Innomed, Inc. Orthopedic Instruments

KNEE INSTRUMENTS • surgical tools – curettes and osteotomes

Click thumbnail image for details

Bacastow Femoral Cement Osteotome
Bozeman Cement Trimmer
Cement Remover
Chandran Bent Serrated Curette
Bacastow Femoral Cement Osteotome
Bozeman Cement Trimmer
Cement Remover
Chandran Bent Serrated Curette

Curved Cement Osteotome
Dennis Offset Osteotome
Durham Curved Osteotome
Engh Unicondylar Minimally Invasive Cement Scrapers
Flexible Osteotome System
Curved Cement Osteotome
Dennis Offset Osteotome
Durham Curved Osteotome
Engh Unicondylar Minimally Invasive Cement Scrapers
Flexible Osteotome System
Foster Cement Osteotome
Gelbke Freer Cement Trimmer/Nerve Hook with TiN Coating
Lotke Offset Osteotome

Modified Lambotte Osteotomes

Mini-lexer Osteotomes

Foster Cement Osteotome
Gelbke Freer Cement Trimmer/Nerve Hook with TiN Coating
Lotke Offset Osteotome
Modified Lambotte Osteotomes
Mini-lexer Osteotomes
Mueller-Type Cement
Removal Instruments
Offset Gouge for Posterior Osteophyte Removal in TKA
Ring Curettes
Robb Cement Curette

Sarraf Cement Trimmer
Mueller-Type Cement
Removal Instruments
NEW! Offset Gouge for Posterior Osteophyte Removal in TKA
Ring Curettes
Robb Cement Curette
Sarraf Cement Trimmer
Sarraf Spearhead Cement Exciser
Sarraf Toothed Curettes
Scott Uni & Total Knee Cement Removing Curette
Wagner Osteotome Handle
Whelan Flexible Chisel Guide
Sarraf Spearhead Cement Exciser
Sarraf Toothed Curettes
Scott Uni & Total Knee Cement Removing Curette
Wagner Osteotome Handle
Whelan Flexible Chisel Guide
Whelan Curved Chisel Guide
Wide Offset Osteotome



Whelan Curved Chisel Guide
Wide Offset Osteotome
 
 
 


Bacastow Femoral Cement Osteotome

Uniquely shaped osteotome designed to help trim away cement from around a femoral knee component

 
Designed by David Bacastow, MD


Bacastow Femoral Cement Osteotome


Bacastow Tibial Plateau Elevators Bacastow Tibial Plateau Elevators

Ultra hard titanium nitride coating helps to extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

 



Product No: 5234
Overall Length: 9.25" (23,5 cm)
Width: 6,5 mm
Tongue Length: 7 mm

Download Product Brochure (PDF)

TOP





Bozeman Cement Trimmer

Combines the two most common cement trimming tools combined into one

 
Designed by Daniel M. Gannon, MD


Bozeman Cement Trimmer

The tool has a blunt blade tip on one end to help with separation of the trimmed cement. The angled curette end helps gather the trimmed cement. The thin shank and angled curette can reach into tight spaces such as the back of the implants to remove excess cement. The ends are titanium nitrite coated to help eliminate metal transfer.

 

Product No: 5245
Overall Length: 8.5" (21,6 cm)
Download Product Brochure (PDF)

TOP





Cement Remover

Helps remove unhardened cement around femoral and tibial knee components

   


Designed with sharper faces to help remove unhardened cement around femoral and tibial knee components. The remover is nitrate coated to help protect implant surfaces.

Cement Remover

Cement Remover

Product No: 5230
Overall Length: 7.25" (18,4 cm)
Handle Length: 5" (12,7 cm)
Blade Width: 5 mm
Download Product Brochure (PDF)

TOP





Chandran Bent Serrated Curette

Serrated design allows for easier removal of cancellous bone in the proximal femur in total joint arthroplasty

 
Designed by Rama E. Chandran, MD





Chandran Bent Serrated Curette

Chandran Bent Serrated Curette

Product No: 5171
Overall Length: 11.75" (29,8 cm)
Handle Length: 5.5" (14 cm)
Cup Size: 7 mm X 12 mm

Download Product Brochure (PDF)

TOP





Curved Cement Osteotome

Helps remove cement around the back of the tibia base, and is useful in the femoral notch during removal of a knee femoral component

   


Curved Cement OsteotomeCurved Cement Osteotome

Designed to be inserted around the back of the tibia base to remove cement. The curve is congruent with most tibia bases. During revision knee surgery, can be used to help separate the prosthesis/bone or prosthesis/cement interface. The curve of the osteotome allows it to be used in the femoral notch of a femoral component. The osteotome is nitrate coated to help protect the implant surface.

