Click thumbnail image for details
|
|
|
|
|
|
| |
Calcaneal Lateral Column Spreader
|
Calcaneal Spreader
|
Calibrated Ortho Spreader with Slotted Tips
|
Chung T-Handle Retractors
|
|
|
|
|
|
|
|
Chung Weitlaner Retractor
|
Desai Clearview Open Blade Self-Retaining Retractor
|
Dodson Modular Retractor
|
Durst Arthrodesis Retractor Set
|
Extra Small Joint, Calcaneal and Small Bone Distractor
|
|
|
|
|
|
|
|
|
Faillace Ambidextrous Self-Retaining Retractors
|
Gurbani Joint Distractor/Compressor
|
Hendren Neuroma Retractor
|
Hendren Retractor
|
HFD Compressor/Distractors
|
|
|
|
|
|
|
HFD Self-Retaining Small Bone Spreader
|
J.B. Redler Retractor
|
NEW! Johnson Low Profile Foot & Ankle Retractors
|
Joint, Calcaneal, Small Bone Compressors
|
Joint, Calcaneal, Small Bone Compressor/Distractor
|
|
|
|
|
|
|
Joint, Calcaneal and Small Bone Compressor/Distractors with Speed Lock
|
Joint, Calcaneal and Small Bone Distractors
|
Kawell Short Army Navy Retractor
|
Large Pin Distractor and Compressor
|
NEW! Mantis Screwdriver Distractor
|
|
|
|
|
|
|
NEW! Modified Mini Hohmann Retractors
|
Monaco Small Space Retractor
|
OrthoLucent™ Mini Hohmann Retractors
|
Ortho Self-Retaining Retractor with Pin Guides
|
Slavitt Phalangeal Forceps
|
|
|
|
|
|
|
Stanton Forward
Ragnell Retractors
|
Stanton Forward
Rake Retractors
|
Stanton Forward
Senn Retractors
|
Strayer Retractor
|
Swanson Elevator
|
|
|
|
|
|
|
Weinraub Joint and Calcaneal Spreader
|
Wurapa Small JointCompressor and Distractor
|
|
|
|
|
|
Calcaneal Lateral Column Spreader
Used for lateral column lengthening of the calcaneus |
|
|
|
Designed by Keith L. Wapner, MD |
|
|
|
Product No: 1725
Pads: 14 mm x 12 mm
Arms Open to: 45 mm
verall Length: 4.25" (10,8 cm)
|
|
|
Calibrated Ortho Spreader with Slotted Tips
A lamina spreader with a very thin closed profile, designed to enable distraction in tight joint spaces like the subtalar and talonavicular joints |
|
|
|
Designed by Jason Bariteau, MD |
|
|
|
Product No: 1841
Overall Length: 6.75" (17,1 cm)
Prong Length: .5" (12,7 mm)
Calibrations: 10 mm to 35 mm
|
|
|
Chung T-Handle Retractors
Designed with a T-handle for easier holding and to help reduce finger and thumb fatigue |
|
|
|
Designed by Raymond Chung, MD |
|
|
|
Product No's:
1159 [Sharp Rake]
Overall Length: 4.5" (11,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1161 [Blunt Rake]
Overall Length: 4.5" (11,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1162 [Senn]
Overall Length: 4.5" (11,4 cm)
Blade Width: 6 mm
Blade Depth: 16 mm
1159-01 [Extended Sharp Rake]
Overall Length: 5.625" (14,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1161-01 [Extended Blunt Rake]
Overall Length:5.625" (14,4 cm)
Blade Width: 9 mm
Blade Depth: 7 mm
1162-01 [Extended Senn]
Overall Length: 5.625" (14,4 cm)
Blade Width: 6 mm
Blade Depth: 16 mm
|
|
|
Chung Weitlaner Retractor
Features long prongs allowing use of a small retractor in a small, but deep wound
|
|
|
|
Designed by Raymond Chung, MD
|
|
|
Prong lengths of 25mm and 30mm now available
with either sharp or blunt tips, in both 3x2 or 3x4 prong versions.
|
Particularly useful for volar approach to the distal radius in large patients and for mini-open rotator cuff surgery.
