Click thumbnail image for details
|
|
|
|
|
|
|
NEW! Basic Screw Removal System
|
Flexible Osteotome System
|
NEW! Intramedullary Nail Removal System
|
NEW! Mini Lexer Gouges
|
|
|
|
|
|
|
|
|
Mini-lexer Osteotomes
|
Offset Punches
|
OrthoVise – Large
|
OrthoVise –Small
|
Removal Bits for the Discontinued Intramedullary Nail Extractor
|
|
|
|
|
|
|
NEW! Screw Removal Locking Pliers
|
Screw Removal Pliers
|
Screw/Pin Removal Locking Pliers
|
Star Bit Driver Set
|
Universal Screw Removal Instrument System
|
|
|
|
|
|
|
|
|
Whelan Flexible Chisel Guide
|
Whelan Curved Chisel Guide
|
|
|
|
|
|
Basic Screw Removal System
System designed to help remove damaged and broken screws from 1.5 to 7.0 mm |
|
|
|
|
|
|
|
Product No’s:
2022-00 [Complete Set]
Set Includes:
2022-01 [Screw Removal Pliers]
Overall Length: 8" (20,3 cm)
2022-02 [Mini Lexer Gouge – 4 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 4 mm
2022-03 [Mini Lexer Gouge – 6 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 6 mm
2022-04 [Mini Lexer Gouge – 10 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 10 mm
2022-05 [Extraction Screw for 1.5/2.0 mm]
Overall Length: 1.6" (4 cm)
2022-06 [Extraction Screw for 2.7/3.5/4.0 mm]
Overall Length: 1.6" (4 cm)
2022-07 [Extraction Screw for 4.5/5.0/6.5/7.0 mm]
Overall Length: 1.6" (4 cm)
2022-CASE [Case for Basic Screw Removal System]
2022-IP [Instruction Plate]
Dimensions: 7.875" x 3.65" (20 x 9,3 cm)
2022-SH [Sharp Hook]
Overall Length: 6.1" (15,5 cm)
2022-T [T-Handle with A0-End]
Overall Length: 5.9" (15 cm)
Handle Width: 3.15" (8 cm)
2023-01 [Extraction Bolt for 1.5 mm Screw]
Overall Length: 2.35" (6 cm)
2023-02 [Extraction Bolt for 2.0 mm Screw]
Overall Length: 2.35" (6 cm)
2023-03 [Extraction Bolt for 2.7 mm Screw]
Overall Length: 2.35" (6 cm)
2023-04 [Extraction Bolt for 3.5/4.0 mm Screw]
Overall Length: 2.35" (6 cm)
2023-05 [Extraction Bolt for 4.5 mm Screw]
Overall Length: 3.15" (8 cm)
2023-06 [Extraction Bolt for 5.0/6.5/7.0 mm Screw]
Overall Length: 3.94" (10 cm)
2023-07 [Trephine for 1.5 mm Screw]
Overall Length: 4.125" (10,5 cm)
2023-08 [Trephine for 2.0 mm Screw]
Overall Length: 4.125" (10,5 cm)
2023-09 [Trephine for 2.7 mm Screw]
Overall Length: 4.125" (10,5 cm)
2023-10 [Trephine for 3.5-4.0 mm Screw]
Overall Length: 4.125" (10,5 cm)
2023-11 [Trephine for 4.5 mm Screw]
Overall Length: 5.4" (13,7 cm)
2023-12 [Trephine for 5.0-7.0 mm Screw]
Overall Length: 5.4" (13,7 cm)
2024-01 [Spare Trephine Cutting End for 1.5 mm Screw]
Overall Length: 1.6" (4 cm)
2024-02 [Spare Trephine Cutting End for 2.0 mm Screw]
Overall Length: 1.6" (4 cm)
2024-03 [Spare Trephine Cutting End for 2.7 mm Screw]
Overall Length: 1.6" (4 cm)
2024-04 [Spare Trephine Cutting End for 3.5/4.0 mm Screw]
Overall Length: 1.6" (4 cm)
2024-05 [Spare Trephine Cutting End for 4.5 mm Screw]
Overall Length: 2.75" (7 cm)
2024-06 [Spare Trephine Cutting End for 5.0/6.5/7.0 mm Screw]
Overall Length: 2.75" (7 cm)
|
|
|
Flexible Osteotome System
Provides various osteotome blades for both hip and knee surgery |
|
|
|
|
|
|
|
Sharp, flexible blades are well suited for loosening implants from cement or bony ingrowth fixation.
Various blade widths and profiles allow great flexibility to follow the implant contours.