Product No: 5220
Overall Length: 6.75" (17,1 cm)
Handle Length: 3" (7,6 cm)
Blade Width: 6,8 mm
Download Product Brochure (PDF)

TOP





Dennis Offset Osteotome

Designed to remove osteophytes from the posterior femoral condyles during knee arthroplasty

 
Designed by Douglas Dennis, MD & Paul Lotke, MD


Dennis Offset Osteotome
Dennis Offset Osteotome
Dennis Offset Osteotome
Product No: 4935-W
Overall Length: 9" (22,9 cm)
Blade Width: 18.5 mm
Download Product Brochure (PDF)

TOP





Durham Curved Osteotome

Increased angle useful for posterior osteophytes of the femoral condyle and the humeral head, as well as anterior acetabular osteophytes

 
Designed by Alfred A. Durham, MD


Durham Curved Osteotome

Durham Curved Osteotome

Product No: 4950
Overall Length: 9" (22,9 cm)
Handle Length: 5" (12,7 cm)
Osteotome Width: .625" (1,6 cm)

Download Product Brochure (PDF)

TOP





Engh Unicondylar Minimally Invasive Cement Scrapers

Designed for use in unicondylar minimally invasive knee surgery

 
Designed by Gerard A. Engh, MD


Engh Unicondylar Minimally Invasive Knee Surgery Instruments

Right and left design used to scrape cement from around and behind the implants.

Product No’s:

4920-01 [Cement Scraper – Right]
Scraper Head: 5 mm x 9 mm
Overall Length: 8.5" (21,6 cm)
Handle Length: 3.5" (8,9 cm)

4920-02 [Cement Scraper – Left]
Scraper Head: 5mm x 9mm
Overall Lengths: 8.5" (21,6 cm)
Handle Length: 3.5" (8,9 cm)

Download Product Brochure (PDF)

TOP





Flexible Osteotome System

Provides various osteotome blades for both hip and knee surgery

   


Flexible Osteotome System


Sharp, flexible blades are well suited for loosening implants from cement or bony ingrowth fixation.

Various blade widths and profiles allow great flexibility to follow the implant contours.

Modular handle is made of high impact surgical stainless steel and has a quick-coupling positive locking mechanism for ease of use and quick blade changes.

Slap hammer threads into the handle and is designed to facilitate blade removal.

System includes choice of handle style.


Product No’s:

S0011-00 [Set with Quick-Coupling Handle and Case]

S0012-00 [Set with Locking Nut Handle and Case]



Individual Instruments Included in Sets:
 
S1002 Thin Osteotome Blade
           2.5" (6,3 cm) x 8 mm

S1003 Thin Osteotome Blade
           2.5" (6,3 cm) x 10 mm

S1004 Thin Osteotome Blade
           2.5" (6,3 cm) x 12 mm

S1005 Thin Osteotome Blade
           2.5" (6,3 cm) x 20 mm

S1006 Curved Thin Osteotome Blade
          2.5" (6,3 cm) x 12 mm

S1007 Curved Thin Osteotome Blade
          5" (12,7 cm) x 20 mm

S1008 Thin Osteotome Blade
           5" (12,7 cm) x 10 mm

S1009 Thin Osteotome Blade
           5" (12,7 cm) x 8 mm

S1020 Handle with Quick-Coupling End
           5" (12,7 cm)
           – OR –
S1021 Handle with Locking Nut
          6" (15,2 cm)

S1133 Radial Osteotome
           5" (12,7 cm) x 10 mm

S1120 Radial Osteotome
           5" (12,7 cm) x 12 mm

S1134 Radial Osteotome
           5" (12,7 cm) x 14 mm

S1121 Radial Osteotome
           5" (12,7 cm) x 16 mm

S1122 Radial Osteotome
           5" (12,7 cm) x 20 mm

S2007 Small Slap Hammer
           12" (30,5 cm)

9018 Case

 




Optional Blades for Flexible Osteotome System


 

Optional Strike Plate can be attached to the Handle for direct striking with a mallet.

