578-00 [Set]
Patent Pending
Set Includes / Available Individually:
1578-01 [Mini Frame]
Dimensions: 3" x 2.5" (7,6 x 6,4 cm)
1578-02 [Mini Short Blade]
(2) included in set, (1) with this product number
Overall Length: 2.5" (6,4 cm)
Blade Width: .625" (16 mm)
Blade Depth: .875" (22 mm)
1578-03 [Mini Small Blade]
(2) included in set, (1) with this product number
Overall Length:2.625" (6,7 cm)
Blade Width: .625" (16 mm)
Blade Depth: 1.125" (29 mm)
Optional Blade / Not Included In Set:
1578-04 [Mini Large Blade]
Overall Length: 2.5" (6,4 cm)
Blade Width: .935" (24 mm)
Blade Depth: 1.125" (29 mm)
|
|
|
Mantis Screwdriver Distractor
Designed to help provide stable distraction across difficult-to-reduce fractures using two seated screwdrivers* |
|
|
|
Designed by J. Albert Diaz, MD |
|
|
|
Accommodates screwdrivers of varying size for use with both small and large fragment systems.
Allows for distraction of difficult-to-reduce fractures without the need to drill additional holes outside of the plate.
The plate can be locked with a screw once length has been restored.
*Screwdrivers not included.
Product No: 3654
Overall Length: 7.5" (19,1 cm)
Pin Hole Diameters: 4.5, 5.5, & 8.5 mm
Leg & Pin Hole Depth: .7" (17,5 mm)
|
|
|
Modified Mini Hohmann Retractors
Used for small bone surgery
|
|
|
|
Designed by Jeffrey Lawton, MD
|
|
|
|
|
Product No’s:
1665 [Blade: 6 mm Wide / 35 mm Drop]
Overall Length: 5.875" (14,9 cm)
Blade Width: 6 mm
Blade Drop: 35 mm
1665-01 [Blade: 6 mm Wide / 17 mm Drop]
Overall Length: 5.5" (14 cm)
Blade Width: 6 mm
Blade Drop: 17 mm
1666 [Blade: 8 mm Wide / 35 mm Drop]
Overall Length: 5.875" (14,9 cm)
Blade Width: 8 mm
Blade Drop: 35 mm
1666-01 [Blade: 8 mm Wide / 17 mm Drop]
Overall Length: 5.5" (14 cm)
Blade Width: 8 mm
Blade Drop: 17 mm
1666-02 [Blade: 8 mm Wide / 17 mm Drop] NEW!
Overall Length: 6.25" (15,9 cm)
Blade Width: 8 mm
Blade Drop: 17 mm
1666-LG [Blade: 8 mm Wide / 72 mm Drop] NEW!
Overall Length: 7.125" (18,1 cm)
Blade Width: 8 mm
Blade Drop: 72 mm
|
|
|
Monaco Small Space Retractor
Designed to retract adipose tissue and surrounding soft tissue structures through a small incision for open plantar fasciotomies, neuroma excisions and the lateral release during bunion surgery |
|
|
|
Designed modified by Spencer Monaco, DPM, FACFAS |
|
|
|
Also useful for various hand surgeries such as open carpal tunnel surgery.
Product No: 1887-01
Overall Length: 4.25" (10,8 cm)
Blade Depth: 18 mm
Blade Width: 12 mm
Blade Lip: 3.5 mm
|
|
|
OrthoLucent™ Mini Hohmann Retractors
Radiolucent, lightweight retractors |
|
|
|
Designed by Jeffrey Lawton, MD |
|
|
|
The carbon fiber PEEK material is strong, lightweight, completely radiolucent, can be steam sterilized, and helps to prevent from marring component surfaces.