Product No’s:
BLUNT TIPS
5065 [2x3 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5065-01 [3x4 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5067 [2x3 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
5067-01 [3x4 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
SHARPS TIPS
5066 [2x3 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5066-01 [3x4 Prongs]
Blade Depth: 25 mm
Overall Length: 4.5" (11,4 cm)
5068 [2x3 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
5068-01 [3x4 Prongs]
Blade Depth: 30 mm
Overall Length: 4.5" (11,4 cm)
|
|
|
Desai Clearview Open Blade Self-Retaining Retractor
Open blade design allows clear visualization of soft tissue and neurovascular structures being retracted |
|
|
|
Designed by Sarang Desai, DO |
|
|
|
Tapered blades allows 90° deep soft tissue retraction and easy insertion into the wound.
Open blades also allow surgeon to work in open blade area, such as for gastroc recession surgery.
Product No: 1858
Overall Length: 7.25" (18,4 cm)
Blade Depth: 3" (7,6 cm)
Blade Width: 1.25" (3,2 cm)
|
|
|
Dodson Modular Retractor
Designed to help expose a small to medium size bone for internal fixation—can be used for distal radius, ulna, humerus, and fibula fractures |
|
|
|
Designed by Mark A. Dodson, MD
U.S. Patent #9,161,745 B2 |
|
|
|
Allows the limb to be rotated (pronated or supinated) without loss of exposure. The hohmann retractors have three hole sizes which allow for a variety of positioning angle options using the teeth of the self-retaining retractor, or can also be positioned in-between the teeth. The hohmann is placed around the bone, and thus reduces the force on the soft tissues while increasing exposure. Can be used in the forearm to treat radius and ulna shaft fractures, humerus fractures, as well as in the leg for fibula fractures.
The Optional OrthoLucent™ blade is made of a strong, lightweight carbon fiber PEEK composite material, which is completely radiolucent, helps to prevent from marring component surfaces, and can be steam sterilized.
U.S. Patent # 9,161,745 B2
Product No: 1838-00 [Set]
Set consists of one self-retaining retractor, two stainless steel mini-hohmann retractor blades, and a sterilization case.
Replacement Parts:
1838-01 [Retractor Only]
Overall Length: 5.5" (14 cm)
1838-02 [Stainless Steel Blade Only – One]
(Two included in set – one with this product number)
Overall Length: 5.25" (13,3 cm)
Blade Width: 3/8" (9 mm)
1025 [Sterilization Case Only]
Optional Parts:
1838-02R [OrthoLucent™ Blade Only – One]
Overall Length: 5.25" (13,3 cm)
Blade Width: 3/8" (9 mm)
|
|
|
Durst Arthrodesis Retractor Set
Designed for exposure and retraction when performing arthrodesis of the MTP joint |
|
|
|
Designed by Heiko Durst, MD |
|
|
|
Metatarsal Retractor
One-step preparation and retraction of soft tissue around the head of the
1st metatarsal when performing
arthrodesis of the MTP joint
Phalangeal Retractor
One-step preparation and retraction of soft tissue around the base of the proximal phalanx of the big toe when performing arthrodesis of the MTP joint
Product No's:
1642-00 [Arthrodesis Retractor Set]
Set includes:
1642-01 [Phalangeal Retractor]
Overall Length: 6.625" (16,8 cm)
1642-02 [Metatarsal Retractor]
Overall Length: 7" (17,8 cm)
|
|
|
Extra Small Joint, Calcaneal and Small Bone Distractor
Two hole sizes allow for easier pin size selection and helps with distraction in fracture and osteotomy procedures
|
|
|
|
|
|
|
|
1/16" (1.6 mm) & 3/32" (2.4 mm)
Pin Hole Diameters
Product No: 4210-XSD [Extra Small Distractor]
Overall Length: 4.25" (10,8 cm)
|
|
|
Faillace Ambidextrous Self-Retaining Retractors
Handle is designed to be rotated away from the surgeon after placement if desired |
|
|
|
Designed by John J. Faillace, MD |
|
|
|
Product No's:
1579 [4 Teeth]
Overall Length: 6" (15,2 cm)
Prong Depth: 38 mm
Prong Width: 18 mm
1580 [7 Teeth]
Overall Length: 7.5" (19,1 cm)
Prong Depth: 38 mm
Prong Width: 34 mm
1579-01 [Small – 4 x3 Teeth]
Overall Length: 5.25" (13,3 cm)
Prong Depth: 20 mm
Prong Width: 18 mm / 13 mm
|
|
|
Gurbani Joint Distractor/Compressor
Versatile joint distractor/compressor provides 360° freedom for arthroscopic or open procedures of foot, ankle, hand, and wrist joints
|
|
|
|
Designed by Naren G. Gurbani, MD |
|
|
|
The surgeon puts the pins in the bone, then slides the holes of the device over the pins and distracts or compresses—the device can be locked in either direction. Especially useful for arthroscopy of subtalar, talo-navicular, calcaneo-cuboid, and wrist joints. The T-wrench helps provide precise, controlled manipulation.