Optional Curved Chisel Blades are designed to help loosen the cement/prosthesis interval in TKA tibial tray and femoral component revisions. The curved design is useful in working around pegs & fins to get posterior cement access. Also helpful with removal of other implants, i.e shoulder, ankle, etc.




OPTIONAL BLADES:
NOT INCLUDED IN SET

S1020-SP Strike Plate for Handle
           Diameter 1.625" (4,1 cm)
 
S1123 7.5" Extra Long Osteotome Blade
          7.5" (19,1 cm) x 8 mm

S1135 Radial Osteotome Medial Curve
           6.75" (17,1 cm) x 11 mm

S1136 Radial Osteotome Lateral Curve
           6.75" (17,1 cm) x 11 mm

S1137 Radial Osteotome Medial Curve
           5" (12,7 cm) x 11 mm

S1138 Radial Osteotome Lateral Curve
           5" (12,7 cm) x 11 mm

S1233-L 2" Flexible Left Curved Chisel
          2" (5,1 cm) x 8 mm

S1233-R 2" Flexible Right Curved Chisel
           2" (5,1 cm) x 8 mm

S1222 2.5" Chisel Blade
           2.5" (6,4 cm) x 8 mm

S1223 2.5" Chisel Blade
           2.5" (6,4 cm) x 10 mm

S1224 2.5" Chisel Blade
           2.5" (6,4 cm) x 12 mm

S1225 2.5" Chisel Blade
           2.5" (6,4 cm) x 20 mm

S1229 5" Chisel Blade
           5" (12,7 cm) x 8 mm

S1228 5" Chisel Blade
           5" (12,7 cm) x 10 mm

S1231 5" Chisel Blade
           5" (12,7 cm) x 12 mm

S1230 5" Chisel Blade
           5" (12,7 cm) x 20 mm

S1227 5.5" Long Chisel Blade
           5.5" (12,7 cm) x 8 mm

S1232 7.5" Extra Long Chisel Blade
          7.5" (19,1 cm) x 8 mm

S1234 8.5" Extra Long Chisel Blade
          8.5" (21,6 cm) x 8 mm

S1235 9.5" Extra Long Chisel Blade
          9.5" (24,1 cm) x 8 mm

S1236 10.5" Extra Long Chisel Blade
          10.5" (26,7 cm) x 8 mm


S1237 11.5" Extra Long Chisel Blade
          11.5" (29,2 cm) x 8 mm


S1238 12.5" Extra Long Chisel Blade
          12.5" (31,8 cm) x 8 mm


Download Product Brochure (PDF)

TOP





Foster Cement Osteotome

Designed to help remove a UKA/TKA component

 
Designed by Scott A. Foster, MD



Foster Cement Osteotome

Features a large handle and striking platform. The ultra hard titanium nitride coating helps to extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

Foster Cement Osteotome

Product No: 5232
Osteotome Width: 6.7 mm
Overall Length: 8.5" (21,6 cm)
Handle Length: 5.75" (14,6 cm)
Download Product Brochure (PDF)

TOP





Gelbke Freer Cement Trimmer/Nerve Hook with TiN Coating

Designed to facilitate cement removal during total and partial knee replacement

 
Designed by Martin K. Gelbke, MD


Consists of a freer elevator on one end and a nerve hook on the other.

Nerve hook accesses "tough to reach" corners of the knee.

Particularly useful for use with an ultra-congruent polyethylene insert, where trial liners are typically not used, once the final components have been placed.