Modular handle is made of high impact surgical stainless steel and has a quick-coupling positive locking mechanism for ease of use and quick blade changes.
Slap hammer threads into the handle and is designed to facilitate blade removal.
System includes choice of handle style.
Product No’s:
S0011-00 [Set with Quick-Coupling Handle and Case]
S0012-00 [Set with Locking Nut Handle and Case]
Individual Instruments Included in Sets:
S1002 Thin Osteotome Blade
2.5" (6,3 cm) x 8 mm
S1003 Thin Osteotome Blade
2.5" (6,3 cm) x 10 mm
S1004 Thin Osteotome Blade
2.5" (6,3 cm) x 12 mm
S1005 Thin Osteotome Blade
2.5" (6,3 cm) x 20 mm
S1006 Curved Thin Osteotome Blade
2.5" (6,3 cm) x 12 mm
S1007 Curved Thin Osteotome Blade
5" (12,7 cm) x 20 mm
S1008 Thin Osteotome Blade
5" (12,7 cm) x 10 mm
S1009 Thin Osteotome Blade
5" (12,7 cm) x 8 mm
S1020 Handle with Quick-Coupling End
5" (12,7 cm)
– OR –
S1021 Handle with Locking Nut
6" (15,2 cm)
S1133 Radial Osteotome
5" (12,7 cm) x 10 mm
S1120 Radial Osteotome
5" (12,7 cm) x 12 mm
S1134 Radial Osteotome
5" (12,7 cm) x 14 mm
S1121 Radial Osteotome
5" (12,7 cm) x 16 mm
S1122 Radial Osteotome
5" (12,7 cm) x 20 mm
S2007 Small Slap Hammer
12" (30,5 cm)
9018 Case
|
|
|
Optional Blades for Flexible Osteotome System
|
|
|
|
Optional Strike Plate can be attached to the Handle for direct striking with a mallet.
Optional Curved Chisel Blades are designed to help loosen the cement/prosthesis interval in TKA tibial tray and femoral component revisions. The curved design is useful in working around pegs & fins to get posterior cement access. Also helpful with removal of other implants, i.e shoulder, ankle, etc.
OPTIONAL BLADES:
NOT INCLUDED IN SET
S1020-SP Strike Plate for Handle
Diameter 1.625" (4,1 cm)
S1123 7.5" Extra Long Osteotome Blade
7.5" (19,1 cm) x 8 mm
S1135 Radial Osteotome Medial Curve
6.75" (17,1 cm) x 11 mm
S1136 Radial Osteotome Lateral Curve
6.75" (17,1 cm) x 11 mm
S1137 Radial Osteotome Medial Curve
5" (12,7 cm) x 11 mm
S1138 Radial Osteotome Lateral Curve
5" (12,7 cm) x 11 mm
S1233-L 2" Flexible Left Curved Chisel
2" (5,1 cm) x 8 mm
S1233-R 2" Flexible Right Curved Chisel
2" (5,1 cm) x 8 mm
S1222 2.5" Chisel Blade
2.5" (6,4 cm) x 8 mm
S1223 2.5" Chisel Blade
2.5" (6,4 cm) x 10 mm
S1224 2.5" Chisel Blade
2.5" (6,4 cm) x 12 mm
S1225 2.5" Chisel Blade
2.5" (6,4 cm) x 20 mm
S1229 5" Chisel Blade
5" (12,7 cm) x 8 mm
S1228 5" Chisel Blade
5" (12,7 cm) x 10 mm
S1231 5" Chisel Blade
5" (12,7 cm) x 12 mm
S1230 5" Chisel Blade
5" (12,7 cm) x 20 mm
S1227 5.5" Long Chisel Blade
5.5" (12,7 cm) x 8 mm
S1232 7.5" Extra Long Chisel Blade
7.5" (19,1 cm) x 8 mm
S1234 8.5" Extra Long Chisel Blade
8.5" (21,6 cm) x 8 mm
S1235 9.5" Extra Long Chisel Blade
9.5" (24,1 cm) x 8 mm
S1236 10.5" Extra Long Chisel Blade
10.5" (26,7 cm) x 8 mm
S1237 11.5" Extra Long Chisel Blade
11.5" (29,2 cm) x 8 mm
S1238 12.5" Extra Long Chisel Blade
12.5" (31,8 cm) x 8 mm
|
|
|
Intramedullary Nail Removal Set
System designed to help remove an intramedullary nail |
|
|
|
|
|
|
|
Product No’s:
2027-20 [Intramedullary Nail Removal Set]
Set Includes:
2027-06 [Stabilizing Bar]
Overall Length: 5.9" (15 cm)
2027-07 [Open End Wrench]
Overall Length: 3.94" (10 cm)
2027-11A [Extraction Spreader Size 1]
Overall Length: 2.75" (7 cm)
Two included in set; product number is for one only
2027-11B [Extraction Spreader Size 1.5]
Overall Length: 2.75" (7 cm)
Two included in set; product number is for one only
2027-11C [Extraction Spreader Size 2]
Overall Length: 2.75" (7 cm)
Two included in set; product number is for one only
2027-11D [Extraction Spreader Size 2.5]
Overall Length: 2.75" (7 cm)
Two included in set; product number is for one only
2027-11E [Extraction Spreader Size 3]
Overall Length: 2.75" (7 cm)
Two included in set; product number is for one only