Pin Hole Sizes:
.15" (3,5 mm) and .182" (4,5 mm)
Product No’s:
4208-00 [Set with Case]
Includes: Distractor/Compressor, T-Wrench, and Case
4208-01 [Distractor/Compressor Only]
Dimensions: 6" w x 5" h (15,2 cm x 12,7 cm)
Distracts up to: 3" (7,6 cm)
Compresses down to: .5" (1,3 cm)
4208-TW [T-Wrench]
Dimensions: 3" w x 3" h (7,6 cm x 7,6 cm)
1025 [Sterilization Case]
|
|
|
Hendren Neuroma Retractor
Narrow tines are delicate on tissue, but sturdy enough to retract bone |
|
|
|
Designed by Douglas H. Hendren, MD |
|
|
 |
Useful during neuroma and other surgeries,the retractor helps free assisting personnel and helps provide excellent exposure.
Product No’s:
1680-01 [Small]
Overall Length: 4.25" (10,8 cm)
1680-02 [Large]
Overall Length: 5.5" (14 cm)
|
|
|
Hendren Self-Retaining Retractor
Gentle on tissue, effectively holds back subcutaneous fat, and can be useful for retracting the deltoid muscle firmly
|
|
|
|
Designed by D.H. Hendren, MD
|
|
|
 |
Product No: 1750
Overall Length:
6.5" (16,5 cm)
Blade Size: 22 x 14 mm
|
|
|
HFD Compressor/Distractors
Dial mechanism helps allow precise control of inserted wires in small bone surgery, for maintaining a position, compressing or distracting
|
|
|
|
|
|
|
|
On the small units, a .125" (3,2 mm) pin can be used in the holes of the thumbwheel for leverage.
There are two versions of the small and large size: one all stainless steel, one with radiolucent arms.
Radiolucent arms are a PEEK/Carbon Fiber composite.
All models are steam sterilizable.
Product No's:
1834 [Small — All Stainless Steel]
Dimensions: 51 mm x 57 mm
Maximum Arm Opening: 1.35" (3,4 cm)
Holes: For pins up to .045" (1,1 mm) & .062" (1,6 mm)
1834-R [Small with Radiolucent Arms]
Dimensions: 51 mm x 57 mm
Maximum Arm Opening: 1.35" (3,4 cm)
Holes: For pins up to .045" (1,1 mm) & .062" (1,6 mm)
1836 [Large]
Overall Length: 4" (10,2 cm)
Maximum Arm Opening: 2.25" (5,7 cm)
Holes: For pins up to .082" (2,0 mm) &.125" (3,2 mm)
1836-R [Large with Radiolucent Arms]
Overall Length: 4" (10,2 cm)
Maximum Arm Opening: 2.25" (5,7 cm)
Holes: For pins up to .082" (2,0 mm) & .125" (3,2 mm)
|
|
|
HFD Self-Retaining Small Bone Spreader
Versatile spreader featuring narrow tapered blades which, when together, make a small wedge to enter a tight bone interface or osteotomy
|
|
|
|
|
|
|
|
Blades feature a non-aggressive grip pattern that can be used when spreading apart bone as well as providing retraction of soft tissue in a smaller wound.