Ultra hard titanium nitride coating helps to extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

Product No: 5007
Overall Length: 9.25" (23,5 cm)
Blade Width at End: 5 mm
Hook Depth: 5 mm
Download Product Brochure (PDF)

TOP





Lotke Offset Osteotome

Designed to remove osteophytes from the posterior femoral condyles during knee arthroplasty

 
Designed by Paul Lotke, MD


Lotke Offset Osteotome

Lotke Offset Osteotome

Product No: 4935
Overall Length: 9" (22,9 cm)
Blade Width: 13 mm
Download Product Brochure (PDF)

TOP





Modified Lambotte Osteotomes

Designed with a striking platform, plus a cross-bar hole to help control rotational stability and assist with removal

 
 


Modified Lambotte Osteotomes

Modified Lambotte Osteotomes

Six (6) sizes available — from 1/4” to 1-1/2” in 1/4” increments.

Cross-bar and case included in complete set.

The two smallest sizes have an 1/8" hole in which an 1/8" pin (not included) can be used as a cross bar.

 

Product No's:

5350-00 [Complete Set w/Case]

Also available individually:

5350-25 [1/4”]
Overall Length: 9” (22,9 cm)
Osteotome Width: .25” (6.4 mm)


5350-50 [1/2”]
Overall Length: 9” (22,9 cm)
Osteotome Width: .5” (12.7 mm)

5350-75 [3/4"]
Overall Length: 9" (22,9 cm)
Osteotome Width: .75" (19 mm)

5350-100 [1”]
Overall Length: 9” (22,9 cm)
Osteotome Width: 1” (25.4 mm)

5350-125 [1-1/4”]
Overall Length: 9” (22,9 cm)
Osteotome Width: 1.25” (31.8 mm)

5350-150 [1-1/2”]
Overall Length: 9” (22,9 cm)
Osteotome Width: 1.5” (38.1 mm)

5350-CASE [Case]
Dimensions: 12.25" x 11.25" x 1"
(31,1 x 28,6 x 2,5 cm)

5350-CB [Cross Bar]
Overall Length: 4.375" (11,1 cm)
Download Product Brochure (PDF)

TOP





Mini-lexer Osteotomes

Helpful in osteophyte and cement removal

   


Mini-lexer Osteotomes

Small, thin osteotomes helpful in osteophyte and cement removal in total joint surgery. Larger handle helps with better control.

Product No’s:

5270-01 [4mm Wide]
Blade Width: 4 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)


5270-02 [6mm Wide]
Blade Width: 6 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)


5270-03 [10mm Wide]
Blade Width: 10 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)


5270-04 [12mm Wide]
Blade Width: 12 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
Download Product Brochure (PDF)

TOP





Mueller-Type Cement Removal Instruments

Used for cement removal in the knee, hip, and shoulder

   


Mueller-Type Cement Removal Instruments

Mueller-Type Cement Removal Instruments

Product No's

S7500-00 [Complete Set with Case] Non-CE Countries

S7500-01 [Complete Set with Case] CE Countries

(Top to Bottom):

1) Narrow Cement Removal Gouge, Short
Product No: S7505
Shaft Length: 15 cm
Gouge: 9 mm, negative


2) Narrow Cement Removal Gouge, Long
Product No: S7507
Shaft Length: 24 cm
Gouge: 9 mm, negative

3) Narrow Offset Cement Removal Gouge
Product No: S7510
Shaft Length: 24 cm
Gouge: 9 mm, negative


4) Acetabular Chisel
Product No: S7515
Shaft Length: 24 cm
Chisel: 7.5 mm

5) Offset Chisel
Product No: S7520
Shaft Length: 15 cm
Chisel: 9 mm


6) Flared Angle Gouge
Product No: S7525
Shaft Length: 24 cm
Gouge: 9 mm, positive, angle 15° downward

7) Wide Gouge
Product No: S7530
Shaft Length: 24 cm
Gouge: 11.5 mm, negative


8) “V” Splitter
Product No: S7535
V-Shaped Chisel: 7 mm

9) Saddle Punch
Product No: S7587
Shaft Length: 24 cm
Punch: 16.5 mm x 6.5 mm

10) Cement Splitting Osteotome
Product No: S7590
Shaft Length: 24 cm

11) Cement Removal Osteotome, Short
Product No: S7595
Shaft Length: 15 mm
Osteotome: 8 mm

12) Cement Removal Osteotome, Long
Product No: S7597
Shaft Length: 24 cm
Osteotome: 8 mm