Product No's:
1594-R [8 mm Blade]
Overall Length: 6.875" (17,5 cm)
Blade Width: 8 mm
1597-R [16 mm Blade]
Overall Length: 6.875" (17,5 cm)
Blade Width: 16 mm
|
|
|
Ortho Self-Retaining Retractor with Pin Guides
Designed for small joint use with pin guides that are set back to allow either direct distraction or distraction with pins |
|
|
|
Designed by Sean Dunn, DPM |
|
|
|
Other Uses Include:
• Osteotomy distraction (such as the Evans or Cotton in the foot)
• Joint distraction for arthodesis or lengthening applications
• Fracture distraction
Features Include:
• Parallel pin guides allow pins up to 2 mm
•
Serrated outside blades extend .4" (1 cm) beyond end of pin guides
Product No: 1842-02
Overall Length: .5" (16,5 cm)
Blade Width: 7 mm
Blade Extension (beyond guides): .4" (1 cm)
Blade Thickness: 1.68 mm
Pin Guide Length: 1.25" (3,2 cm)
Pin Guide Internal Diameter: .085" (2,1 mm)
|
|
|
Slavitt Phalangeal Forceps
Designed to enable the surgeon to provide joint distraction and stability during prosthesis placement at the base of the proximal phalanx of the lesser digits
|
|
|
|
Designed by Jerome Slavitt, DPM
|
|
|
|
|
Helps to distract the joint and hold the bone, allowing easier access to the base. Can also be used for digital fusions to hold bones better for drilling and cutting applications.
Product No: 1163
Overall Length: 6" (15,2 cm)
Clamp Internal Opening Diameter: 4 mm
|
|
|
Stanton Forward Retractors
Designed to work as “tissue pushers”, helping to enhance exposure by allowing the surgeon or an assistant to push forward the opposite side of the wound while retracting (or not) the nearer side
|
|
|
|
Designed by John L. Stanton, MD, FACS
|
|
|
 |
Helps the assistant to hold the wound open without becoming fatigued and having to reach around to the opposite side of the wound to use another retractor.
|
|
|
Stanton Forward Ragnell Retractor
|
|
|
|
Designed by John L. Stanton, MD, FACS
|
|
|
|
Product No: 4510-01
Overall Length: 6.25" (15,9 cm)
Blade Offset: 1.625" (4,1 cm)
Blade Width: 3.1 mm
Blade Depth: Shallow 13 mm, Deep 19 mm
|
|
|
Stanton Forward Rake Retractors
|
|
|
|
Designed by John L. Stanton, MD, FACS |
|
|
|
Product No's:
4514-01 [Shallow]
Overall Length: 6.25" (15,9 cm)
Blade Offset: 1.625" (4,1 cm)
Blade Width: 5.1 mm
Blade Depth: 10 mm
4514-02 [Deep]
Overall Length: 6.25" (15,9 cm)
Blade Offset: 1.625" (4,1 cm)
Blade Width: 5.1 mm
Blade Depth: 17 mm
|
|
|
Swanson Elevator
Angular design helps to go around bone for retraction and elevation — especially useful in small bone surgery of the hand/wrist and foot/ankle |
|
|
|
Designed by Richard Ferkel, MD |
|
|
|
Product No: 1644
Overall Length: 6.375" (16,2 cm)
Blade Depth: .75" (1,9 cm)
|
|
|
Vaughan Distal Bicep Tendon Repair Retractor
Designed to retract in a continuous way in three directions, helping to prevent the surrounding vital structures from entering the field while drilling or performing the repair work |
|
|
|
Designed by Roderick A. Vaughan, MD |
|
|
 |
Product No: 3223
Overall Length: 8.375" (21,3 cm)
Handle Length: 5.25" (13,3 cm)
Depth: 2" (5,1 cm)
|
|
|
Weinraub Joint and Calcaneal Spreaders
Designed to assist in the opening of small joints of the hand and foot for the application of fusion and graft techniques |
|
|
|
Designed by G. Weinraub, DPM, FACFAS |
|
|
|
Provides excellent joint exposure without blocking intra-articular or osteotomy access. Helps prevent slippage or falling out of the joint by placing the arms on either side of the area to be distracted, driving two pins and opening the joint.
Product No's:
1870 [Standard 1.6 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .062" (1/16") (1.6 mm)
1870-SL [Speed Lock 1.6 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .062" (1/16") (1.6 mm)
1872 [Standard 2.8 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .11" (7/64") (2.8 mm)
1872-SL [Speed Lock 2.8 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .11" (7/64") (2.8 mm)
|
|
|
Williams Distal Radius Fracture Retractor
Designed to provide excellent exposure during fracture reduction and plating |
|
|
|
Designed by Craig S. Williams, MD and Eric Dahlinger |
|
|
|
Long straight arms allow parallel retraction of the incision, while the deep blades with a pronounced distal “curl” help maintain soft tissue retraction.