Product No: 1829
Overall Length: 4.5" (11,4 cm)
Blade Depth: 28 mm
Blade Width Tapers from: 8 mm to 5 mm
|
|
|
Johnson Low Profile Foot & Ankle Retractors
Designed for soft tissue retraction in the foot and ankle |
|
|
|
Designed by Michael Johnson, MD |
|
|
|
Product No’s:
1636-01 [Straight Handle]
Overall Length: 7.5" (19 cm)
Blade Width: .41" (1 cm)
1636-02 [Double Bent Handle]
Overall Length: 8.875" (22,5 cm)
Blade Width: .41" (1 cm)
|
|
|
Joint, Calcaneal and Small Bone Compressors
Designed for compression in fracture and osteotomy procedures
|
|
|
|
|
|
|
|
Two hole sizes allow for
ease of pin size selection:
1/16" (.062") (1.6 mm) &
3/32" (.094") (2.4 mm)
Product No’s:
4210-SC [Small Compressor]
Overall Length: 6" (15,2 cm)
4210-XSC [Extra Small Compressor]
Overall Length: 4.25" (10,8 cm)
|
|
|
Joint, Calcaneal, Small Bone Compressor/Distractor
Selection lever switches the mechanism from compression to distraction |
|
|
|
|
|
|
|
Simply squeeze the handle one time after direction selection to engage the mechanism. Two hole sizes for pin size selection. Calibrated ratchet handle.
Product No: 4865-LS
Overall Length: 8.5" (21,6 cm)
Holes For: .062" & .094" (1.6 & 2.5 mm) K-wire Pins
|
|
|
Joint, Calcaneal and Small Bone Compressor/Distractors with Speed Lock
Speed lock helps allow precise control and prevents unintended release |
|
|
|
|
|
|
|
Helpful in a variety of indications.
Thumbscrews help prevent the unit from sliding on the pins.
Product No's:
Closed Arms with Speed Lock
4216-LS [Large]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 8" (20,3 cm)
4216-SS [Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 6" (15,2 cm)
4216-XS [Extra Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 4.5" (11,4 cm)
Outspread Arms with Speed Lock & Thumbscrews
4217-LB [Large]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 8" (20,3 cm)
Closed Arms with Speed Lock & Thumbscrews
4217-SS [Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 6" (15,2 cm)
|
|
|
Joint, Calcaneal and Small Bone Distractors
Two hole sizes and two arm designs allow for easier pin size selection and helps with distraction in a variety of indications
|
|
|
|
Thumbscrew Modification
Designed by Kelly McCormick, MD
|
|
|
 
|
Product No’s:
SMALL
Overall Length: 6" (15,2 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4210-SS [Closed Arms]
4210-SB [Outspread Arms
LARGE
Overall Length: 8" (20,3 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4210-LS [Closed Arms]
4210-LB [Outspread Arms]
Thumbscrews help prevent the unit from sliding on the pins
SMALL WITH THUMBSCREWS
Overall Length: 6" (15,2 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4215-SS [Closed Arms]
4215-SB [Outspread Arms]
LARGE WITH THUMBSCREWS
Overall Length: 8" (20,3 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
4215-LS [Closed Arms]
4215-LB [Outspread Arms]
|
|
|
Kawell Short Army Navy Retractor
A short (4.75") handled Army Navy retractor, especially useful with a gastrocnemius recession |
|
|
|
Designed by Ron Kane, DPM |
|
|
|
Product No: 1148
Overall Length: 4.75" (12,1 cm)
Large End Blade Length: 1.75" (4,4 cm)
Large End Blade Width: .625" (1,6 cm)
Small End Blade Length: 1" (2.5 cm)
Small End Blade Width: .3125" (0,8 cm)
|
|
|
Large Pin Distractor and Compressor
Larger 1/8" (3,2 mm) pin hole size for extra sturdy distraction or compression |
|
|
|
|
|
|
|
Product No's:
4233 [Large Pin Distractor]
Hole Diameters: For .125" (3,2 mm) K-wire Pins
Overall Length: 8" (20,3 cm)
4234 [Large Pin Compressor]
Hole Diameters: For .125" (3,2 mm) K-wire Pins
Overall Length: 8" (20,3 cm)
|
|
|
Mantis Screwdriver Distractor
Designed to help provide stable distraction across difficult-to-reduce fractures using two seated screwdrivers* |
|
|
|
Designed by J. Albert Diaz, MD |
|
|
|
Accommodates screwdrivers of varying size for use with both small and large fragment systems.
