Click thumbnail image for details
|
|
|
|
|
|
|
NEW! Bechtold Ergonomic Orthopedic Mallet
|
Bone Hooks
|
Bone Hook with Cable/Wire Hole
|
Browner Wire Tightener
|
|
|
|
|
|
|
Desai Surgical Funnel
|
DMP Wire Tightener |
Extended Double Action Pliers
|
Extra Long Grasper
|
Femoral Head Disengaging Punch
|
|
|
|
|
|
|
|
|
Flexible Ball Nose Reamer
|
Jones Mallet
|
Incavo Wire Passer
|
Kudrna Hip Stem Taper Protectors
|
Lawrence Revision Knee Gap Balancing Tensioner Set
|
|
|
|
|
|
|
Levy Humeral Stem Extraction Punch
|
Lombardi Bone Hooks |
Lombardi Cement/Antibiotic Sifter
|
Lombardi Taper Cleaner
|
Long Bonney Tissue Forceps
|
|
|
|
|
 |
|
Long Jaw Needle Nose Pliers
|
NEW! Ortho Mallets
|
Ortho Mallets with Easy Grip Handles
|
Orthopedic Needle Holder/Scissors
|
Sarraf Coated Hip Dislocation Hook
|
|
|
|
|
 |
|
Soft Impact Mallets
|
Star Metal Cup Liner Removal Impactor
|
Surgical Spoon
|
Universal Screwdriver Set
|
Whelan Double-Ended Suture Wire Passer
|
|
|
Bechtold Ergonomic Orthopedic Mallet
Ergonomically designed for forward and backward strikes, featuring an ergonomic handle with a tamp |
|
|
|
Designed by Dustin Bechtold, MD |
|
|
|
Stainless steel head and shaft with an aluminum handle with a right-handed grip.
Large and small striking heads with smooth surface.
Palmar side of the mallet features a flat surface to slide along a broach or impacting type instrument for back slapping and serves well as an additional striking surface.
Product No: 7822 [2.7 lbs (1,22 kg)]
Weight: 2.7 lbs (1.22 kg)
Overall Length: 10.75" (27,3 cm)
Head Width: 4" (10,2 cm)
Large Head Diameter: 2" (5,1 cm)
Small Head Diameter: 1.5" (3,8 cm)
|
|
|
Bone Hooks
|
|
|
|
Designed by R.L. Wixson, MD
|
|
|
|
|
Designed for proximal femoral elevation in total hip replacement or in other surgery with a similar need for bone manipulation. The instrument has a blunt tip and a large handle to accommodate the use of two hands if desired.
Product No's:
5910 [Small]
Curve Diameter: 25 mm
Overall Length: 12.75" (32,4 cm)
Handle Length: 4.75" (12,1 cm)
5915 [Medium]
Curve Diameter: 35 mm
Overall Length: 12.75" (32,4 cm)
Handle Length: 4.75" (12,1 cm)
5920 [Large]
Curve Diameter: 50 mm
Overall Length: 12.75" (32,4 cm)
Handle Length: 4.75" (12,1 cm)
|
|
|
Bone Hook with Cable/Wire Hole
|
|
|
|
Designed by R.L. Wixson, MD & J. McCarthy, MD
|
|
|
 |
The instrument has a blunt tip with a 2mm cable/wire hole, and a large handle to accommodate the use of two hands if desired.
Product No: 5920-01
Cable/Wire Hole Diameter: 2 mm
Curve Diameter: 50 mm
Overall Length: 12.75" (32,4 cm)
Handle Length: 4.75" (12,1 cm)
|
|
|
Browner Wire Tightener
Wire is passed through the distal arm hole and into the separate drum holes, and can then be tightened and rotated before being cut with a wire cutter
|
|
|
|
Designed by Bruce D. Browner, MD |
|
|
|
Product No: 8251
Overall Length: 6" (15,2 cm)
Width: 3.75" (9,5 cm)
Wire Hole Diameters: .125" (3,2 mm)
|
|
|
Desai Surgical Funnel
Helps with control and placement of bone graft or antibiotic beads |
|
|
|
Designed by Sarang Desai, DO |
|
|
|
Made from surgical grade stainless steel (for sterilization purposes).
Product No: 8989
Overall Length: 6.25" (15,9 cm)
Handle Length: 3.25" (8,3 cm)
Funnel Diameter at Top: 3" (7,6 cm)
Funnel Flow-thru Diameter: 11 mm
|
|
|
DMP Wire Tightener
Used to hand tighten a cerclage wire around a bone |
|
|
|
Designed by DMP |
|
|
 |
Now with four wire holes — two for up to 20 gauge wires, and two for up to 18 gauge wires. T-Handle end is used to hand tighten a wire.