13) 4.4mm Drill
Product No: S7540

14) 4.4mm Drill Guide
Product No: S7545

15) 6.4mm Drill
Product No: S7550

16) 6.4mm Drill Guide
Product No: S7555

17) Straight Cement Removal Hook
Product No: S7560
Hook Curette: 10 mm

18) Curved Cement Removal Hook
Product No: S7565
Hook Curette: 10 mm

19) Cross Bar
Product No: S7570

20) 7mm T-Handle Conical Tap
Product No: S7575

21) 9mm T-Handle Conical Tap
Product No: S7580

22) Slotted Mallet
Product No: S7585

9075 [Case]

Optional Instruments:



8247-00 [T-Handle Chuck & Key]

8247-01 [T-Handle Chuck Only]

8247-02 [Chuck Key Only]
Download Product Brochure (PDF) – Non CE Countries
Download Product Brochure (PDF) CE Countires

TOP





Offset Gouge for Posterior Osteophyte Removal in TKA

An offset gouge with a rounded edge designed to more effectively remove osteophytes from round posterior condyles during total knee arthroplasty

 
Designed by Robert Steensen, MD


Offset Gouge for Posterior Osteophyte Removal in TKA


Product No: 3731
Overall Length: 11" (27,9 cm)
Blade Width: .815" (2 cm)



Download Product Brochure (PDF)


TOP





Ring Curettes

 
 


Ring Curettes
Product No's:

5150 [Straight, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.75" (22,2 cm)

5152 [Straight, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.75" (22,2 cm)

5154 [Straight, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.75" (22,2 cm)

5156 [Bent, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.5" (21,9 cm)

5157 [Bent, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.5" (21,9 cm)

5158 [Bent, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.5" (21,9 cm)
Download Product Brochure (PDF)

TOP





Robb Cement Curette

Designed to help remove cement around a hip or knee prosthesis

 
Designed by William Robb, MD


Robb Cement Curette

Made of Delrin

Product No: 5635
Overall Length: 8" (20,3 cm)
Freer End: 5 mm
Cup End: 10 mm
Download Product Brochure (PDF)

TOP





Sarraf Cement Trimmer

Two-in-one instrument designed for cement removal during arthroplasty surgery

 

 

 

 

 
Designed by Khaled M. Sarraf, MD



Sarraf Cement Trimmer

The curved semicircular tip is congruent to most tibial plates and femoral condylar implants, helping to facilitate removal of excess cement, especially at the tight posterior aspect

The small scoop-end tip assists in excising unset cement



Ultra hard titanium nitride coating helps to extend curette life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion, while helping to eliminate metal transfer and protect the implant surface

Product No: 5212
Overall Length: 7.75" (19,7cm)
Download Product Brochure (PDF)

TOP





Sarraf Spearhead Cement Exciser

Two-in-one instrument designed for cement removal during arthroplasty surgery

 

 

 

 

 
Designed by Khaled M. Sarraf, MD



Sarraf Spearhead Cement Exciser

The curved semicircular tip is congruent to most tibial plates and femoral condylar implants, helping to facilitate removal of excess cement, especially at the tight posterior aspect

The spearhead tip assists in excising and shaping the unset cement



Ultra hard titanium nitride coating helps to extend curette life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion, while helping to eliminate metal transfer and protect the implant surface

Product No: 5211
Overall Length: 7.75" (19,7cm)
Download Product Brochure (PDF)

TOP





Sarraf Toothed Curettes

Forward, straight, and reverse bent toothed curettes designed to aid in aid in all types of joint arthroplasty surgery, especially in scraping any articular chondral islands within the acetabulum during THA preparation

 
Designed by Khaled Sarraf, MD




Sarraf Toothed Curettes

Can also be used for the femoral canal in cemented and uncemented THA.

Valuable aid in revision arthroplasty (hip, knee, shoulder and ankle) for cement curettage.

Useful tool in hip and knee primary arthroplasty as well as shoulder, elbow and ankle arthroplasty procedures.