Allows for distraction of difficult-to-reduce fractures without the need to drill additional holes outside of the plate.
The plate can be locked with a screw once length has been restored.
*Screwdrivers not included.
Product No: 3654
Overall Length: 7.5" (19,1 cm)
Pin Hole Diameters: 4.5, 5.5, & 8.5 mm
Leg & Pin Hole Depth: .7" (17,5 mm)
|
|
|
Modified Mini Hohmann Retractors
Used for small bone surgery |
|
|
|
Designed by Jeffrey Lawton, MD |
|
|
|
Product No’s:
1665 [Blade: 6 mm Wide / 35 mm Drop]
Overall Length: 5.875" (14,9 cm)
Blade Width: 6 mm
Blade Drop: 35 mm
1665-01 [Blade: 6 mm Wide / 17 mm Drop]
Overall Length: 5.5" (14 cm)
Blade Width: 6 mm
Blade Drop: 17 mm
1666 [Blade: 8 mm Wide / 35 mm Drop]
Overall Length: 5.875" (14,9 cm)
Blade Width: 8 mm
Blade Drop: 35 mm
1666-01 [Blade: 8 mm Wide / 17 mm Drop]
Overall Length: 5.5" (14 cm)
Blade Width: 8 mm
Blade Drop: 17 mm
1666-02 [Blade: 8 mm Wide / 17 mm Drop] NEW!
Overall Length: 6.25" (15,9 cm)
Blade Width: 8 mm
Blade Drop: 17 mm
1666-LG [Blade: 8 mm Wide / 72 mm Drop] NEW!
Overall Length: 7.125" (18,1 cm)
Blade Width: 8 mm
Blade Drop: 72 mm
|
|
|
Monaco Small Space Retractor
Designed to retract adipose tissue and surrounding soft tissue structures through a small incision for open plantar fasciotomies, neuroma excisions and the lateral release during bunion surgery |
|
|
|
Designed modified by Spencer Monaco, DPM, FACFAS |
|
|
|
Also useful for various hand surgeries such as open carpal tunnel surgery.
Product No: 1887-01
Overall Length: 4.25" (10,8 cm)
Blade Depth: 18 mm
Blade Width: 12 mm
Blade Lip: 3.5 mm
|
|
|
OrthoLucent™ Mini Hohmann Retractors
Radiolucent, lightweight retractors |
|
|
|
Designed by Jeffrey Lawton, MD |
|
|
|
The carbon fiber PEEK material is strong, lightweight, completely radiolucent, can be steam sterilized, and helps to prevent from marring component surfaces.
Product No's:
1594-R [8 mm Blade]
Overall Length: 6.875" (17,5 cm)
Blade Width: 8 mm
1597-R [16 mm Blade]
Overall Length: 6.875" (17,5 cm)
Blade Width: 16 mm
|
|
|
Ortho Self-Retaining Retractor with Pin Guides
Designed for small joint use with pin guides that are set back to allow either direct distraction or distraction with pins |
|
|
|
Designed by Sean Dunn, DPM |
|
|
|
Other Uses Include:
• Osteotomy distraction (such as the Evans or Cotton in the foot)
• Joint distraction for arthodesis or lengthening applications
• Fracture distraction
Features Include:
• Parallel pin guides allow pins up to 2 mm
•
Serrated outside blades extend .4" (1 cm) beyond end of pin guides
Product No: 1842-02
Overall Length: .5" (16,5 cm)
Blade Width: 7 mm
Blade Extension (beyond guides): .4" (1 cm)
Blade Thickness: 1.68 mm
Pin Guide Length: 1.25" (3,2 cm)
Pin Guide Internal Diameter: .085" (2,1 mm)
|
|
|
Slavitt Phalangeal Forceps
Designed to enable the surgeon to provide joint distraction and stability during prosthesis placement at the base of the proximal phalanx of the lesser digits
|
|
|
|
Designed by Jerome Slavitt, DPM
|
|
|
|
|
Helps to distract the joint and hold the bone, allowing easier access to the base. Can also be used for digital fusions to hold bones better for drilling and cutting applications.