Product No: 8729
Overall Length: 4.5" (11,4 cm)
Handle Width: 2.625" (6,7 cm)
End Diameter: 15 mm
|
|
|
Extended Double Action Pliers
|
|
|
|
|
|
|
 |
Product No’s:
3962 [Needle Nose]
Overall Length: 13" (33 cm)
Jaw Length: 2.625" (6,7 cm)
Jaw Width: 2.5 mm
3961 [Blunt Nose]
Overall Length: 11.75" (29,9 cm)
Jaw Length: 1.25" (3,2 cm)
Jaw Width: 10 mm
|
|
|
Extra Long Grasper
Designed for reaching deep into the medullary canal |
|
|
|
|
|
|
|
Product No: 1782
Overall Length: 15" (38,1 cm)
|
|
|
Femoral Head Disengaging Punch
Designed to help protect the femoral stem trunnion while removing the femoral head |
|
|
|
Designed by Brandon Thompson, CST/CFA |
|
|
|
.jpg)
The delrin pad helps prevent scratching of the femoral stem trunnion. The punch angle allows for better striking force to help break the taper of the head and stem.
THE DELRIN PAD SHOULD NOT BE USED FOR IMPACTION.
Product No: 8626
Overall Length: 9" (22,9 cm)
Shaft Diameter: .5" (12,7 mm)
Punch Platform Offset Angle: 30°
Punch Platform Delrin End: 10 mm x 20 mm
|
|
|
Flexible Ball Nose Reamer
Designed for safe and effective use in removing pedestal formation in the femoral and tibial canals |
|
|
|
Designed by Stu Allen |
|
|
|
Recommended for use with a guide wire. Cannulated to allow guide wire use. Connects with a Zimmer Hall Quick-connect for use with a driver.
Product No: 2628
Overall Length: 10" (25,4 cm)
Reamer Diameter: 7,5 mm
Quick-connect Driver Available:
8248 [Fixed Driver with Zimmer Hall Quick-connect]
Overall Length: 5.75" (15,6 cm)
Handle Width: 4.625" (11,6 cm)
|
|
|
Incavo Wire Passer
Used for passing multiple cerclage wires around bone |
|
|
|
Designed by Stephen Incavo, MD |
|
|
|
Designed to pass multiple cerclage wires around a bone during a multiple wire wrap procedure. Accepts a 5/32" (4 mm) diameter wire.
Product No's:
8610-01 [Small]
Overall Length: 7.5" (19,1 cm)
Accepts Wire Up To: 4 mm (5/32")
For Bone Diameter Up To: 1.2" (3 cm)
8610-02 [Large]
Overall Length: 8.675" (21,9 cm)
Accepts Wire Up To: 4 mm (5/32")
For Bone Diameter Up To: 2.4" (6 cm)
|
|
|
Jones Mallet
Unique hand fitting shape provides superior gripping strength
|
|
|
|
Designed by Dickie Jones, MD
|
|
|
|
|
This striking instrument has a unique hand fitting shape that provides superior gripping strength for accurate light to heavy impaction.
Product No: 7825 [2.4 lbs (1,09 kg)]
Overall Length: 8.25" (21 cm)
Head Width: 3" (7,6 cm)
Head Diameter: 1.5" (3,8 cm
|
|
|
Kudrna Hip Stem Taper Protectors
Used to cover and protect the hip stem taper of a femoral component — especially helpful in cup revision surgery |
|
|
|
Designed by James Kudrna, MD |
|
|
|
Product No's:
1151 [11/13]
1152 [12/14]
1153 [14/16]
|
|
|
Lawrence Revision Knee Gap Balancing Tensioner Set
Designed to help tense the medial and lateral ligaments for gap balancing during revision surgery so that the AP cutting block does not impinge on the spreader during balancing |
|
|
|
Designed by Jeffrey M. Lawrence, MD |
|
|
|
Product No's:
1896-01 [Set – Left & Right]
Also Available Individually:
1896-01L [Left]
Overall Length: 9.25" (23,5 cm)
Pad Diameter: 1" (2,5 cm)
1896-01R [Right]
Overall Length: 9.25" (23,5 cm)
Pad Diameter: 1" (2,5 cm)
|
|
|
Levy Humeral Stem Extraction Punch
Ultra hard cobalt chrome shaft and impactor tip designed to help remove a humeral stem during revision total shoulder arthroplasty |
|
|
|
Designed by Jonathan Levy, MD |
|
|
|
Can be used to open up distal cement mantle or pedestal during revisions.