The solid, concave ulnar blade helps prevent soft tissue from being captured by the drill bit when drilling the ulnar holes, and helps to protect the median nerve and flexor tendons.
The blade on the radial side is a deep blunt tip Wietlaner-style.
Two .045” (1.1 mm) guidewire holes are attached to the arms just proximal to both blades. The holes are angled in slightly varying directions to allow choice of placement of stabilizing pins into the distal radius to prevent rotation or migration of the retractor throughout the procedure.
Product No: 1837-L [Left]
For Pins up to .045" (1.1 mm)
Overall Length: 4.5" (11,4 cm)
Blade Depth: 20 mm
Blade Width: 12.5 mm
Product No: 1837-R [Right]
For Pins up to .045" (1.1 mm)
Overall Length: 4.5" (11,4 cm)
Blade Depth: 20 mm
Blade Width: 12.5 mm
|
|
|
Wilson Trigger Finger Retractor
Helps provide improved exposure, which frees up the assistant and gives easier and better visualization of the tendon sheath in a trigger finger procedure |
|
|
|
Designed by Ralph V. Wilson, MD |
|
|
|
Also useful in other small incision surgeries. Can use with Morton's neuroma and hand arthroplasty procedures.
Product No: 1884
Overall Length: 4.25" (10,8 cm)
Blades: 6.5 mm Wide x 10 mm Deep
|
|
|
Woods Retractor
A retractor for use in the foot, ankle, wrist and elbow |
|
|
|
Designed by Richard Ferkel, MD |
|
|
|
Product No: 1147
Overall Length: 5.75" (14,6 cm)
Rake Blade Width: .675" (1,7 cm)
Rake Blade Depth: .675" (1,7 cm)
Flat Blade Width: .39" (1 cm)
Flat Blade Depth: 1" (2,54 cm)
|
|
|
Wurapa Small Joint Compressor and Pin Distractor
Designed to allow one-handed manipulation and deployment once fixation pins are placed
|
|
|
|
Designed by Raymond K. Wurapa, MD
|
|
|
|
|
Designed to simplify several small joint procedures:
- Useful for intercarpal stabilization while performing ligament reconstructions (e.g. scapholunate ligament repair/reconstruction)
- Preparation of small bone non-unions before bone grafting and fixation
- Preparation of small joints for arthrodesis (e.g. partial wrist fusion)
- Distract and better evaluate small joints before determining final management.
|
Pins should be cut short above the pin guides to allow full access to the operative site.
Product No’s:
1751 [Double 1.1 & 1.6 mm Hole Compressor]
Compresses From: 28 mm
Overall Length: 4.625" (11,7 cm)
1752 [Double 1.1 & 1.6 mm Hole Distractor]
Distracts to: 46 mm
Overall Length: 4.625" (11,7 cm)
1753 [Single 1.1 mm Hole Compressor]
Compresses From: 28 mm
Overall Length: 4.5" (11,4 cm)
1754 [Single 1.1 mm Hole Distractor]
Distracts to: 46 mm
Overall Length: 4.5" (11,4 cm)
|
|
|
Wurapa Swivel Blade Forearm Retractor
Designed for forearm and wrist fracture exposure, the blades swivel for less stress on soft tissue |
|
|
|
Designed by Raymond Wurapa, MD |
|
|
|
Swivel-blade technology helps to allow parallel deployment of retractor blades to maximize wound exposure and minimize edge loading on surrounding soft tissues.
Parallel deployment of the retractor blades also helps prevent rotation and migration of the retractor during a procedure.
Product No's:
1646-00 [Set]
Includes Retractor and Two Swivel Blades
Set includes:
1646-01 [Retractor]
Overall Length: 5.125" (13 cm)
Opens to: 2.5" (6,4 cm)
1646-02 [Swivel Blade]
One blade with this product number, two included in set)
Width: .9375" (24 mm)
Depth: .75" (19 mm)
|
|
|
© 2023 Innomed, Inc. All rights reserved.
|