2027-12A [Extraction Assembly Rod & Slaphammer]
Overall Length: 18.5" (47 cm)
2027-12B [Extraction Push Rod]
Overall Length: 19" (48,3 cm)
2027-12C [Extraction Tightening Assembly]
Overall Length: 3" (7,6 cm)
Handle Width: 2.125" (5,4 cm)
2027-CASE [Case] Not Shown
|
|
|
Mini Lexer Gouges
Can be used to help remove bone from around screw heads or broken screws |
|
|
|
|
|
|
|
Product No’s:
2022-02 [Mini Lexer Gouge – 4 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 4 mm
2022-03 [Mini Lexer Gouge – 6 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 6 mm
2022-04 [Mini Lexer Gouge – 10 mm]
Overall Length: 7" (17,8 cm)
Gouge Width: 10 mm
|
|
|
Mini-lexer Osteotomes
Helpful in osteophyte and cement removal
|
|
|
|
|
|
|
|
|
Small, thin osteotomes helpful in osteophyte and cement removal in total joint surgery. Larger handle helps with better control.
Product No’s:
5270-01 [4mm Wide]
Blade Width: 4 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
5270-02 [6mm Wide]
Blade Width: 6 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
5270-03 [10mm Wide]
Blade Width: 10 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
5270-04 [12mm Wide]
Blade Width: 12 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
|
|
|
Offset Punches
Helps in removal of intramedullary nails
|
|
|
|
|
|
|
|
|
Used to help remove a hip prosthesis stem via a window in the shaft of the femur. Two sizes of offsets allow the punches to be used to tap on a distal portion of the hip stem, after a window has been made in the femur below the tip of the stem.
Product No's:
5125-01 [Small Offset]
Overall Length: 11" (27,9 cm)
Punch End Offset: .5" (1,3 cm)
Punch End Diameter: 7 mm
5125-02 [Large Offset]
Overall Length: 11" (27,9 cm)
Punch End Offset: 1.25" (3,2 cm)
Punch End Diameter: 7 mm
|
|
|
OrthoVise – Large |
|
|
|
U.S. Patent #D398,208 |
|
|
 |
Side Attachment Bolts
Allow a Large OrthoVise™ Slap Hammer (#3950) to be attached to the side of the device.
Available on Standard Large and Long Nose Large OrthoVise™ with Attachment Bolts only.
(Cannot be added on later.) |
|
Made of stainless steel
Models equipped with attachment bolts allow a slap hammer to be attached to the end, as well as to either side of the large OrthoVise™ (except Bent Jaw models), for greater adaptability
Bent Jaw models are not available with side attachment bolts, but have an end attachment nut to accept a Standard Slap Hammer (#3925)
Slap Hammers are designed with a hammer plate for the additional use of a mallet if desired
Product No’s:
STANDARD LARGE
3980 [Large]
Overall Length: 10" (25,4 cm)
with Attachment Bolts (two sides and end)
with Large OrthoVise™ Slap Hammer (#3950)
3980-01 [Large]
Overall Length: 10" (25,4 cm)
with Attachment Bolts (wtwo sides and end)
without Slap Hammer
3981 [Large]
Overall Length: 10" (25,4 cm)
without Attachment Bolts
without Slap Hammer
with End Attachment Nut that accepts a
Standard Slap Hammer (#3925)
LONG NOSE LARGE
3965 [Large]
OrthoVise™ Length: 12" (30,5 cm)
with Attachment Bolts
with Large OrthoVise™ Slap Hammer (#3950)
3965-01 [Large]
OrthoVise™ Length: 12" (30,5 cm)
with Attachment Bolts
without Slap Hammer
LONG NOSE LARGE BENT JAW
3966 [Large Bent Jaw]
OrthoVise™ Length: 11.5" (29,2 cm)
with Attachment Nut {end)
with Standard Slap Hammer (#3925)
3966-01 [Large Bent Jaw]
OrthoVise™ Length: 11.5" (29,2 cm)
without Slap Hammer
with Attachment Nut (end) that accepts a
Standard Slap Hammer (#3925)
SLAP HAMMERS FOR LARGE ORTHOVISE
3950 [Slap Hammer for Large OrthoVise]
For use with 3965's, 3980's, 3981
Overall Length: 16.5" (41,9 cm)
3925 [Standard Slap Hammer with 16" Rod]
For use with: 3966's
Overall Length: 16" (40,7 cm)
THREADED ADAPTERS FOR LARGE ORTHOVISE
3980-02 [Small Adapter]
Changes Male End of a Slap Hammer to Female.