Product No: 8627
Overall Length: 12" (30,5 cm)
Handle/Platform Length: 4.75" (12,1 cm)
Punch Rod Length: 7.25" (18,4 cm)
Platform: 3" x .75" (7,6 cm x 1,9 cm)
Shaft Diameter: 8 mm, tapers to 4 mm at tip
|
|
|
Lombardi Bone Hooks
|
|
|
|
Designed by Adolph V. Lombardi, Jr., MD
|
|
|
|
|
3 Sizes Available
Product No’s:
5925 [Small]
Curve Diameter: 25 mm
Overall Length: 10" (25,4 cm)
5930 [Medium]
Curve Diameter: 35 mm
Overall Length: 10" (25,4 cm)
5935 [Large]
Curve Diameter: 55 mm
Overall Length: 10" (25,4 cm)
|
|
|
Lombardi Cement/Antibiotic Sifter
|
|
|
|
Designed by Adolph V. Lombardi Jr., MD |
|
|
|
Product No: 5215
Overall Length: 14" (35,6 cm)
Sifter Diameter: 5" (12,7 cm)
|
|
|
Lombardi Taper Cleaner
Designed to help clean a hip stem taper of corrosive byproducts prior to placement of the new femoral head |
|
|
|
Designed by Adolph V. Lombardi Jr., MD |
|
|
|
Product No's:
8034 [Small Short Taper 11.3/12.2 mm]
Overall Length: 2.125" (5,4 cm)
Outside Diameter: 1" (2,54 cm)
8034-01 [Long Taper 11.4/13.4 mm]
Overall Length: 2.125" (5,4 cm)
Outside Diameter: 1" (2,54 cm)
8035-01 [Standard Taper 11/13 mm]
Overall Length: 2.125" (5,4 cm)
Outside Diameter: 1" (2,54 cm)
8035-02 Standard Taper 12/14 mm]
Overall Length: 2.125" (5,4 cm)
Outside Diameter: 1" (2,54 cm)
8035-03 [Standard Taper 14/16 mm]
Overall Length: 2.125" (5,4 cm)
Outside Diameter: 1" (2,54 cm)
|
|
|
Long Bonney Tissue Forceps
Extra length—3" (7,6 cm) more than standard—allows for use in deep wound areas |
|
|
|
|
|
|
 |
Product No: 5040
Overall Length: 10" (25,4 cm)
|
|
|
Long Jaw Needle Nose Pliers
|
|
|
|
|
|
|
|
|
Product No: 1833
Overall Length: 7" (17,8 cm)
Jaw Length: 2.25" (5,7 cm)
Jaw Width Tapered from: 8 mm to 1.5 mm
Jaw Height Tapered from: 12 mm to 2.5 mm
|
|
|
Ortho Mallets
Larger diameter handle for better grip, and longer |
|
|
|
|
|
|
|
Product No's:
7811 [Standard with Flat Sides]
Overall Length: 7.75" (19,7 cm)
Handle Length: 4.812 (12,2 cm)
Head Diameter: 1.5" (3,8 cm)
Weight: 2.25 lb. (1.02 kg)
7812 [Standard]
Overall Length: 7.75" (19,7 cm)
Handle Length: 4.812 (12,2 cm)
Head Diameter: 1.5" (3,8 cm)
Weight: 2.5 lb. (1.13 kg)
|
|
|
Ortho Mallets with Easy Grip Handles
Designed to exert force on osteotomes, chisels, gouges and other instruments
|
|
|
|
Cloward-style designed by J. Stiehl, MD
|
|
|
|
|
These solid stainless steel mallets
each have a comfortable 4-1/2" grip
made of a textured silicone that helps
prevent the surgeon’s gloved hand from
slipping and helps maintain a solid grip.
Product No's:
7810 [Small]
Overall Length: 8" (20,3 cm)
Handle Length: 4.5" (11,4 cm)
Head Weight: 1 lb. (.45 kg)
Head Diameter: 1.3125" (3,3 cm)
7815 [Large]
Overall Length: 8" (20,3 cm)
Handle Length: 4.5" (11,4 cm)
Head Weight: 1.75 lb. (.8 kg)
Head Diameter: 1.5" (3,8 cm)
|
|
|
Sarraf Coated Hip Dislocation Hook
Designed to aid in dislocating a femoral stem while helping to prevent damage to the trunnion |
|
|
|
Designed by Khaled M. Sarraf, MD |
|
|
|
Coated hook end helps to prevent from marring component surfaces.
Can also be used as a bone hook, and for femoral elevation.
Product No: 5905
Curve Diameter: 50 mm
Overall Length: 12.5" (31,8 cm)
Handle Length: 4.75" (12,1 cm)
|
|
|
Soft Impact Mallets with Easy Grip Handles
Provides shock absorbing force
|
|
|
|
|
|
|
|
Designed to have a shock-absorbing force, providing less bounce or wasted force. The mallet is filled with a shock-absorbing media and has a flat striking surface to keep the mallet centered on an instrument.