Ultra hard titanium nitride coating helps to extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

Product No's:

5174-00 [Set]

Also available individually:

5174-F [Forward Toothed Curette]
Overall Length: 11.5" (29,2 cm)
Handle Length: 5.5" (14 cm)
Curette Cup : 8 mm X 12 mm
Angled Down: 30°

5174-R [Reverse Toothed Curette]
Overall Length: 11.5" (29,2 cm)
Handle Length: 5.5" (14 cm)
Curette Cup : 8 mm X 12 mm
Angled Up: 30°


5174-S [Straight Toothed Curette]
Overall Length: 11.5" (29,2 cm)
Handle Length: 5.5" (14 cm)

Curette Cup : 8 mm X 12 mm
Download Product Brochure (PDF)

TOP





Scott Uni & Total Knee Cement Removing Curette

Sized, shaped and angled 90° to help with retrieval of posteriorly extruded cement behind the tibial component in both total and unicompartmental knee arthroplasty

 

 

 

 

 
Designed by Richard D. Scott, MD





Scott Uni & Total Knee Cement Removing Curette

Ultra hard titanium nitride coating helps to extend curette life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

Scott Uni & Total Knee Cement Removing Curette
Scott Uni & Total Knee Cement Removing Curette

Product No: 4247
Overall Length: 9.625" (24,4cm)
Overall Length: 5.25" (13,3cm)
Cup Size: 4/0
Download Product Brochure (PDF)

TOP





Wagner Osteotome Handle

Handle is designed for easier gripping, rotational control, and use with a mallet with a standard 1/4” Lambotte osteotome

 
Designed by Russell Wagner, MD


Wagner Osteotome Handle

 

Product No's

5348 [Handle Only]
Overall Length: 5.5" (14 cm)

5348-01 [1/4" Osteotome Only]
Overall Length: 8.875" (22,5 cm)
Download Product Brochure (PDF)

TOP





Whelan Flexible Chisel Guide

Designed to help stabilize a thin chisel blade until it's within the bone prosthesis interface

 
Designed by Edward J. Whelan, III, MD


Whelan Flexible Chisel Guide
Whelan Curved Chisel GuideWhelan Flexible Chisel Guide


Guide with sliding handle helps to stabilize a curved, thin flexible chisel blade until it's within the bone prosthesis interface. Chisel tip lets it hug prosthesis to help prevent perforation. Slap hammer threads into the handle and is designed to facilitate blade removal. Easily changeable disposable blades help assure sharpness.

 

Chisel blade features an ultra hard titanium nitride coating to help extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

Product No's:

5302-00 [Complete Set[

Included In Set / Replacement Parts:

5302-01 [Guide Only]
Overall Length: 5" to 8.75" (12,7 to 22,2 cm)

5302-02 [10mm Chisel Blade Only]
Overall Length: 4.625" (11,7 cm)
Blade Thickness: .020" (.51 mm)

3040 [Slap Hammer]

1015 [Sterilization Case]
Download Product Brochure (PDF)

TOP





Whelan Curved Chisel Guide

Designed to help stabilize a thin curved chisel blade
until it's within the bone prosthesis interface

 
Designed by Edward J. Whelan, III, MD


Whelan Curved Chisel Guide
Whelan Curved Chisel Guide
Whelan Curved Chisel Guide


Guide with sliding handle helps to stabilize a curved, thin flexible chisel blade until it's within the bone prosthesis interface. Chisel tip lets it hug prosthesis to help prevent perforation. Slap hammer threads into the handle and is designed to facilitate blade removal. Easily changeable disposable blades help assure sharpness.

 

Chisel blade features an ultra hard titanium nitride coating to help extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.

Product No's:

5302-00 [Complete Set[

Included In Set / Replacement Parts:

5302-01 [Guide Only]
Overall Length: 5" to 8.75" (12,7 cm to 22,2 cm)

5302-02 [10mm Chisel Blade Only]
Overall Length: 4.625" (11,7cm)
Blade Thickness: .020" (.51mm)

3040 [Slap Hammer]

1015 [Sterilization Case]
Download Product Brochure (PDF)

TOP





Wide Offset Osteotome

Designed to remove osteophytes from the posterior femoral condyles during knee arthroplasty

 
Designed by Paul Lotke, MD & Adam Rosen, DO


Wide Offset Osteotome
Product No: 4920
Overall Length: 9" (22,9 cm)
Blade Width: 18.5 mm
Download Product Brochure (PDF)

TOP



© 2023 Innomed, Inc. All rights reserved.