Product No: 1163
Overall Length: 6" (15,2 cm)
Clamp Internal Opening Diameter: 4 mm
|
|
|
Stanton Forward Retractors
Designed to work as “tissue pushers”, helping to enhance exposure by allowing the surgeon or an assistant to push forward the opposite side of the wound while retracting (or not) the nearer side
|
|
|
|
Designed by John L. Stanton, MD, FACS
|
|
|
 |
Helps the assistant to hold the wound open without becoming fatigued and having to reach around to the opposite side of the wound to use another retractor.
|
|
|
Stanton Forward Ragnell Retractor
|
|
|
|
Designed by John L. Stanton, MD, FACS
|
|
|
|
Product No: 4510-01
Overall Length: 6.25" (15,9 cm)
Blade Offset: 1.625" (4,1 cm)
Blade Width: 3.1 mm
Blade Depth: Shallow 13 mm, Deep 19 mm
|
|
|
Stanton Forward Rake Retractors
|
|
|
|
Designed by John L. Stanton, MD, FACS
|
|
|
|
Product No's:
4514-01 [Shallow]
Overall Length: 6.25" (15,9 cm)
Blade Offset: 1.625" (4,1 cm)
Blade Width: 5.1 mm
Blade Depth: 10 mm
4514-02 [Deep]
Overall Length: 6.25" (15,9 cm)
Blade Offset: 1.625" (4,1 cm)
Blade Width: 5.1 mm
Blade Depth: 17 mm
|
|
|
Strayer Retractor
A lamina spreader with long thin blades designed to retract the soleus muscle and soft tissue for isolation and exposure of the gastrocnemius fascia for release |
|
|
|
Designed by Irvin Oh, MD |
|
|
|
Product No: 1869
Overall Length: 9.25" (23,5 cm)
Blade Length: 3.5" (8,9 cm)
Blade Width: .6" (1,5 cm)
|
|
|
Swanson Elevator
Angular design helps to go around bone for retraction and elevation — especially useful in small bone surgery of the hand/wrist and foot/ankle |
|
|
|
Designed by Richard Ferkel, MD |
|
|
|
Product No: 1644
Overall Length: 6.375" (16,2 cm)
Blade Depth: .75" (1,9 cm)
|
|
|
Weinraub Joint and Calcaneal Spreaders
Designed to assist in the opening of small joints of the hand and foot for the application of fusion and graft techniques |
|
|
|
Designed by G. Weinraub, DPM, FACFAS |
|
|
|
Provides excellent joint exposure without blocking intra-articular or osteotomy access. Helps prevent slippage or falling out of the joint by placing the arms on either side of the area to be distracted, driving two pins and opening the joint.
Product No's:
1870 [Standard 1.6 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .062" (1/16") (1.6 mm)
1870-SL [Speed Lock 1.6 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .062" (1/16") (1.6 mm)
1872 [Standard 2.8 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .11" (7/64") (2.8 mm)
1872-SL [Speed Lock 2.8 mm]
Overall Length: 7" (17,8 cm)
Pin Diameter: Up to .11" (7/64") (2.8 mm)
|
|
|
Wurapa Small JointCompressor and Pin Distractor
Designed to allow one-handed manipulation and deployment once fixation pins are placed
|
|
|
|
Designed by Raymond K. Wurapa, MD
|
|
|
|
|
Designed to simplify several small joint procedures:
- Useful for intercarpal stabilization while performing ligament reconstructions (e.g. scapholunate ligament repair/reconstruction)
- Preparation of small bone non-unions before bone grafting and fixation
- Preparation of small joints for arthrodesis (e.g. partial wrist fusion)
- Distract and better evaluate small joints before determining final management.
|
Pins should be cut short above the pin guides to allow full access to the operative site.
Product No’s:
1751 [Double 1.1 & 1.6 mm Hole Compressor]
Compresses From: 28 mm
Overall Length: 4.625" (11,7 cm)
1752 [Double 1.1 & 1.6 mm Hole Distractor]
Distracts to: 46 mm
Overall Length: 4.625" (11,7 cm)
1753 [Single 1.1 mm Hole Compressor]
Compresses From: 28 mm
Overall Length: 4.5" (11,4 cm)
1754 [Single 1.1 mm Hole Distractor]
Distracts to: 46 mm
Overall Length: 4.5" (11,4 cm)
|
|
|
© 2023 Innomed, Inc. All rights reserved.
|