The comfortable Easy Grip handle is made of a textured silicone that helps prevent the surgeon’s gloved hand from slipping and helps maintain a solid grip. The bottom can also be used to tap an implant in place.
The mallet with delrin head features a replaceable delrin head.
Product No’s.:
7820 [2 lbs. / .907 kg]
Overall Length: 10.5" (26,7 cm)
Handle Length: 5" (12,7 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.375" (3,5 cm)
7832 [2 lbs. / .907 kg with Replaceable Delrin Head]
Overall Length: 10.5" (26,7 cm)
Handle Length: 5" (12,7 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.375" (3,5 cm)
7837 [3 lbs. / 1,36 kg]
Overall Length: 11" (27,9 cm)
Handle Length: 5" (12,7 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.875" (4,8 cm)
Delrin Head Replacements for 7832:
7832-HEAD01 [.5" Stud] Single
7832-HEAD02 [.5" Stud] 3-Pack
7832-HEAD03 [.875" Stud] Single
7832-HEAD04 [.875" Stud] 3-Pack
 |
|
|
Soft Impact Mallet with Weidman Silicone Handle |
|
|
|
Handle designed by Kevin Weidman, MD |
|
|
|
Product No: 7821 [2 lbs. (.907 kg)]
Overall Length: 10.625" (27 cm)
Grip Length: 5.5" (14 cm)
Head Width: 3.5" (8,9 cm)
Head Diameter: 1.375" (3,5 cm)
|
|
|
Star Metal Cup Liner Removal Impactor
Designed to engage the rim of a metal cup to help with removal of the metal liner |
|
|
|
Designed by Andrew M. Star, MD |
|
|
|
The impactor is placed on the edge of the cup with the tip in the dimple in the cup rim (facing inward.) The impactor should contact the shell and not the liner. Tap sharply several times, then move the impactor to another location at least 90 degrees away from the first and repeat tapping sharply several times. Vibration from tapping the edge of the shell helps cause the liner to become disengaged for removal.
Product No: 5014
Overall Length: 8" (20,3 cm)
|
|
|
Surgical Spoon
Very useful for the application of methylmethacrylate bone graft |
|
|
|
Designed by David Scott, MD |
|
|
|
Made from surgical grade stainless steel (for sterilization purposes).
Product No: 8209
Overall Length: 5.875" (14,9 cm)
|
|
|
Universal Screwdriver Set
Helps eliminate the opening of multiple sterile packs when a specific size or style of screwdriver is needed
|
|
|
|
|
|
|
|
Helpful during revision total joint surgery where screws have been used, removal of bone plates, fracture fixation screws or bone graft screws. Set consists of: 7 (seven) double ended screwdriver bits — small & large single slot, cross & cruciate, 3.5 mm & 4.5 mm hex, small & large phillips, small, medium, & large star — a handle which accommodates any of the above bits, and a sterilization case.
Product No's: 5195 [Complete Set with Case]
Also available individually:
5195-01 [Handle]
5195-02 [Straight (single slot) – Lg & Sm]
Large: 7 x 1.5 mm, Small: 5 x 1 mm
5195-03 [Cross/Cruciate]
Large: 7 mm, Small: 6 mm
5195-04 [Hex]
Large: 4.5 mm, Small: 3.5 mm
5195-05 [Phillips]
Large: 4 mm, Small: 3.5 mm
5195-08 [Small Star: #6 & #8]
5195-06 [Medium Star: #10 & #15]
5195-07 [Large Star: #20 & #25]
|
|
|
Whelan Double-Ended Suture Wire Passer
Passer guide and malleable passer designed to pass suture wires around a bone |
|
|
|
Designed by Edward J. Whelan, III, MD |
|
|
|
The passer guide is placed around the bone, and the thin malleable passer is inserted at the handle end and follows the grooved passer around. The suture wire (up to 18 gauge) is attached to the keyholed end of the passer, which can then be reversed out of the passer, drawing the suture wire around the bone.
Product No's:
8300-00 [Set]
Set includes Passer Guide, two
Passers, and a sterilization case.
Individual Instruments:
8300-01 [Passer Guide]
Overall Length: 8.125" (20,6 cm)
Outside Width: 9 mm
Inside Groove Width: 6.5 mm
8300-02 [Passer]
Overall Length: 7.5" (19,1 cm)
Width: 4.6 mm
1025 [Sterilization Case]
|
|
|
© 2023 Innomed, Inc. All rights reserved.
|