Allows a Standard Slap Hammer (#3925) to be used with any Large OrthoVise™ with Attachment Bolts.
3980-03 [Threaded Adapting Screw – Large]
For use with 3965's, 3966's, 3980's, 3981.
Can be used to append the Large OrthoVise™ with an Attachment Bolt for use with a Large OrthoVise™ Slap Hammer (#3950)
|
|
|
OrthoVise – Small |
|
|
|
U.S. Patent #D398,208 |
|
|
|
Made of stainless steel
Models equipped with attachment bolts allow a slap hammer to be attached to the end of the OrthoVise™ for greater adaptability
Slap Hammer is designed with a hammer plate for the additional use of a mallet if desired
Product No’s:
STANDARD SMALL
3985 [Small]
OrthoVise™ Length: 8" (20,3 cm)
without Attachment Bolt
without Slap Hammer
3985-01 [Small]
OrthoVise™ Length: 8" (20,3 cm)
with Attachment Bolt (end)
with Small OrthoVise™ Slap Hammer (#3955)
3985-T [Small]
OrthoVise™ Length: 8" (20,3 cm)
with Attachment Bolt (endf)
without Slap Hammer
LONG NOSE SMALL
3975 [Small]
OrthoVise™ Length: 9.5" (24,1 cm)
without Attachment Bolt
without Slap Hammer
3975-01 [Small]
OrthoVise™ Length: 9.5" (24,1 cm)
with Attachment Bolt (end)
with Small OrthoVise™ Slap Hammer (#3955)
3975-T [Small]
Overall Length: 9.5" (24,1 cm)
with Attachment Bolt (end)
without Slap Hammer
SLAP HAMMER FOR SMALL ORTHOVISE
3955 [Slap Hammer for Small OrthoVise]
For use with: 3975's, 3985's
THREADED ADAPTER FOR SMALL ORTHOVISE
3985-03 [Threaded Adapting Screw – Small]
For use with: 3975's, 3985's
Can be used to append a Small OrthoVise™ with an Attachment Bolt for use with a Small OrthoVise™ Slap Hammer (#3955)
|
|
|
Removal Bits for the Discontinued Intramedullary Nail Extractor
Helps remove broken intramedullary nails from long bone |
|
|
|
Designed by Gary L. Kerns, RT(R) |
|
|
|
Product No’s:
8730-01 [3/8" (1.95 cm) Diameter Removal Bit]
8730-02 [1/2" (1,257 cm) Diameter Removal Bit]
|
|
|
Screw Removal Locking Pliers
Designed to solidly grip and clamp onto a screw head, broken screw, or pin for removal |
|
|
|
|
|
|
|
Product No: 2022-01
Overall Length: 8" (20,3 cm)
|
|
|
Screw Removal Pliers
Jaw designed to grasp onto a screw or screw head to help in removal |
|
|
|
|
|
|
|
Product No: 2020
Overall Length: 8" (20,3 cm)
|
|
|
Star Bit Driver Set |
|
|
|
|
|
|
|
Set consists of four star bits — T10, T15, T20, & T25, a handle which accommodates any of the above bits, and a sterilization case. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
The ergonomic, modular handle has two connection points, allowing for both straight and T-handle orientations.
Product No's:
5194-00 [4 Star Bits w/Handle & Case]
5194-01 [4 Star Bits w/Case only]
Also Available individually:
S0113 [Universal 4" (10,1 cm) Handle]
5194-10 [T10 with A/O End]
5194-15 [T15 with A/O End]
5194-20 [T20 with A/O End]
5194-25 [T25 with A/O End]
9003 [Case]
|
|
|
Universal Screw Removal Instrument System
Designed to remove solid and cannulated screws, including partial, broken, stripped, and submerged screws
|
|
|
|
|
|
|
 |
Product No’s:
S0010-00 [Complete System with Case]
S0113 [Universal Instrument Handle]
S0128 [1.5 mm Screw Extractor]
S0116 [2.5 mm Screw Extractor]
S0130 [3.5 mm Screw Extractor]
S0117 [1.5 mm Hex Driver]
S0114 [2.5 mm Hex Driver]
S0115 [3.5 mm Hex Driver]
S0132 [4.0 mm Hex Driver]
S0133 [5.0 mm Hex Driver]
S0136 [2.5 mm Cannulated Hex Driver]
S0137 [3.5 mm Cannulated Hex Driver]
S0138 [4.0 mm Cannulated Hex Driver]
S0139 [5.0 mm Cannulated Hex Driver]
S0118 [Large Cruciform Screwdriver]
S0119 [Small Cruciform Screwdriver]
S0141 [Mini Cruciform Screwdriver]
S0120 [Single Slot Screwdriver]
S0121 [2.2 mm Trephine]
S0122 [3.2 mm Trephine]
S0123 [4.2 mm Trephine]
S0124 [4.7 mm Trephine]
S0125 [7.2 mm Trephine]
S0127 [Universal Extractor - Shaft Only]
S0127-01 [Large Extraction Bolt Body]
S0127-03 [Small Extraction Bolt Body]
S0127-04 [Extractor Wrench]
S0129 [Pick]
S0140 [Cannulated Drive Extension]
9017 [Screw Removal Case Only]
Case Dimensions:
21" x 9.5" x 2.25 (53,4 x 24,1 x 5,7 cm) |
|
Used for removal of stripped hex screws, buried screws, and partial screws with broken screw heads. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
Screw Extractors
Unique thread design accommodates removal of stripped screws. The instrument “locks” into the screw head and allows removal once engaged. Designed to be used in a counter-clockwise direction.
Trephines
Designed to fit over submerged screws for extraction with minimal bone loss. Extraction is enhanced by the unique tooth design. Designed to be used in a counter-clockwise direction.
Universal Extractor
Designed to remove screws with heads partially or completely missing. The cone shaped head fully engages the remaining screw and optimizes the force needed for removal. The bolt is disposable and locks into place using a unique thread design. Designed to be used in a counter-clockwise direction.
Hex Drivers
Available in all standard hex sizes. Also offered in a cannulated shaft version for easier removal of buried screws.
Screwdrivers
Standard cruciform screwdrivers in large, small, and mini, and single slot.
Cannulated Drive Extension
Used when a longer instrument shaft is desired.
Pick
Used to remove fragments and bone or tissue from screw head.
Universal Instrument Handle
The single handle allows the surgeon to decide which direction is most efficient and comfortable. The quick-connect release mechanism allows for quick interoperative exchange.
|
|
|
Whelan Flexible Chisel Guide
Designed to help stabilize a thin chisel blade until it's within the bone prosthesis interface |
|
|
|
Designed by Edward J. Whelan, III, MD |
|
|
|
Guide with sliding handle helps to stabilize a curved, thin flexible chisel blade until it's within the bone prosthesis interface. Chisel tip lets it hug prosthesis to help prevent perforation. Slap hammer threads into the handle and is designed to facilitate blade removal. Easily changeable disposable blades help assure sharpness.
Chisel blade features an ultra hard titanium nitride coating to help extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
5302-00 [Complete Set[
Included In Set / Replacement Parts:
5302-01 [Guide Only]
Overall Length: 5" to 8.75" (12,7 to 22,2 cm)
5302-02 [10mm Chisel Blade Only]
Overall Length: 4.625" (11,7 cm)
Blade Thickness: .020" (.51 mm)
3040 [Slap Hammer]
1015 [Sterilization Case]
|
|
|
Whelan Curved Chisel Guide
Designed to help stabilize a thin curved chisel blade
until it's within the bone prosthesis interface |
|
|
|
Designed by Edward J. Whelan, III, MD |
|
|
|
Guide with sliding handle helps to stabilize a curved, thin flexible chisel blade until it's within the bone prosthesis interface. Chisel tip lets it hug prosthesis to help prevent perforation. Slap hammer threads into the handle and is designed to facilitate blade removal. Easily changeable disposable blades help assure sharpness.
Chisel blade features an ultra hard titanium nitride coating to help extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
5302-00 [Complete Set[
Included In Set / Replacement Parts:
5302-01 [Guide Only]
Overall Length: 5" to 8.75" (12,7 cm to 22,2 cm)
5302-02 [10mm Chisel Blade Only]
Overall Length: 4.625" (11,7cm)
Blade Thickness: .020" (.51mm)
3040 [Slap Hammer]
1015 [Sterilization Case]
|
|
|
© 2023 Innomed, Inc. All rights reserved.
|
